Transcript Presentation

Creating Opportunity for Power Saving
Power Saved is Power Produced
Current situation – power supply & demand
Power
Generation
Consumption
• Increased Population
• Living Standards
• Industrialization
Consumption
Power
Generation
• Save Energy
• Use TRINIC Products
Unique advantages of trinic
TRINIC ELECTRONIC PVT LIMITED
Best
practices
Processes
Certifications
Quality
Standards
• Professionally managed Private
Limited Company
• Promoted by Mr. S.V. Ramana
Rao, Managing Director.
• Situated
at
Hyderabad,
Telangana.
• Stringent processes,
Proven
Best Practices, Certifications,
Well-established QMS are the
unique attributes of Trinic.
• Trinic
Electronic
Ballasts,
Lighting Products developed
with stringent processes and
quality standards ensure 40% to
45% in domestic and 25% to
30% in street light applications
of energy savings – for domestic
and industrial use.
A lamp glow - without electronic ballast
Factors that contribute for a bulb’s ‘glow’
Initial
Voltage
Power
Factor
Load
Reactance
Stable Voltage
Environment
Manufacturing
Quality
A lamp glow - with TRINIC electronic ballast
The key Advantages with TRINIC Ballast:
• Instant start no need of starter
• No impact on audio / video
• Noise generation is zero
• It is a repairable product
• It is a completely indigenous product
• A normal tube can be used on our
electronic ballast
High
Frequency
(start)
Optimized
Power
Factor
Less
Vulnerable to
Fluctuations
Reduced
Heat
Long
Life
Less Power
Consumption
A comparison – conventional vs TRINIC vs other reputed brands
Conventional (Copper Choke)
Operates at 185V-250V
Starter required to glow tube
Current Consumption: 380mA
Total Power Consumption: 50W
The Power factor is very Low @ 0.5,
additional Capacitor banks are required to
improve Power Factor to avoid penalties from
the Electricity Board
One year guarantee is usually given on a
conventional copper choke
No Returns on Investment
Copper Chokes are heavy therefore a heavy
fitting has to be used to accommodate the
weight
Conventional fittings are Power Consuming
Devices and these expenses are recurring in
nature
Humming Noise is generated because of
Electro Magnetic Cores and the noise
increases with the ageing of choke
Trinic Electronic Blast
Operates at 90V - 300V
Starter is not required
Current Consumption: 130mA
Total Power Consumption: 28W
Other Reputed Brands
Operates at 135 V - 250V
Starter is not required
Current Consumption: 160mA
Total Power Consumption: 36W
The Power Factor is maintained @ >= 0.95 hence, capacitor banks can be avoided
The Power Factor is maintained @ 0.9, - hence, capacitor
banks can be avoided
4 years replaceable gurantee is being given on
Trinic Electronic Ballast
The investment on Trinic Electronic Choke can
be recovered quickly
1 year Service Guarantee is being given on Eletronic Light
Fitting
The investment on Electronic Choke can be recovered
over span of time
A sleek fitting is enough since the weight of
ballast is just 180 grams
The weight of Electronic Choke is also less when comared
with the conventional
Substantial savings, and are of recurring in
nature. Around 45% savings
Recurring savings, and are of around 25% only
No noise is present
No noise is present
Advantages of trinic electronic blasts
Advantages of TRINIC Electronic Blasts
No major infrastructural changes are required
Easy to Install
Trinic Blasts ensure constant Power Factor of > 0.9
Wide range of Operating Voltage: 90V to 300V
Maintained crest factor is below 1.6 – hence, lamp life
increases
Ballasts are repairable
Pay-back guaranteed within warranty period
Replacement is guaranteed for 3 years against any defect
Life of the Ballast is 8 to 10 years
No metal – hence easy to install without any machinery
Thank you