Transcript Aucun titre de diapositive

Standard Version – CD12
• Inputs: 8 - 4 Digital and 4 configurable for Digital or 10 bit Analog
• Outputs:4 - 8 amp Relays or 700ma Transistors (1 PWM)
• 4 Line by 18 Character fully user programmable display
• 6 User configurable Buttons.
• Back-Lit Display
• Modbus Ascii Communications via programming port
• Double the memory of Millenium II
Standard Version – CD20
• Inputs: 12 - 6 Digital and 6 configurable for Digital or 10 bit Analog
• Outputs:8 - 8 amp Relays or 700ma Transistors (4 PWM)
• 4 Line by 18 Character fully user programmable display
• 6 User configurable Buttons.
• Back-Lit Display
• Modbus Ascii Communications via programming port
• Double the memory of Millenium II
Economy Version – CB Series
• Same features as Standard Controller without Display and Buttons
• 12 and 20 I/O Models
• Cost Saving Design
• 10 bit Analog inputs on DC powered controllers
• Relay and Transistor models
• Modbus Ascii Communications via programming port
• Double the memory of Millenium II
Expandable Version – XD10
• Inputs:6 - 2 Digital and 4 configurable for Digital or 10 bit Analog
• Outputs:4 - 8 amp Relays or 700ma Transistors (1 PWM)
• 4 Line by 18 Character fully user programmable display
• 6 User configurable Buttons.
• Back-Lit Display
• Modbus Ascii Communications via programming port
• 4 times the memory of Millenium II
• Wide array of expansion modules
Expandable Version – XD26
• Inputs:16 - 10 Digital and 6 configurable for Digital or 10 bit Analog
• Outputs:10 – Relays(8x8a / 2x5a) or 700ma Transistors (4 PWM)
• 4 Line by 18 Character fully user programmable display
• 6 User configurable Buttons.
• Back-Lit Display
• Modbus Ascii Communications via programming port
• 4 times the memory of Millenium II
• Wide array of expansion modules
Expansion Options
•
•
•
•
•
•
•
Expand up to 50 I/O
RS485 Modbus Communication module
Modbus TCP/IP Ethernet Communication module
2 Input 2 Output 10 bit analog expansion module
6, 10, and 14 I/O expansion modules
2 modules can be added to 1 base controller
Simplified wiring and installation of modules
Expansion Modules
XA03 – PT100 Module
XA04 – Analog I/O Module
XA03
•
•
•
•
3 PT100 Inputs
10 bit resolution
Heating Control
Cooling Control
XA04
•
•
•
•
•
2 Analog 10 bit Inputs
2 Analog 10 bit Outputs
0-10VDC Input
0-20ma Input
Direct Connection of PT100
XN03
•
•
•
•
•
Serial RS485
Modbus RTU or Ascii
4 16 bit Input registers
4 16 bit Output registers
Perfect for external HMI’s
XN05
•
•
•
•
•
Ethernet Modbus TCP/IP
Static or Dynamic IP
8 16 bit Input registers
8 16 bit Output registers
Easy SCADA Integration
Communications
Modem Communications
M3MOD – Modem Interface
•
•
•
•
•
•
Interfaces to wired or GSM cell phone modems
Monitor remote applications via PC or cell phone
Send text messages to cell phones
Control the M3 via cell phone or PC
Using M3 Alarm software use your PC to log alarms
Modify or download a new program remotely
M3 Alarm Software Screen
1: Local/Remote
2:Menu Bar
3:Icon Bar
4:Alarm Display
Millenium 3 offers the largest display available on
micro-PLC’s. The 4 line by 18 character display
provides the ability to add more descriptive text to
applications.
No More Abbreviations!!!
Programming and Communications Interfaces
•
•
•
•
Standard RS232 DB9 Programming Cable
New USB cable- No converter required
New Bluetooth Interface – Program wirelessly
All interfaces can be used to access the Modbus
functionality of the programming port.
DC to DC Converters
•
•
•
•
Input 9-18 VDC output 12 VDC
Input 16-36 VDC output 24 VDC
Nominal Power 10W
For use in applications with power fluctuations
Millenium 3
Software Enhancements
Software Enhancements
•
•
•
•
•
•
•
Function Block Programming
SFC – Sequential Flow Control
Combine Function Block & SFC
Ladder Logic
Faster Cycle Time
Create Macro – Make your own functions!
New Simulation features
Software Enhancements
All timers grouped into a single icon with dynamic operation.
Timer LI Function Block
Added function for starting with OFF Time First
Software Enhancements
Timers can now be configured with an external set point. The value can
come from another function block or an Analog Input / Potentiometer.
Software Enhancements
Timers can now be adjusted in units other than .1s All timers can be set for a base
unit of .1s or Hours/Minutes/Seconds or based on the cycle time of the controller.
Software Enhancements
The controller can now be switched into run mode without resetting non-retained values.
Software Enhancements
 “Save values at power break” added on all function with “actual values”
 “Modification allowed” added on all function with parameters
 “Edit” menu, added function “re-do” in addition to the “undo” (multi-level)
 Added new function block
controller
which gives information about the state of the
Software Enhancements
Data can now be sent and retrieved through the programming port. The
SL In and SL Out function blocks give access to 48 16 bit words. 24 In and
24 Out. A PLC or PC can be used to log data or set values in the controller
Software Enhancements
Input and Output blocks can now be assigned a custom icon.
Software Enhancements
New simulation mode features allows easy verification of
Time Prog Function block events.
Software Enhancements
Slider bars have been added to easily modify analog values
durring simulation.
Millenium 3
Applications
Software Enhancements