Transcript Floor plan

Drafting 2 (Arch)
Quiz Review #3
Quiz Review
Quiz Review #3
1. Dashed lines that follow the counters in a kitchen floor
plan most likely represent:
A dishwasher
Upper (wall hung) cabinets
A trash compactor
A valance
Quiz Review #3
1. Dashed lines that follow the counters in a kitchen floor
plan most likely represent:
A dishwasher
Upper (wall hung) cabinets
A trash compactor
A valance
Quiz Review #3
2. What BEST describes the split-wired duplex receptacle
outlet symbol?
Circle with one line
Circle with two lines
Circle with two lines and one side shaded
Circle with one line and one line shaded
Quiz Review #3
2. What BEST describes the split-wired duplex receptacle
outlet symbol?
Circle with one line
Circle with two lines
Circle with two lines and one side shaded
Circle with one line and one line shaded
Quiz Review #3
3. Which plan would include illustrations for distribution
panel, meter, and lighting outlets?
Floor plan
Elevation plan
Electrical plan
Circuit plan
Quiz Review #3
3. Which plan would include illustrations for distribution
panel, meter, and lighting outlets?
Floor plan
Elevation plan
Electrical plan
Circuit plan
Quiz Review #3
4. How much voltage is required to operate a dishwasher?
60 volts
100 volts
120 volts
240 volts
Quiz Review #3
4. How much voltage is required to operate a dishwasher?
60 volts
100 volts
120 volts
240 volts
Quiz Review #3
5. A duplex convenience outlet should be located on any
wall longer than:
1’ – 0”
2’ – 0”
4’ – 0”
5’ – 0”
Quiz Review #3
5. A duplex convenience outlet should be located on any
wall longer than:
1’ – 0”
2’ – 0”
4’ – 0”
5’ – 0”
Quiz Review #3
6. What is the most logical place for a 3-way switch?
Bathroom
Hall
Closet
Office
Quiz Review #3
6. What is the most logical place for a 3-way switch?
Bathroom
Hall
Closet
Office
Quiz Review #3
7. How many switches are required for a stairway
between main levels of a home?
Two three-way switches
Two single-pole switches
Three single-pole switches
One three-way switch
Quiz Review #3
7. How many switches are required for a stairway
between main levels of a home?
Two three-way switches
Two single-pole switches
Three single-pole switches
One three-way switch
Quiz Review #3
8. Where are weatherproof outlets usually installed?
Bathroom
Bedroom
Kitchen
Exterior of a home
Quiz Review #3
8. Where are weatherproof outlets usually installed?
Bathroom
Bedroom
Kitchen
Exterior of a home
Quiz Review #3
9. Which type of outlet should be installed in bathrooms
and other wet areas?
Duplex convenience
Ground Fault Interrupt
Special Purpose
Weather Resistant
Quiz Review #3
9. Which type of outlet should be installed in bathrooms
and other wet areas?
Duplex convenience
Ground Fault Interrupt
Special Purpose
Weather Resistant
Quiz Review #3
10. Which statement best describes the placement of
symbols on an electrical fixture plan?
Layer color should be blue
Total circuit load must be noted
Approximate locations are used
Locations are dimensioned
Quiz Review #3
10. Which statement best describes the placement of
symbols on an electrical fixture plan?
Layer color should be blue
Total circuit load must be noted
Approximate locations are used
Locations are dimensioned
Quiz Review #3
11. To create a clear electrical plan, on which plan should
electrical symbols be placed?
Framing plan
Floor plan with dimensions
Floor plan without dimensions
Elevation plan
Quiz Review #3
11. To create a clear electrical plan, on which plan should
electrical symbols be placed?
Framing plan
Floor plan with dimensions
Floor plan without dimensions
Elevation plan
Quiz Review #3
12. How many feet apart should outlets be spaced for
small appliances in the kitchen?
2’
4’
6’
8’
Quiz Review #3
12. How many feet apart should outlets be spaced for
small appliances in the kitchen?
2’
4’
6’
8’
Quiz Review #3
13. What voltage rating is needed for a refrigerator
outlet?
60 volts
100 volts
120 volts
240 volts
Quiz Review #3
13. What voltage rating is needed for a refrigerator
outlet?
60 volts
100 volts
120 volts
240 volts
Quiz Review #3
14. What is the recommended distance for the service
conductors to run inside the house before they reach the
main disconnect switch?
10’ – 0”
12’ – 0”
20’ – 0”
22’ – 0”
Quiz Review #3
14. What is the recommended distance for the service
conductors to run inside the house before they reach the
main disconnect switch?
10’ – 0”
12’ – 0”
20’ – 0”
22’ – 0”
Quiz Review #3
15. What is the purpose of a legend on an Electrical Plan?
Show HVAC placement
Specify wire sizes
Define edges of work space
Explain symbols
Quiz Review #3
15. What is the purpose of a legend on an Electrical Plan?
Show HVAC placement
Specify wire sizes
Define edges of work space
Explain symbols
Quiz Review #3
16. Where should switches that operate a closet light be
located?
Inside the closet
Near the night stand
In the hallway
Outside the closet
Quiz Review #3
16. Where should switches that operate a closet light be
located?
Inside the closet
Near the night stand
In the hallway
Outside the closet
Quiz Review #3
17. What voltage is required by a clothes dryer?
60 volts
120 volts
220 volts
300 volts
Quiz Review #3
17. What voltage is required by a clothes dryer?
60 volts
120 volts
220 volts
300 volts
Quiz Review #3
18. What area of the home would usually NOT require
three-way switches?
Garage
Bathroom
Hall
Stairs
Quiz Review #3
18. What area of the home would usually NOT require
three-way switches?
Garage
Bathroom
Hall
Stairs
Quiz Review #3
19. Where should the switch for the main source of light
for a room be located?
Latch side of the entrance door
Hinged side of the entrance door
Either side of the entrance door
Minimum of five feet from the door
Quiz Review #3
19. Where should the switch for the main source of light
for a room be located?
Latch side of the entrance door
Hinged side of the entrance door
Either side of the entrance door
Minimum of five feet from the door
Quiz Review #3
20. Which appliance is MOST likely to require an
independent (220volt) circuit?
Clothes Washer
Fan
Range
Dishwasher
Quiz Review #3
20. Which appliance is MOST likely to require an
independent (220volt) circuit?
Clothes Washer
Fan
Range
Dishwasher
Quiz Review #3
21. A sectional drawing of a building is a/an:
Elevation
Site plan
Floor plan
Schedule
Quiz Review #3
21. A sectional drawing of a building is a/an:
Elevation
Site plan
Floor plan
Schedule
Quiz Review #3
22. The "scale" selected to create a drawing depends
upon:
The available paper size
The size of the overall structure
The architect’s preference
The size of the structure and plot size
Quiz Review #3
22. The "scale" selected to create a drawing depends
upon:
The available paper size
The size of the overall structure
The architect’s preference
The size of the structure and plot size
Quiz Review #3
23. What is the purpose of annotation on a drawing?
Clarify what a symbol represents
Identify where the material symbol is produced
Identify the draftsman designing the symbols on
drawings
Identify dimensions that are needed to size the floor
plan symbols
Quiz Review #3
23. What is the purpose of annotation on a drawing?
Clarify what a symbol represents
Identify where the material symbol is produced
Identify the draftsman designing the symbols on
drawings
Identify dimensions that are needed to size the floor
plan symbols
Quiz Review #3
24. How are ceiling joists often noted on a floor plan?
A line with arrowheads indicating direction
Hidden lines
A framing chart reference symbol
A series of equally spaced, parallel lines
Quiz Review #3
24. How are ceiling joists often noted on a floor plan?
A line with arrowheads indicating direction
Hidden lines
A framing chart reference symbol
A series of equally spaced, parallel lines
Quiz Review #3
25. Which statement is correct concerning floor plan
drawings?
Dimension lines are broken, and the number placed inside
the break
Dimension lines are read only from the bottom of the
page (unidirectional dimensioning)
Dimension chains should be added and compared against
the overall dimension
Room names are not given
Quiz Review #3
25. Which statement is correct concerning floor plan
drawings?
Dimension lines are broken, and the number placed inside
the break
Dimension lines are read only from the bottom of the
page (unidirectional dimensioning)
Dimension chains should be added and compared
against the overall dimension
Room names are not given
Quiz Review #3
26. The outer dimension lines on a floor plan should
dimension:
The building offsets
Center lines of vents
The door and window locations
The overall width and depth of the structure
Quiz Review #3
26. The outer dimension lines on a floor plan should
dimension:
The building offsets
Center lines of vents
The door and window locations
The overall width and depth of the structure
Quiz Review #3
27. What is the most popular scale for residential floor
plan drawings?
1/8” = 1’-0”
¼” = 1’-0”
½” = 1’-0”
1” = 1’-0”
Quiz Review #3
27. What is the most popular scale for residential floor
plan drawings?
1/8” = 1’-0”
¼” = 1’-0”
½” = 1’-0”
1” = 1’-0”
Quiz Review #3
28. What is the accepted method of writing a
measurement of "six-inches" on an architectural drawing?
6”
0’-6”
½’
.5’
Quiz Review #3
28. What is the accepted method of writing a
measurement of "six-inches" on an architectural drawing?
6”
0’-6”
½’
.5’
Quiz Review #3
29. Which of the following statements is TRUE concerning
a floor plan drawing?
All dimensions are written so that they can be read from
the bottom of the page
Dimensions are written so that they can be read from the
bottom and right side of the page
Dimensions under four feet are converted to inches. For
example, a two foot distance would be written as 24”
Dimensions are placed so that they can be read from the
bottom and left side of the page
Quiz Review #3
29. Which of the following statements is TRUE concerning
a floor plan drawing?
All dimensions are written so that they can be read from
the bottom of the page
Dimensions are written so that they can be read from
the bottom and right side of the page
Dimensions under four feet are converted to inches. For
example, a two foot distance would be written as 24”
Dimensions are placed so that they can be read from the
bottom and left side of the page
Quiz Review #3
30. Where are overall building dimensions placed?
Inside other dimensions
On all four sides of a floor plan
Outside the other dimensions
Closest to the building
Quiz Review #3
30. Where are overall building dimensions placed?
Inside other dimensions
On all four sides of a floor plan
Outside the other dimensions
Closest to the building
Quiz Review #3
31. When dimensioning architectural plans, which is the
symbol for a "foot" measurement?
‘
“
Ft.
*
Quiz Review #3
31. When dimensioning architectural plans, which is the
symbol for a "foot" measurement?
‘
“
Ft.
*
Quiz Review #3
32. Which of the following would be located on an
architect's scale?
¼” – 1’-0”
1” – 20-0”
1cm = 10mm
1/16” – 1’-0”
Quiz Review #3
32. Which of the following would be located on an
architect's scale?
¼” – 1’-0”
1” – 20-0”
1cm = 10mm
1/16” – 1’-0”
Quiz Review #3
33. What is the dimensioning system most commonly
used in architectural drafting?
Architectural dimensioning
Aligned dimensioned
Construction dimensioning
Unidirectional dimensioning
Quiz Review #3
33. What is the dimensioning system most commonly
used in architectural drafting?
Architectural dimensioning
Aligned dimensioned
Construction dimensioning
Unidirectional dimensioning
Quiz Review #3
34. Which of the definitions below defines piers?
Horizontal members used to support the ends of floor
joists
Horizontal members used to support walls
Vertical members used to support floor systems
Vertical members used to support roof structures
Quiz Review #3
34. Which of the definitions below defines piers?
Horizontal members used to support the ends of floor
joists
Horizontal members used to support walls
Vertical members used to support floor systems
Vertical members used to support roof structures
Quiz Review #3
35. What is the masonry vertical post used to support the
floor systems known as?
Lally column
Lintel
Pier
Wall stud
Quiz Review #3
35. What is the masonry vertical post used to support the
floor systems known as?
Lally column
Lintel
Pier
Wall stud
Quiz Review #3
36. Which of the definitions below defines live loads?
Fixed or moving weights that are not a part of the
structure
Framing materials both vertical and horizontal types
Fixed weights that are part of the structure
Weights of more that 500 lbs/sq.ft.
Quiz Review #3
36. Which of the definitions below defines live loads?
Fixed or moving weights that are not a part of the
structure
Framing materials both vertical and horizontal types
Fixed weights that are part of the structure
Weights of more that 500 lbs/sq.ft.
Quiz Review #3
37. Which of the definitions below defines "Drain tile"?
Black plastic with holes on half of its circumference
Red clay put together with short spaces between the
sections
Black cast iron put together with bells
White PVC with no holes or spaces
Quiz Review #3
37. Which of the definitions below defines "Drain tile"?
Black plastic with holes on half of its circumference
Red clay put together with short spaces between the
sections
Black cast iron put together with bells
White PVC with no holes or spaces