Brian Rouse - Midatlanticpas.org
Download
Report
Transcript Brian Rouse - Midatlanticpas.org
Understanding and Preventing
Repetitive Stress Injuries
Brian Rouse MSPT, OCS
Goals
Understanding normal body function
Identifying how position affects function
Guidelines for workspace assessment
Tips/exercises to improve body function
Defining Ergonomics
Involves adapting a task to a person, not making
the person change for the task
Altering the task, the environment, or both
http://www.wark.csiro.au/library/gifs/ergonomics.gif
Anatomic Efficiency
Joints
– Two bones meet and move against each other
Primary damage is from compression and friction
Areas of joint loaded unevenly = faster damage
Muscles
– Control joint movement, hold body in place
Work to produce forces or stabilize against gravity
If too much work is performed = muscle fails
Focus of ergonomics is DOING LESS WORK
Fighting Gravity
http://www.posturepal.com/assets/images/sci2.jpg
Consequences of Poor Posture
Cumulative Trauma/Repetitive Stress
– “Itis” means inflamed/overstressed
Tendonitis, bursitis, synovitis, arthritis
Tissues that work too hard will complain
Permanent Body Changes
– Arthritis cartilage damage does not regenerate
– Disc degeneration does not reverse
– Nerve compression can block signals
Carpal tunnel, pinched nerve, sciatica
Ergonomics Made Simple
Use body positions requiring less work
– Muscles sustain less damage from overworking
Use other objects to hold body in place
– A muscle at rest cannot be overworked
The Easy Way is the Best Way
Challenges in Ergonomics
Designing for “Average”
Lack of variance in work tasks
Time constraints for job completion
Costs of modifying environment
http://solutions.3m.com/wps/portal/3M/en_US/ergonomics/home/advice/workspacecomfortguide/
Guidelines: Head/Neck
Monitor positioned 20”-30” from eyes
– Use arms length as a guide
– Top of monitor should be at/slightly lower than
eye level
– Use document holders to read while typing
Head should be centered over shoulders
– Use “turtle” method to draw head back
Shoulders/Arms
Shoulders/upper arms perpendicular to floor
Elbows close to sides/torso, at 90 degrees
Forearms on armrests, allowing shoulders to
drop
Do not rest on hard/sharp armrest edges
Keyboard
Keyboard trays for height/proximity
Wrist needs to be neutral, not bent back
– Wrist rests pad hard desktop, hold wrist up
Use only when not typing or mousing
“Float” hands over keyboard while typing
Mouse next to keyboard, easy to reach
– Move mouse with elbow/forearm, not wrist
Chair Adjustment
Chair height level
– Hips/trunk at 90 degree angle or slightly more
– Feet flat on floor
Can use foot stool if needed
– Thighs should fit under desk
Or keyboard tray if needed
Seat pan should be 1-2” wider than hips on
either side
Chair Adjustment
Backrest
– Position lumbar support in natural curve of back
If insufficient, add towel roll/etc. behind curve
– Shoulder blades able to rest against chair back
– Should allow user to tilt back 15 degrees
Common Mistakes
Head position too far forward
Monitor set at diagonal to worker
Forearms not on armrests
Shoulder blades off of backrest
Lumbar curve in chair not flush with back
Monitor set too low
Feet not flat on floor/stool
Considerations for Standing Tasks
Alter height of workstation or user
Have footrest to allow weight shift of legs
Organize workstation to allow controls/tools
to be in close proximity
Have a chair in proximity, using for tasks
that can be seated or just rests
Use proper footwear and anti-fatigue mats
Standing Workstations
Precision tasks (writing): 5 cm above elbow height
Light tasks (assembly): 5-10 cm below elbow
height
Heavy tasks (downward force): 20-40 cm below
elbow height
Canadian Centre for Occupational Health and Safety;
www.ccohs.ca.oshanswers/ergonomics/
Task Modification
http://www.uhs.berkeley.edu/facstaff/ergonomics/lab/tools.shtml
20-20-20 rule
– 20 minutes of work
– 20 second rest (bare minimum)
– Look away from screen
Adjust schedule as able to break up work
Desk Stretching
Longer holds are better, try for up to 30 seconds
when possible
Perform before/after work, during breaks
Order does not matter, just frequency (1+ hours)
Warning Signs/Symptoms
Pain--severe intensity or long duration (2-3 days)
Changes in sensation
– Numbness, tingling, burning
Unexplained weakness/fatigue
Difficulty with coordination/clumsiness
Abnormal swelling/redness
Other Considerations
Strengthening postural muscles with
exercise (yoga, strength training, etc)
Sleep and proper diet aid in prevention of
injury and healing
Health problems (hypertension, diabetes)
can increase risk of injury development
Resources
University of California—Los Angeles
http://ergonomics.ucla.edu/index.html
University of California—San Diego
http://blink.ucsd.edu/Blink/External/Topics/Policy/0,1162,4008,00.html
Canadian Centre for Occupational Health and Safety
http://ccohs.ca/oshanswers/ergonomics/