Transcript - Glenair

Glenair Military and Industrial
Power and Signal Connectors
Series ITS (And FRITS) 5015 Type
Reverse Bayonet Connectors
 Derived from MIL-DTL-5015 and
VG95234
 Mating mechanism (3 reverse bayonets at
120°) derived from VG95234
 With and without (ITB) steel stud on the
receptacle
 Several options available: platings, insert
materials, contacts, backshell
terminations, etc.
 FRITS version for Mass Transit Market
uses fire resistant inserts.
Series ITS Exploded View: Straight
Plug and Box Mount Receptacle
Box mount
receptacle
Receptacle
Insert
Crimp Contacts
Grommet
Compression ring
Internal O-Ring
Backshell
Straight plug
Front O-Ring
Shell
Insert
Crimp Contacts
Coupling nut
Grommet
Compression ring
Internal O-Ring
Backshell
Sleeve
Cable clamp
ITS Connector Series and Backshells
ITS Series Platings ROHS Compliance
Series ITS Specifications








Size 20, 18, 16, 12, 8, 4, 0, 4/0 crimp contacts.
Over 200 insert arrangements.
Available 8 AWG coaxial contacts
Aluminum alloy with cadmium-free surface
coatings.
-55° C to +125° C continuous temperature
rating
Chemical and moisture resistant synthetic rubber
inserts
7.5 to 350 AMPS depending on contact selection.
Operating voltage by service ratings:





A: 250 VDC
D: 700 VDC
E: 1250 VDC
B: 2450 VDC
C: 4200 VDC
Series FRITS - STR
STR backshells lock the cables or wires
inside the connector, assuring IP67
environmental rating.
 Possible to use different cable gages with
each connector size.
 Termination of multiscreened cables is
accomplished by locking the braids between
sectors.
 Availability of different terminations for
PG or Metric cable glands, rubber conduits,
etc.
Series IT 5015 Type
Threaded Coupling Connectors

Threaded connector derived from MILDTL-5015 and VG95234

Insert arrangemements: from MIL-DTL5015, 1 to 150 contacts
Contact current rating: 7.5A to 350A
Silver or gold plated crimp and solder
contacts






Applications: Automatic machines,
brushless motors, welders, encoders,
agricultural machines, trains
Intermateable with certain competitor
products
Keyed polarization
Broad range of accessory fittings
Series ITH Rigid Insert Power and
Signal Connectors
 Easy-to Assemble 5015
type connector with fifteen
insert arrangements with
size 8, 12, 16 and 20
contacts
 Conforms to VG95234,
NFF 6103 and BS 6853
 Low fire hazard plastic
insert, gold plated copper
contacts
 Offers rapid assembly and
better electrical insulation
Series ITH :
Exploded view of plug and receptacle connector
INSERT WITH
W,X,Y,Z
POLARIZATION
KEYS
Metallic Clip
Removable Insert
ITZ Connectors
 Another connector
derived form 5015, with
insert arrangements from
1 to 150 contacts
 Fast mating trapezoidal
thread mating
 5 connector sizes
 Current rating: 7.5A to
350A
IPT Connectors







Derived from MIL-C-26482-Series I
and VG95328
Insert arrangements with 2 to 61
contacts and 7 contact sizes
Current rating: 7.5A to 13A
Intermateable with MIL-C-26482
Series I and VG95328
Compatibility as well to BS9522
F0017
Specials or custom designs available
Various classes available
IPT Connector Exploded View
Wall mount
receptacle
Shell
Contacts' insert
Contacts
Coupling nut
Grommet
Compression ring
Backshell
Cable clamp
Straight plug
Internal O-Ring
Receptacle
Contacts' insert
Contacts
Grommet
Compression ring
Backshell
Series 900 Power Connectors
 Very robust heavy duty connector
 Used in harsh environmental applications in
Mass Transit
 Withstands high vibration and shock while
mantaining an excellent watertight seal
 Coupling nut and backshell can be rubber
covered
 Crimp type contacts for high current as well
as coax, triax, twinax
 Current rating: 200-400A
 Working Voltage: 900-2000 Vac
 IP 67 when mated or protected with
required sealing components
Series 900 Power Connectors
Medium to low voltage rail
connectors used in car-to-car
connections

 Current rating: 400A Max
 IP68 environmental rating
 Stainless Steel receptacle
protective flop lid
 Rubber coated shells conform
to fire resistance standards
IRT Series Power Connectors
High Power Rectangular Series
Used to Connect:
1.
Bogey (Truck) Frame
2.
Engine-Frame
3.
Freight Car Power
IRT Series Power Connectors
3 pole power connector with size 4/0 solder contacts
- Conductive front side (for continuity when the connector
is mated)
- Terminals for joint of friction pipes 3530 according to
UNI4883 standard.
TECHNICAL CHARACTERISTICS:
- Contacts section: 3 x 70 mm²
- Working current: 350 A max
- Working voltage: 3000 Vac
- Test voltage: 8000 Vac
- Working temperature: (from -25 to +70)°C
- Coupling force: < 200 N
- Environmental rating (mated connector): IP67
Series IGE: Single Pole Power
Connectors
 Single pole connectors
used for transmission
of high currents with
low voltage, as, for
example, on military
vehicles or industrial
equipment.
 Reverse bayonet
coupling
 5 connector sizes
 Current Rating: 225A
to 950A
VG96929 (IGE) Connectors
SHELLS
Material:
Aluminum alloy per QQP
416 Type II Class C
Plating:
Olive drab over cadmium
INSERTS
Material:
PTFE ( Teflon)
CONTACTS
Contact identification: Z for Pins
F for Sockets
Material:
Copper Alloy
Plating:
Silver
Supported Cable Sizes:
Size 16
H2= 25mm²
Size 18
H5= 50mm²
Size 22
H9= 90mm²
Size 28
H15=150mm²
Size 32
H24= 240mm²
VG96929 (IGE) Connectors
Box mount receptacle
Receptacle
Rear O-ring
Front insert
Threaded pin contact
Rear insert
VG96929 (IGE) Connectors
Straight plug
Coupling nut
Front O-ring
Shell
Front insert
Crimp socket contact
Rear insert
VG96929 (IGE) Connectors
CURRENT RATING AT 125°C
Shell size
Contact size
Max.Current
16 18
22
H2 H5 H9
225 350 570
24
H15
750
32
H24
950
Max. short-time load (approx. 0,5-1 sec)
750 1K 2K
3K
5K
VOLTAGE
Test Voltage: 1050 Vac
Working Voltage: 350 Vac Max. according to MIL-STD-1344
UniPower Connectors

Single pole power connectors
 Color coded poloarization
 Current rating: 245A
 Working voltage: 1500 Vde
 UL94-V0 plastic body with
silver plated contacts
UniPower Connectors








UniPower provides safe and reliable
connections in power distribution
systems.
Available in four formats (Panel Drain,
Panel Source, Line Drain, Line
Source).
Includes three phases (L1-L2-L3), earth
(G) and neutral (N). Typically used for
applications in motors, generators,
power distribution boxes.
Current rating: 600A max
Plastic bodies are fire resistant and high
impact resistant
Watertightness in mated condition
Mechanically and color coded
Daisy chain available
UniPower Technical Characteristics

CABLE SECTION : UNIPOWER 400 (Standard) : 120mm² Max
UNIPOWER 800 (Standard) : 300mm² Max

MAX CURRENT : UNIPOWER 400 : 400A @ < 70° C

MAX CURRENT : UNIPOWER 800 : 800A @ < 70° C

MAX EARTH VOLTAGE : 2Kv AC - 3Kv DC

MIN FLASHOVER : 9.5Kv AC/DC (peak)

OPERATING TEMPERATURE : -30° +125° C

INSULATING RESISTANCE : > 50 MOhm @ 500 VDC

ENVIRONMENTAL PROTECTION : up to IP67 (coupled connector)

EL. ANTISHOCK PROTECTION : IP2X
FLAME RESISTANCE

HEAT/FLAME RESISTANCE : EN60309-I/BS550.7.5.4

MECHANICAL STRENGTH : EN60309-I/BS550.7.5.4
UniPower Contacts
HIGH CONDUCTIVE CONTACT,
NUT & SPRING WASHER (for PANEL DRAIN)
HIGH CONDUCTIVITY
MULTIPOINT CONTACT
FINGER TOUCH
INSULATING TIP
HEX SET SCREW
COMPRESSION SLEEVE
(for LINE SOURCE AND LINE DRAIN)
CB Connectors: Miniature Audio
Connectors for Military Applications




Miniatueized bayonet connector
with spring loaded, self-cleaning
contacts
7 and 10 poles according to VG
95351 and VG 96934
Glenair product to be qualified
Used on the telecommunication
units, especially mobile, to
connect:
1. Microphones
2. Headphones
3. Auxiliary equipment like
adapters, amplifiers , sensors
CB Connectors: Performance
MAIN CHARACTERISTICS






Resistance to extreme
environmental conditions
Waterproof in the unmated
condition
High reliability at low current and
voltage
Antimagnetic properties
High protection against EMI-RFI
Gold plated, copper contacts with
solder type or dip-solder
terminations
Ruggedized Power and Signal Connectors for
Military, Industrial, Entertainment, Telecom
and Rail Applications
Industrial /
Commercial
Rail
Telecom
Entertainment
Military