Transcript Document

INVERTER
PO-1500 SERIES 4
LOCATED IN PORT SIDE NOSE COMPARTMENT
PROVIDES 115V AC SINGLE PHASE, 400HZ IN CASE
OF FAILURE OF BOTH ALTERNATORS
EQUIPMENT FAILS DUE TO
FAN COVER DAMAGE
FAILURE OF BEARING
MALFUNCTIONING OF CENTRIFUGAL S/W
RESISTORS OUT OF ADJUSTMENT
FAILURE WILL CAUSE NON AVAILABILITY OF
EMERGENCY BUS BAR (115V)
INVERTER PO-1500 SERIES 4
EQUIPMENT ELECTRO-MECHANICAL AND
ROTARY IN NATURE. REQUIRED TO BE
REPLACED WITH SOLID STATE STATIC VERSION,
DESIGN CLEARANCE FROM CEMILAC
THE REQUIREMENT FOR FIVE YEARS IS 150
T
E
C
C
H
N
I
C
A
L
S
P
E
C
I
F
I
C
A
T
I
O
N
S
- INPUT VOLTAGE – 27V DC±2.7V
- INPUT CURRENT – 104 AMPS
- OUTPUT VOLTAGE 115V AC±3.5V
SINGLE PHASE, SINE WAVE
- AC LOAD CURRENT – 13 AMPS
OUTPUT FREQUENCY – 388 TO 420 HZ
- OUTPUT POWER – 1500VA
- EFFICIENCY – 48% MINIMUM
- POWER FACTOR – 0.9 (INDUCTIVE)
- OPERATING TEMPERATURE - ±60°C
- ALTITUDE – 15,000 METER FOR CONTINUOUS
OPERATION AT RATED LOAD, 1800 METER AT
75% LOAD
- WEIGHT – 25.2 KG
-SHOULD HAVE REMOTE ON/OFF AND OVERLOAD
PROTECTION BY CIRCUIT BREAKER
BACK TO LIST