Transcript Chap5

Chapter 5: Carbon Chemistry
A Dioxin Molecule
Organic Chemistry 101:
Single bonds: formed when one pair of electrons is shared
between two carbon atoms.
Double bonds: involve the sharing of two pairs of electrons.
Triple bonds: The sharing of three pairs of electrons.
Unsaturated carbon compound: when multiple bonds
occur between carbon atoms.
Saturated carbon compound: when there are only single
bonds between the carbon atoms.
Functional group: an atom or group of atoms that can be
attached to the carbon atoms.
Hydrocarbons
Hydrocarbon: the most common organic compound and
contains just hydrogen and carbon.
Alkanes: the C atoms have single bonds and occur as straight
or branched chains and as rings.
Alkenes: have a double bond between two of the carbons.
Alkynes: have a triple bond between two of the carbons.
Substitution reactions: one or more hydrogens are replaced
by atoms of another element. (CH4 + Cl2  CH3Cl + HCl)
Addition reaction: some of the electrons in the unsaturated
bonds are used to bind with additional atoms. (C2H4 + H2 
C2H6.)
Structural formula: shows the orientation of the atoms in
either two or three dimensions.
Condensed structural formula: used to save space and are
written in terms of carbon units.
Molecular formula: gives the numbers of each type of atom
in the molecule. (i.e. Butane’s molecular formula: C4H10.
Isomers: compound with the same molecular formula, but
different structural formulas.
Geometric isomers: compounds with double carbon bonds
preventing the free rotation between the two carbon atoms.
Another common way to abbreviate structure in organic
compounds includes the following:
https://www.chemgapedia.de/vsengine/vlu/vsc/en/ch/2/vlu/alkane/alkane_struktur.vlu/Page/vsc/en/ch/2/oc/stoffklassen/systematik_struktur/acyclische_verbindungen/gesaettigte_kohlenwasserstoffe/alkane/stru
kturvielfalt.vscml.html
Naming and Types of Hydrocarbon Compounds
Alkanes:
Prefixes for the Number of Carbon Atoms
Number of Carbons
Prefix
1
2
3
4
Meth
Eth
Prop
But
5
6
7
Pent
Hex
Hept
8
9
10
Oct
Non
Dec
Steps to follow carbon-chemistry nomenclature
1) Name of the compound is based on the longest continuous
chain of carbon atoms. The root name indicates the
number of carbon atoms in the chain, and the ane (for a
single bond) is added to the root name.
2) The carbon atoms in the longest continuous chain are
numbered sequentially from one end. If substituent groups
are added to the chain, the numbering starts at the end of
the chain that will give the lowest number of the substituent
groups.
3) All groups attached to the longest continuous chain are
identified by the number of the carbon atom to which they
are attached and the name of the substituent group. If the
substituent group is derived from an alkane, it is named by
removing the ane and replacing it with yl. If two or more
groups are present, they are listed in alphabetical order.
Steps to follow carbon-chemistry nomenclature, cont.
4) A prefix is used to denote multiple substitutions by the
same kind of group. This prefix is ignored when deciding the
alphabetical order rule.
Let’s examine the following molecule and name it.
CH3
CH2—CH3
CH3—C—CH2—CH—CH2—CH2—CH3.
CH3
4-ethyl-2,2-dimethylheptane
Alkene and Alkyne nomenclature
1) Find the longest chain containing the double and/or triple
bond. The stem name is based on the number of carbon
atoms, as is the case for alkanes. A prefix number is used
to indicate the position of the carbon atom immediately
before the double or triple bond, and a suffix (ene or yne)
is used to indicate whether the compound is an alkene or
an alkyne.
2) The chain is numbered so that the double/triple bond will
have the lowest location. If both types of bonds are
present, the double bond takes precedence in establishing
the start of the numbering sequence.
Alkene and Alkyne nomenclature, cont.
3) If more than one double bond is present, the location
numbers are indicated first and the ending is given as diene,
triene, etc. If a triple bond is also present, the double bonds
are designated as the main stem, dropping the e, and the
triple bond is designated by an extra suffix.
4) Unsaturated subtituents are named by using the prefix of
the chain after replacing the terminal e with yl. For example,
propene becomes propenyl.
Name that molecule…
—
CH3—C==CH—C—
— C—CH2—CH3
C==CH2
3-methyl-1,3-octdien-5-yne
Cyclic Hydrocarbons: the carbon atoms are arranged in a
ring. The cyclic hydrocarbons do not form flat structures like
aromatic hydrocarbons and are thus distinguished from
them.
For simple rings, without attached substituent groups, the
prefix cyclo is used to distinguish a ring structure.
For example, cyclohexane would consist of six singly-bonded
carbon atoms in a ring structure. Cyclohexene would consist
of six atoms with one double bond in a ring structure and
cyclohexyne would consist of six carbon atoms with one
triple bond in a ring structure.
Aromatic (Aryl) Hydrocarbons: built upon a benzene ring
of six hydrogen atoms and 6 carbon atoms.
It was originally thought that benzene consisted of
alternating single and double bonds, but it was eventually
realized that the ring has six identical bonds, neither single
or double. Modern representation of the benzene ring show
it as a hexagon enclosing a circle, indicating that it consists
of a ring of delocalized (p) electrons.
Aromatic hydrocarbons nomenclature
Polycyclic Aromatic Hydrocarbons (PAH)
PAHs consist of two or more benzene rings which form a
planar structure. They are formed from the incomplete
combustion of other hydrocarbons.
Functional Groups: consist of specific bonding configurations
of atoms in organic molecules and usually, but not always,
contain at least one element other than carbon or hydrogen.
Organohalide compound: a hydrocarbon that contains at
least one atom of F, Cl, Br or I.
Nomenclature is simple using prefixes such as fluoro (for F),
Chloro (for Cl), Bromo (for Br) and Iodo (for I).
Polychlorinated biphenyls (PCBs) consist of two benzene
rings joined by a single bond with attached chlorine atoms.
Chlorinated phenols: These can be significantly hazardous
wastes. They have been used a wood preservativesa
benzene ring that has an attached OH functional group and
at least one Cl atom attached.
Esters: special group of compounds formed by a
condensation reaction involving carboxylic acids and
alcohols.
Figure 5-15. Structure of DDT. The molecule consists of two
benzene rings joined by a chlorinated ethane group. Each ring
has a Cl atom substituting for a H atom. The IUPAC name for
this molecule would be dichlorodiphenlytrichloroethane.
http://southernersjournal.com/?tag=running-behind-ddt-truck
http://www.whale.to/vaccines/ddt_spraying.html
http://grossmontcuyamaca.blogspot.com/2012/06/grossmont-college-students-to-study.html
Structure of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). The
rings are numbered as shown. Note that the chlorine atoms
occur in positions 2, 3, 7, and 8. The tetra prefix indicates that
there are four chlorine atoms.
http://frogstorm.com/?p=2915
http://burningissues.org/car-www/medical_effects/yushchenko-dioxin-poisen.htm
Organooxygen Compounds: hydrocarbons that have at least
one oxygen-containing functional group.
Alcohols: contain a hydroxyl functional group attached to an
alkane. i.e. ethanol
Phenols: benzene rings in which one hydrogen is replaced
with an OH functional group. i.e. poison ivy toxin and ascorbic
acid.
Ketones: contain a carbonyl group (C=O) that occurs in the
alkane molecule bonded to two other carbon atoms. i.e.
acetone
Carboxyl acids: organic acids that contain a hydroxyl group
attached to a carbonyl group. (-COOH). i.e. acetic acid
Ethers: consist of two carbon groups connected by an oxygen.
i.e. dimethyl ether
Organonitrogen Compounds
Nitrogen is an important component of several functional
groups, most notably amino acids and amines.
Amino acid: characterized by the presence of an amino group
(NH2).
Amines: derivatives of ammonia (NH3), in which one or more
of the hydrogen atoms are replaced by alkyl groups (functional
groups derived from alkanes) or an aromatic ring.
Aminocarboxyl acids: (-CH2CO2H) groups bonded to
nitrogen atoms.
Carbamates: derived from carbamic acid--Often used as
pesticide or herbacide.
Organosulfur compounds
There are three major organosulfur compounds:
1. Compounds that contain the functional group in which
oxygen is replaced by sulfur. (Thiols, sulfides, disulfides,
thiourea –both N & S) i.e.1-napthylthiourea—a rodenticide.
2. Compounds that contain a functional group consisting of
sulfur and oxygen. (Sulfoxides, sulfones).
3. Sulfur heterocyclics: where sulfur is attached at one of the
points in a cyclic carbon molecule.
Examples of Organosulfur
compounds
Organophosphorus compounds
Phosphorus can occur in organic compounds in either a 3+
(PH3 –Phosphine) or 5+ (PH5 –Phosphane) oxidation state.
Organophosphorus compounds are also distinguished on the
basis of their P–C to P–O–C linkages.
Polymers: high-molecular-weight compounds that are
composed of a large number of simple repeating units called
monomers. The conversion process from monomer to polymer
is known as polymerization.
polyethylene terephthalate
http://blog.heritageenviro.com/Blog/?Tag=plastic%20recycling
http://www.speciation.net/News/Toxicantimony-species-found-in-beverages-storedin-PET-containers-;~/2006/08/16/2316.html
http://www.sustainableisgood.com/blog/2009/02/preserv
egimme5.html
http://earth911.com/recycling/construction/pvc/
http://green514.com/2008/03/29/polystyrene-6/
Figure 5-21. Examples of monomers used to build the common synthetic
polymers. See text for examples of the uses of each synthetic polymer.
Carbon Compounds in the Environment
Natural Sources of Carbon Compounds…
Humic Substances: a general category of naturally occurring, biogenic,
heterogeneous organic substances that can generally be characterized as
being yellow to black in color, of high molecular weight, and refractory.
•Humin: that fraction of the humic material that is insoluble in water at all
pH values.
•Humic acid: that fraction of the humic material that is soluble in water at
pH values greater than 2.
•Fulvic acid: that fraction of the humic material that is soluble in water at
all pH values.
•Humic and Fulvic acids are the major components of both freshwater
and marine DOC. (although there are significant differences in the types of
humic substances that occur in these 2 environments.)
Ta ble 5-4. Co mpositon of hu mic substances in various en viron ments
Soil
Ground
water
Surface
water
Lake
sedi ments
Sea
water
M arine
sedi ments
Aro matic
hydrocarbons
20 - 35%
-
17 - 3 0%
<15%
<15%
<15%
H/ C
0.5 - 1.0
0.7 - 1.2
0.7 - 1.1
1.0-1.6
1.6
1.0 - 1.5
M olecular
weights
10 3 - 10 6
500 - 10 4
<10 4
1 03 - 1 06
< 10 3
-
Soil Organic Matter
Soil: a complex system of air, water, decomposing organic
matter, living plants, and animals, in addition to the residues of
rock weathering, organized into definite structural patterns as
dictated by the environmental conditions.
http://esask.uregina.ca/entry/soils.html
http://www.extension.org/pages/33600/management-recommendations-for-soil-carbon-storage
Gelisols - soils with permafrost within 2m of the surface.
Histosols - organic soils.
Spodosols - acid forest soils w/ a subsurface accumulation of metal-humus complexes.
Andisols - soils formed in volcanic ash.
Oxisols - intensely weathered soils of tropical and subtropical environments.
Vertisols - clayey soils with high shrink/swell capacity.
Aridisols - CaCO3-containing soils of arid environments with subsurface horizon
development.
Ultisols - strongly leached soils with a subsurface zone of clay accumulation and
<35% base saturation.
Mollisols - grassland soils with high base status.
Alfisols - moderately leached soils with a subsurface zone of clay accumulation and
>35% base saturation.
Inceptisols - soils with weakly developed subsurface horizons.
Entisols - soils with little or no morphological development.
Marine Organic Matter
Marine and terrestrial sedimentary environments differ in a
number of important ways. Marine sediments have a greater
porosity and a narrower range (7-8 versus 4.0 – 8.5) of pH
than terrestrial sediments.
Different environments
contain different
organisms and as a
result have different
C/N ratios and d13C
values.
Coal: carbonaceous sediment composed most often of the
remains of spores, algae, fine plant debris and
noncarbonaceous ash.
Humic coals: derived from humic substances via a peat stage.
Sapropelic coals: formed from fairly fine-grained organic muds
in quiet, oxygen-deficient shallow waters.
Peat: Unconsolidated, semicarbonized plant remains
with high moisture content. Not true coal.
Lignite: (brown coal) coal with high moisture content and
commonly retain many of the structures of the original woody
plant fragments.
Bituminous: coals that are hard, black coals with a higher
carbon content than lignite and commonly display alternating
bright and dull bands.
Anthracite: hard, black, dense coal commonly containing more
than 90% carbon. Anthracite is hard and shiny and breaks with
conchoidal fracture.
Petroleum: any hydrocarbon-rich
fluid (liquid or gas) derived from
kerogen by increases in pressure
and temperature.
Kerogen: a polymeric organic
material that occurs in sedimentary
rocks in the form of finely
disseminated organic macerals—
the preserved remains of plant
material.
Diagenetic environment: the
environment in which processes
occur at pressures and
temperatures greater that those of
the weathering environment, but
below those required to produce
metamorphism.
Cracking: the process whereby complex organic molecules
such as kerogens or heavy hydrocarbons are broken down into
simpler molecules (e.g. light hydrocarbons) by the breaking of
carbon-carbon bonds in the precursors.
The rate of cracking and the
end products are strongly
dependent on the
temperature and presence
of any catalysts.
Sweet crude oil has a low sulfur content.
Sour crude oil has a high sulfur content.
Elemental Composition of Crude Oil
Element
Abundance (wt. %)
C
82.2 – 87.1
H
11.8 – 14.7
S
0.1 – 5.5
O
0.1- 4.5
N
0.1 – 4.5
Others
< 0.1
Why would the percentage of S and N be important?
Natural carbon inputs to surface and ground waters.
TOC is the total organic carbon and is composed of the DOC
and the POC.
DOC is dissolved organic carbon—can pass through a
0.45mm filter.
POC is particulate organic carbon—carbon particulate matter
retained by a 0.45mm filter.
Sources of carbon can either be allochthonous (from
outside the aquatic system) or autochthonous (from within
the aquatic system).
The concentrations of organic
carbon vary greatly with differing
aquatic systems, as does DOC /
POC.
In general:
Surface waters have higher TOC
than deep waters, because of
photosynthetic organisms.
Coastal waters have a higher TOC
than open ocean waters, because
of land inputs.
Groundwater has a low carbon
content, because organic carbon is
used as a food supply by
heterotrophic microbes.
Anthropogenic Carbon inputs to surface and ground waters
Organic carbon: Think waters overrun by septic systems…
If these effluents contain nutrients (N, K, P) which are often
limited in the natural environment, it can lead to eutrophication.
BOD: (biological oxygen demand) the capacity of the organic
matter in a sample of natural water to consume oxygen. The
BOD should be much lower than 8.7 mgO2/L (O2 saturation value
at 25°C).The median BOD for unpolluted waters in the United
States is 0.7 mgO2 / L
Pesticides: chemicals used to control the growth of unwanted
organisms.
Insecticides: a pesticide used to control insects.
Herbicide: a pesticide used to control plant growth.
Fungicide: a pesticide used to control the growth of various
types of fungus.
Hard pesticides: typically organochlorine compounds that are
persistent in the environment, but have low toxicity in
mammalian systems.
Soft pesticides: Typically organophosphorus compounds and
carbamates that have short residence times in the environment,
but are often highly toxic.
LD50: the amount of the chemical per unit of body mass required
to produce death in 50% of an exposed animal population.
Bioconcentration factor: (BCF) the expression of the tendency
of a particular organic chemical in water to concentrate in fatty
tissue.
log BCF = 0.935*log KOW – 1.495
Where KOW = [S]octanol / [S]water and
[S]octanol is the concentration of the chemical in the alcohol: 1octanol and [S]water is the concentration of the chemical in
water.
The higher the KOW value, the more strongly a chemical is
partitioned into the fatty tissue.
Chemicals with log KOW values of 7 to 8 or greater tend to be
strongly adsorbed to sediments and are unlikely to enter living
tissue.
Ta ble 5-9. Data for selected pestici des
Pesticide
Solub ility in
H 2O
(mg kg -1)
LD 5 0
( mg kg -1)
log K ow
log BCF
Hard
H CB
0.0 062
3,500 - 10,000
5.3
3.5
DDT
0.0 034
115
3.9 - 6.2
2.2 - 4.3
85
2.9 - 3.3
1.2 - 1.6
To xaphene
n /a
Dieldrin
0.2 0
46
5.1 - 6.2
3.3 - 4.3
M ire x
0.2 0
700
5.8
3.9
1.0
Soft
M alathion
145
1,37 5 - 2,800
2.7
Parathion
24
3.6 - 13
n/a
Atrazin e
30
1,87 0 - 3,080
2.3
0.7
Biomagnification: the bioaccumulation of a substance up the
food chain by transfer of residues of the substance in smaller
organisms that are food for larger organisms in the chain.
Recall that roughly 10%
of the biomass from the
lower trophic level is
transferred to the next
level, but ALL of the
pesticide is transferred.
Dioxins, PCBs, and Dibenzofurans (DFs)…Oh My!!!
Dioxin: the byproduct of pesticide manufacture and by the
incomplete combustion of PCBs during waste incineration.
They have high thermal stability and do not decompose until
the temperature exceeds 700°C. The basic structure is two
benzene rings connected by an oxygen-containing cyclic
hydrocarbon. The benzene rings have from one to eight
chlorine atoms substituting for hydrogen giving a total of 75
possible derivatives.
PCBs: (polychlorinated biphenyls) two benzene rings joined by
a single bond with attached chlorine atoms. PCBs have very
high chemical, thermal, and biological stability; low vapor
pressures; and high dielectric constants. For this reason they
have wide industrial applications. They accumulate in the
environment and subsequently in the fatty tissues of birds and
fish. They are ubiquitous.
Dibenzofurans: produced when PCBs are heated in the
presence of oxygen. Their structure is that of 2 benzene rings
joined by a furan ring (4 carbons and one oxygen joined in a
ring structure.) Furans with intermediate amounts of Cl have a
toxicity similar of that to TCDD—Dioxin.
The relative toxicity of these chemicals is measured using the
Toxicity Equivalence factors (TEQ). By multiplying the TEQ
specific to the dioxin, etc. one can determine the relative detrimental
health effects as equivalents to TCDD. FYI: The LD50 for TCDD in
hamsters is ~0.046mg/kg.
Example 5-4
Suppose that an individual ingested 20 pg of 2,3,7,8tetrachlorodibenzo-p-dioxin, 200 pg of octachlorordibenzo-pdioxin, and 40 pg of 1,2,3,4,7,8,9-heptachlorordibenzofuran. Using
the toxicity factors listed in table 5-10, determine the Toxicity
Equivalence Factor for the sum of these exposures.
Ta ble 5-10. Toxicity e quivalence factors ( TEQ) for so me important
dioxins and furans
Dio xin or furan
2,3,7,8-tetrachlorodibenzo -p-dio xin
1,2,3,7,8-pentachlorodibenzo -p-dio xin
TEQ
1
0.5
1,2,3,4,7,8-he xachlo rodib enzo-p-dio xin
0.1
1,2,3,7,8,9-he xachlo rodib enzo-p-dio xin
0.1
1,2,3,6,7,8-he xachlo rodib enzo-p-dio xin
0.1
1,2,3,4,6,7,8-heptachlorodiben zo-p-dio xin
0.01
octachlorodibenzo-p-d io xin
0.001
.
2,3,7,8-tetrachlorodibenzo furan
0.1
2,3,4,7,8-pentachlorodibenzo furan
0.5
1,2,3,7,8-pentachlorodibenzo furan
0.05
1,2,3,4,7,8-he xachlo rodib enzofuran
0.1
1,2,3,7,8,9-he xachlo rodib enzofuran
0.1
1,2,3,6,7,8-he xachlo rodib enzofuran
0.1
2,3,4,6,7,8-he xachlo rodib enzofuran
0.1
1,2,3,4,6,7,8-heptachlorodiben zofuran
0.01
1,2,3,4,7,8,9-heptachlorodiben zofuran
0.01
octachlorodibenzofuran
0.001
TEQ = (20pg)(1) + (200pg)(0.001) +
(40pg)(0.01) = 20.6pg of TCDD
PAHs (polycyclic aromatic hydrocarbons) consist of fused
benzene rings. The only PAH still commercially produced is
naphthalene, whose vapor is toxic to some insects. PAHs are
also produced by the incomplete combustion of wood and
coal. They are found in creosote, which is a wood
preservative. Certain PAHs are known carcinogens and tend
to accumulate in fatty tissues.
NAPLs (nonaqueous-phase liquids): hydrocarbons that
have very low solubility in water. They are divided into two
groups on the basis of their density.
LNAPLs are light nonaqueous-phase liquids and are less
dense than water. As a result, they will float on the water table.
LNAPLs are primarily petroleum and gasoline-related
compounds.
DNAPLs are dense nonaqueous-phase liquids and are more
dense than water. As a result, they can sink into the saturated
zone. DNAPLs are mostly halogenated hydrocarbons and
commonly occur as contaiminaants in groundwater.
DNAPLs
LNAPLs
Volatilization: the tendency to readily go into the vapor state.
Most organic compounds have a low volatility –they do not
readily evaporate. However, low-molecular-weight, nonpolar
molecules have the greatest vapor pressures of organic
compounds. ---Think nail polish remover or gasoline---.
The partitioning of an organic compound between liquid and
vapor is often expressed in terms of a Henry’s Law’s constant.
Hi = Concentration in vapor state / Concentration in water.
Degradation Half-life: the length of time it takes for 50% of
an organic compound to be degraded.
t½ = ln2 / k where k is the degradation (rate) constant for the
compound.
Air Stripper used for VOCs
http://www.daienv.com/soilandgroundwaterremediation.html
http://www.induscoenviro.com/strippers.htm
This concludes our review of Organic “Carbon” Chemistry. The
following problems from Chapter 5 are due November 2
Chapter 5 #s: 5, 6, 7, 9, 14, 20, 26, 41, 50, 56
http://www.chemistrydaily.com/chemistry/Cartoon