Transcript 1.abstract - Hi Projects

XBee based Garbage pits monitoring
system with information updating to
the department
Student Name
Guide Name
USN NO
H.O.D Name
Name Of The College & Dept
CONTENTS
1.
Abstract
2.
Objectives
3.
Block diagram
4.
Methodology
5.
Advantages & disadvantages
6.
Applications
7.
Conclusion
1.ABSTRACT:
In this system, a new sewage flow remote monitoring system over
XBee is presented, which monitors the pits monitoring remotely in real time.
In the proposed system, XBee network is adopted as the wireless sensor
network, and the data between the slave computer and the remote terminal are
transmitted via the XBee . The system is easy to implement and has a high
degree of automation, by which the acquisition, transmission and processing of
the pits overflow data can be achieved in wireless, networked and intelligent
manners.
2.OBJECTIVES:
The objective of the project is to monitor the environment by pits
overflow and send the information to the department.
3.BLOCK DIAGRAM:
RECEIVER:
4. METHODOLOGY:
This proposed work is attempts to design XBee based Garbage
pits monitoring system with information updating to the department. This
system contains single-board embedded system that is equipped with XBee
along with ARM processor. During object motion, its location can be
reported by SMS message. The use of XBee technologies allows the system
to track overflow location.
The IR transmitter transmits the IR signals continuously ,IR receiver
receives continuously if any garbage pits fill then the community of IR TX &
IR RX signal then it gives the signal to the ARM , then the ARM will send the
information via XBee which read from XBee in Municipality office . At the
same time ARM will generate the output that is fed to buffer IC 4050, buffer
stores and given to the driver IC 2003 in driver current will amplifies and
voltage will inverts with the help of Darlington circuit of driver IC to drive the
relay. Then signal is given to the output load for indication purpose.
5. ADVANTAGES & DISADVANTAGES:
ADVANTAGES:
1.
Prevent pollution and promote reuse and recycling
2.
Reduce priority and toxic chemicals in products and waste; and
3.
Conserve energy and materials
DISADVANTAGES:
In this project usage of relays leads to consume more power.
6.APPLICATIONS:
1.
Hydraulic and water quality monitoring of water transmission and
distribution systems (this also includes capturing fast pressure
transient events).
2.
Remote acoustic leak detection including remote cross-correlation.
3.
Monitoring the water level in sewer collectors and combined sewer
outflows.
7.CONCLUSION:
We achieved our objective without any hurdles i.e. to protect the
environment clean and tidy.
THANK YOU