Module #6A – Clinical Laboratory Testing - Urinalysis
Download
Report
Transcript Module #6A – Clinical Laboratory Testing - Urinalysis
Unit #6A – Clinical
Laboratory Testing Urinalysis
Cecile Sanders, M.Ed.,
MT(ASCP),
CLS (NCA)
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Urinary
system is
an excretory
system
Renal System
(reproduced with permission
from Baylor College of Medicine)
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Collection
and Preservation of Urine
– Urinalysis performed for two purposes
Check
for metabolic by-products
Observe physical, chemical and microscopic
characteristics
– Types of Specimens
First
morning urine specimen is preferred
Mid-stream (urine caught from middle of urine
stream)
Clean catch (patient must cleanse urethral
opening prior to urinating and catching urine)
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Handling
–
–
–
–
and preserving specimens
Examine within 1 hour of collection OR
Refrigerate at 4-6° C for up to 8 hours
Preservatives (least ideal)
When urine sits at room temperature
Bacteria
multiply
Glucose decreases
Casts and cellular elements decompose
Unit #6A – Clinical Laboratory
Testing - Urinalysis
– Color of urine
Yellow
– dilute urine is usually lighter in color;
concentrated urine is usually dark
Red – may have blood present
Brown/black – may be associated with melanoma
Yellow-brown or green-brown – may be
associated with liver conditions such as
hepatitis or cirrhosis
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Light
yellow, brown, and dark yellow
urines
Unit #6A – Clinical Laboratory
Testing - Urinalysis
– Transparency
Urine
normally transparent
Turbid – may be associated with crystals that
settle out of urine at room or refrigerator
temperature
Cloudy – may be associated with UTI OR
crystals
Unit #6A – Clinical Laboratory
Testing - Urinalysis
– Specific gravity is the ratio of the weight
of a given volume of the solution (urine) to
the weight of an equal volume of water
Indicates
concentrations of dissolved chemicals
such as glucose, salts, etc.
The result of the kidneys’ ability to concentrate
urine
Normal values – 1.005-1.030 (Ave = 1.015)
Usually measured by dip stick or refractometer
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Chemical Examination of Urine
– Reagent strips
Test
pads are for pH, protein, glucose, ketone,
bilirubin, blood, urobilinogen, specific gravity,
leukocytes and bacteria
Used only once and discarded
Performing the chemical tests by reagent strip
– Perform within 1 hour after collection OR
– Allow refrigerated specimens to return to room
temperature
– Dip strip in fresh urine and compare color of pads to the
color chart after appropriate time period
– Instruments are available which detect color changes
electronically
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Urine
Multistix – reading dipstick
results manually; colors are matched to
those on the bottle label; timing is
critical for each pad.
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Multistix
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Bayer
Clinitek automatically reads a
urine dipstick and prints out results
Unit #6A – Clinical Laboratory
Testing - Urinalysis
Principle
of chemical tests
– pH measures degree of acidity or alkalinity
of urine
– Presence of protein (proteinuria) is an
important indicator of renal disease, such
as pyleonephritis
– Presence of glucose (glycosuria) indicates
that the blood glucose level has exceeded
the renal threshold, such as in diabetes
Unit #6A – Clinical Laboratory
Testing - Urinalysis
– Ketones are excreted when the body metabolizes
fats incompletely (ketonuria), such as in diabetes
– Bilirubin is a byproduct of the breakdown of
hemoglobin. Its presence may be an indication of
liver disease, bile duct obstruction or hepatitis
– Presence of blood may indicate infection, trauma
to the urinary tract or bleeding in the kidneys
– Urobilinogen is a degradation product of bilirubin
formed by intestinal bacteria. It may be increased
in hepatic disease or hemolytic disease
Unit #6A – Clinical Laboratory
Testing - Urinalysis
– Nitrite formed by gram negative bacteria
converting urinary nitrate to nitrite. Presence of
nitrites in fresh urine can indicate infection – in an
old urine, nitrites can be positive without an
infection
– Leukocytes usually indicate infection
– Specific gravity reflects kidney's ability to
concentrate urine
Normal values
– Negative results for glucose, ketones, bilirubin,
nitrites, leukocyte esterase and blood
– Protein negative or trace
– pH 5.5-8.0
– Urobilinogen 0.2-1.0 Ehrlich units