Smart Zone Sensing With Auto Breaking System Using

Download Report

Transcript Smart Zone Sensing With Auto Breaking System Using

Smart Zone Sensing With Auto
Breaking System Using ARM
Student Name
USN NO
Guide Name
Name Of The College & Dept
H.O.D Name
CONTENTS
1.
Abstract
2.
Objectives
3.
Block diagram
4.
Methodology
5.
Advantages & disadvantages
6.
Applications
7.
Conclusion
1.ABSTRACT:
The goal of the proposed
system is to protect the environment and
surrounding from the hazardous conditions of the vehicles. The system is
mainly performing the work of smart zone sensing and auto breaking. This
system is performed using automation with the help of RF technology.
2.OBJECTIVES:
1.
Effective in implementation.
2.
Low power consumption, and compact size.
3.
High reliability, due to the usage of power semiconductor devices.
4.
Greater control range due the usage of Frequency Modulation with a
PC.
5.
Vehicles monitored from a remote area (no need of 'line-of-sight’
arrangement).
3.BLOCK DIAGRAM :
BUFFER
DRIVER
RELAY & VPS
OUTPUT DEVICES
BUZZER
RF TX SCHOOL
ZONE
DC MOTOR
M
INTERFACING
RF RECEIVER
VISUAL
INDICATION
STAGE
ARM PROCESSOR
VARIABLE
VOLTAGE
REGULATOR
LCD DISPLAY
RF TX HOSPITAL
ZONE
+12 Volts
+5 Volts
GND
230 V, AC
Supply
TRANSFORMER
RECTIFIER
FILTER
REGULATOR
4. METHODOLOGY:
A general block diagram of the proposed scheme is given in Figure
. In the Module there is Vibration & poisonous gas Detector, when the
vibration or & poisonous gas is detected the it gives the signal to the MSP
430 controller, then the controller will generate the output that is fed to
buffer IC 4050 ,buffer stores and given to the driver IC 2003 in driver
current will amplifies and voltage will inverts with the help of Darlington
pair circuit of driver IC to drive the relay . Then signal is given to the
output load buzzer for indication purpose .
5. ADVANTAGES & DISADVANTAGES:
ADVANTAGES:
1.
More useful in remote areas.
2.
Firing events more help full to save.
3.
This project we can operate Easily
4.
Can be used globally.
DISADVANTAGES:
1.
Under the mine the personal safety of staff problem.
2.
Personnel positioning problem
6.APPLICATIONS:
1.Can be adequately implemented in national defense
through
military-industrial partnership.
2.Can be vastly applied in Resorts, borders of noted buildings.
3.Installation of combat robots in the stadiums, sacred places,
government and non government organizations assures top
security.
7.CONCLUSION;
This System has been successfully designed and tested. It has been mainly
designed in order to avoid accidents and to alert the drivers about the speed
limits for safe traveling. Many existing systems has discussed about the
road safety’s and has proposed many methods for the speed limitations and
accident detections. Controlling the vehicle speed automatically in real time
is very difficult. So, in order to avoid that difficulties, instead of controlling
the vehicle speed automatically, our project succeeded in alerting the driver
about the speed limits and detecting accidents.
THANK YOU