Transcript TMDE PROGRAM

TMDE PROGRAM
TMDE PROGRAM
NSWC Det Seal Beach
ACTION ITEM UPDATE &
STATUS
Steve Cluer
562-626-7578
[email protected]
TMDE PROGRAM
Action Item Update Summary
• DMM & Probe Alignment
• Antenna Analyzer (S115BQ)
• EMI Test Equipment Requirements
TMDE PROGRAM
DMM & V/I Probes Alignment
• Option 1
– Stand Alone DMMs
• SCATS 4237, 4249, 4212 (Partial), & 4195 (Partial)
– Stand Alone Voltage Probes (Only)
• SCAT 4242
– Stand Alone Current Probes (Only)
• SCAT 4236
TMDE PROGRAM
DMM & V/I Probes Alignment
• Separate DMM & Probes
– Stand Alone Probes Useable With Any Typical DMM
(Handheld or Benchtop)
– Probes SCAT 4242 & 4236 Typically Called Out
Separately
– DMM Typically Called Out as Standalone without Probes
– High Probe Population in Inventory is Standalone
– Permits DMM SCAT Code Combination Under Single
Standard Model (NAVSEA Spec in process at NRL)
TMDE PROGRAM
DMM & V/I Probes Alignment
• Option 2 (Combine Meters & Probes)
– Combine DMM with Voltage Probes
• SCATS 4237, 4242
– Combine DMM with Current Probes
• SCAT 4236 & 4249
TMDE PROGRAM
DMM & V/I Probes Alignment
• Combined Meters & Probes
– Increased Cost
• (Unit Price Increased due to Divided Buy Population
• Multiple Model Life Cycle Support Required
– Replacement of either DMM or Probe will Require
Purchase of both
– MRC Decks will Require Updates
– Requires Replacement of High Percentage of Current
Inventory to Achieve Configuration Control
TMDE PROGRAM
DMM & V/I Probes Alignment
• Option 3 (Standalone Clamp I Meter)
– Combine DMM with Voltage Probes
• SCATS 4237, 4242
– Standalone Clamp on V/I DMM
• SCAT 4236
– Standalone DMM
• SCAT 4249
TMDE PROGRAM
DMM & V/I Probes Alignment
• Standalone I Meter
– Increased Cost
• (Unit Price Increased due to Divided Buy Population
• Multiple Model Life Cycle Support Required
– Replacement of either DMM or Probe will Require
Purchase of both (Voltage Only)
– MRC Decks will Require Updates (Voltage Only)
– Requires Replacement of High Percentage of Current
Inventory to Achieve Configuration Control
TMDE PROGRAM
Antenna Analyzer (S115BQ)
•
•
•
•
•
Field Evaluation Complete (USS John Young)
Draft Evaluation Report (Mark McHugh)
Report Review by CWP & TMDE Program
CWP Project Conclusion & Implementation
Options Under Consideration:
– Separate Analyzer from Adapters (Cost Savings)
– Spectrum Analyzer and Power Measurement Option
(support for EMI community)
TMDE PROGRAM
EMI GPETE Requirements
• EMI Measurements Requirements Review for O & I Level
(NAVSEA 053)
• O Level Requirements Issues:
– Combine Antenna Analyzer & Spectrum Analyzer
– Delete Filter Requirements
– Combine Radiation Hazard Meter with Spectrum Analyzer
• I Level Requirements Issues:
– Standalone Antenna Analyzer
– Standalone Broadband Spectrum Analyzer Required
– Filters Required
• Project Conclusion & Implementation (NAVSEA 053)