Transcript www.aryansexport.com

2008-09
www.powerpointpointpresentationon.blogspot.com
• INTRODUCTION
• COMPANY PROFILE
• MISSION & VISION
• PRODUCTS
• CERTIFICATION
• PHOTOVORE ROBOT
• CIRCUIT DIAGRAM AND
•
•
•
LAYOUT
APPLICATION
CONCLUSION
QUERIES
• Genus Power Infrastructure Ltd. Is a Kailash group
company .
Genus has ISO 9001:2000 certificate for design and
production .
Currently, Genus has over 100,000 sq. ft. of built up areas
in Jaipur(Rajasthan) and Haridwar (Uttaranchal) where it
carries out its manufacturing processes.
Genus is one of the biggest manufacturing units of Energy
meters and Power electronics in the country.
Genus has now become a truly global player in the Power
Electronics field by setting up manufacturing facilities in
•
•
•
Brazil and marketing offices in Singapore and U.S.A., UK ,
•
COMPANY PROFILE
•CHAIRMAN – Mr. I. C. Agarwal
• Executive Director - Mr. Raj Agarwal
•Director (Marketing) - Mr. J. K. Agarwal
• Annual turnover : annual turnover scaling new heights to
over USD300million.
• Product manufacturing : Electronic Energy Meters,
Inverters, Batteries, UPS.
• Customers : Reliance Energy , BSNL - Bangalore /
MISSION & VALUES
MISSION
Delight customers with high quality, innovative
products and services in electrical and electronic
fields.
VALUES
Exceed customer satisfaction in terms of quality, price,
on-time delivery.
Develop long term relationships with the
vendors/business partners to support our goals.
•
•
•
ELECTRICAL METER
•An electric meter or energy meter is a device
that measures the amount of electrical energy
supplied to or produced by a residence ,
business or machine.
The most common type of electricity meter:Electromechanical induction.
Solid state meters.
Prepayment meters
•
BATTERY
•Genus will be launching a full range of
batteries to expand its product range and
support its Inverters with best backup
power available.
Features:Outstanding power and life
Quick Initial Charge and recharge
Easy and low maintenace
Compaq Construction
•
INVERTER
•An inverter is an electrical device that converts
direct current(DC) to alternating current(AC).
The inverter performs the opposite function of a
rectifier.
Genus successfully introduced most advanced
Sure Sine Wave Inverter technology in India.
Inverter produced by genus are:1. Standard Inverters
2. Compact Inverters
•
•
•
APPLICATION
•Uninterruptible power supplies.
•Induction heating.
•HVDC power transmission.
•Variable-frequency drives
UPS
•An Uninterruptible power
supply (UPS), also known as
a battery back-up, provides
emergency power.
The UPS consists of three main
components:
Rectifier
Battery
•
APPLICATION
•UPS is typically used to protect computers
,data centers ,telecommunication
equipment or other electrical
equipment where an unexpected
power disruption could cause
injuries, fatalities, serious
business disruption or data loss
ICU facility in Hospitals.
•
CERTIFICATION
• ISO 9001:2000 certification for manufacturing
• ISO 9001:2000 certification for implementation of Power Projects and SCADA
Automation
• ISO 9001:2000 certification for commissioning and installation of Power
Distribution networks
• R & D Lab recognized by the Ministry of Science & Technology, Government of
India
• CDOT approval for Line Card Hybrid & Resistor Networks
• CDOT approval for contract manufacturing
• IECQ for quality of components
• ISI mark for Energy Meters
• CE approval for Energy Meters (Single Phase and Three Phase)
• EMI / EMC certifications
• ETDC certification for Inverters
PHOTOVORE
The Photovore ,a light-eating robot .The photovore is a robot that chases light,
and is perhaps the simplest of all sensor algorithms .It remains active for many
years
without needing their owner's helping hand .A small robot, eating nothing but
light.
one of the photovore is shown below
It is easy enough if a rechargable battery-stores the energy in chemical form.
Inside look of Photovore
• Components :-
1 x 1M
1 x BC549C
2 x 470K
2 x BC559C
3 x 100K
2 x 1N4148
1 x 150E
1 x Green LED 3mm
2,5 m tinned copper wire 0.4
2 x 74HC00
qmm(0.7 mm thick,21AWG)
2 x BPW41(photodiodes)
1 m thin isolated copper
1 x 4700uF 16V radial
wire, several colors
1 x 100uF 16V radial
5 cm heat-shrinkable tubing
2 x 47uF 16V radial
1 x Set of 2 ultralight
1 x 100N ceramic
wheels,Robbe nr.
1 x 5M variable resistor,
90330057
small, horizontal
2 x Clock "Takehope" nr.
1 x 250K variable resistor,
199010
small, horizontal
1 x Solar Panel Panasonic
1 x 10M
BP-378234
1 x 2M2
1 x Print Pitronics Photovore
Circuit Diagram of Photovore
How it Turns ON ?
A large capacitor can be used for storage.
The circuit shown waits until the solar
panel raises the voltage over the capacitor
(4700uF) above some 2.7 V before
switching on the oscillator. If the voltage
drops below about 2.2 V, the transistors
turn off and the capacitor is recharged. The
run/charge ratio depends on the amount of
light.
It is close
to sunset
when
thethe
runsolar
timepanel has charged the capacitor
The
circuit
turns the
robot on
when
drops to zero.
(4700uF)
to about 2.7 volts, and off if the voltage drops below some 2.2 volts. The diodes and
the
first BC559 also limit the voltage supplied to the robot to about 4 V. The LED lits up
when the limiter is active. If the voltage (in direct sunlight) still rises nothing will be
damaged, but the clock stops. The robot doesn't feel hungry anymore... Now let's look
at the `brain' of the Photovore. The prototype seaches vigorously for better sunlight,
while neatly sidestepping most obstacles. Apart from two clocks with wheels attached,
it
PC board assembly
How it search the light and
avoid obstacles in between its path . . . ?
The Photovore doesn't move in the direction you might expect, but at right
angles
to it, in half circles around the stationary wheel. The feeler behind the rolling
wheel cannot hit any (new) obstacles , because the feelers also describe arcs
with
the opposite wheels as their centers.
In this manner the photovore
reaches to that part of the
room where maximum
intensity of light is coming
after avoiding all obstacles in
its path .
Feelers plays very important
role in avoiding obstacles
coming in between its path,
where eyes play important
role in controlling motor
motion and also searching
brightest light intensity
available in surrounding for
charging its rechargeable
Performance:-
• 17 rpm for the seconds hand means that the hour hand goes round in 3.5
minutes.
• The Photovore below is equipped with two clocks and has no trouble with
•
a 20 degree incline - running continuously, under a heavy overcast, with
the sun as its only source of power. The robot weighs 104 grams.
During the daytime, even in the shade. But when it has to work itself from
the middle of the room to the window , the solar panel will sometimes not
even supply that one milli-amp .
• A large capacitor can be used for storage. The circuit shown waits until
the solar panel raises the voltage over the capacitor (4700uF) above
some 2.7 V before switching on the oscillator.
• If the voltage drops below about 2.2 V, the transistors turn off and the
capacitor is recharged. The run/charge ratio depends on the amount of
APPLICATION
•P-N photodiodes are used in similar
applications to other photodetecors.
•Photovore robot are used as a smoke
detectors.
•They are also widely used in various medical
applications, such as detectors for computed
tomography.
•They are also used in pulse oximeters.
CONCLUSION
Finally , in my 30 days of training at
GENUS , i have successfully done my training
and learn about photovore which is one of the
robots of next generation with high intelligency
in them .
THANKS FOR
YOUR VALUABLE
TIME