Transcript CMOS transistors as Switches

EE 4271 VLSI Design, Fall
2008
CMOS Combinational Gate
CMOS Combinational Circuits



Implementation of logic gates and other structures using
CMOS technology.
Basic element: transistor
2 types of transistors:



n-channel (nMOS) and p-channel (pMOS)
Type depends on the semiconductor materials used to implement
the transistor.
We want to model transistor behavior at the logic level in order
to study the behavior of CMOS circuits  view pMOS and nMOS
transistors as swithes.
9-Apr-16
Combinational Logic
PJF - 2
CMOS transistors as Switches
3 terminals in CMOS transistors:
 G: Gate
 D: Drain
 S: Source
nMOS transistor/switch
X=1 switch closes (ON)
X=0 switch opens (OFF)
9-Apr-16
pMOS transistor/switch
X=1 switch opens (OFF)
X=0 switch closes (ON)
Combinational Logic
PJF - 3
Networks of Switches



Use switches to create networks that
represent CMOS logic circuits.
To implement a function F, create a network
s.t. there is a path through the network
whenever F=1 and no path when F=0.
Two basic structures:


9-Apr-16
Transistors in Series
Transistors in Parallel
Combinational Logic
PJF - 4
Transistors in Series/Parallel
nMOS in Series
X
a
Y
a
X:X
Y:Y
b
nMOS in Parallel
Path between
points a and b
exists if both
X and Y are 1
 X•Y
a
X
X
Y
X:X’
Y:Y’
b
9-Apr-16
a
X:X
b
b
Y:Y
b
Path between
points a and b
exists if either
X or Y are 1
 X+Y
pMOS in Parallel
pMOS in Series
a
Y
a
Path between
points a and b
exists if both
X and Y are 0
 X’•Y’
a
X
b
Combinational Logic
Y
a
X:X
b
Y:Y
Path between
points a and b
exists if either
X or Y are 0
 X’+Y’
b
PJF - 5
Networks of Switches (cont.)
In general:

1.
2.
3.
4.
nMOS in series is used to implement AND logic
pMOS in series is used to implement NOR logic
nMOS in parallel is used to implement OR logic
pMOS in parallel is used to implement NAND logic
Observe that:



9-Apr-16
1 is the complement of 3, and vice-versa
2 is the complement of 4, and vice-versa
Combinational Logic
PJF - 6
CMOS Inverter
+V
X
F = X’
X
F = X’
Logic symbol
GRD
Transistor-level schematic
Operation:
 X=1  nMOS switch conducts (pMOS is open)
and draws from GRD  F=0
 X=0  pMOS switch conducts (nMOST is open)
and draws from +V  F=1
9-Apr-16
Combinational Logic
PJF - 7
Fully Complementary CMOS Networks
Basic Gates
9-Apr-16
Combinational Logic
PJF - 8
Fully Complementary CMOS
Complex Gates
Given a function F:
1.
First take the complement of F to form F’
2.
Implement F’ as an nMOS net and connect it to GRD
(pull-down net) and F.
3.
Find dual of F’, implement it as a pMOS net and
connect it to +V (pull-up net) and F.
4.
Connect switch inputs.
9-Apr-16
Combinational Logic
PJF - 9
Fully Complementary CMOS Networks
Complex Gates - Example
F = (A+B)(A+C’)
F’ = A’B’+A’C=A’(B’+C)
9-Apr-16
Combinational Logic
PJF - 10
CMOS Transmission Gate (TG)
9-Apr-16
Combinational Logic
PJF - 11
2-input MUX Using CMOS TGs
9-Apr-16
Combinational Logic
PJF - 12