Transcript Presentazione di PowerPoint

New hydraulic 24V barriers: B680H
Summary
 Why a 24V hydraulic barrier?
 Barriers future scenario
 USPs
 Technical specifications
Why a 24V hydraulic barrier?

 Extend the Hybrid technology (Hydraulics + 24V) to the barriers:
consolidation of FAAC technological leadership in the automation
market
 Get the maximum performance united to the maximum safety: very
high opening speed, full reliability and obstacle detection
New FAAC 24V hydraulic barriers: B680H
Summary
 Why a 24V hydraulic barrier?
 Barriers future scenario
 USPs
 Technical specifications
Barriers future scenario
Performances (freq. use, beam length, speed)
640
620
615
}
}
New barriers B680H from 2m to 8m in length
Restyled, will be kept as the entry level hydraulic
barrier (residential application)
Summary
 Why a 24V hydraulic barrier?
 Barriers future scenario
 USPs
 Technical specifications
USPs (Unique Selling Points)
1
Hydraulic technology
8
Modular beams up to 8m
2
DC brushless motor
9
Very high speed (adjustable)
3
Removable case
10
Single version for left and right
4
“Unlimited duration” springs
11
Body and Beam Lights
5
Integrated encoder
6
Integrated control board
7
High sensibility integrated loop detectors
1 Advantages of hydraulic technology
Duration and reliability: up to 4 times higher than an electromechanical
operator. In a hydraulic operator all the components are in oil bath,
therefore less subjected to wear.
Thrust force: a thrust up to 2 times higher than an equivalent
electromechanical operator can be generated in a very small space.
Resistance: very suitable for harsh environments (humidity, sand, salt, etc.)
High operating frequency: the continuous lubrication of the components
makes hydraulic operators suitable for heavy duty applications.
Maintenance: limited and cheaper with respect to a electromechanical
operator.
Operating noise: the oil guarantees a very low operating noise.
In the medium term, the cost of an hydraulic operator is compatible
with an electromechanical operator
2 24V DC brushless motor
Maintenance free and precise control
The 36V DC brushless gives an optimal control in any position
 Flexible acceleration and deceleration
 Adjustable opening/closing time
 Long lifetime
 No thermal issues
 Motor in oil bath
Hyraulic pump unit with
DC brushless motor
1+2 Hybrid Technology
High reliability in any application
The
technology, core of the B680H
barriers, combines both the advantages
of a 24V DC motor with hydraulic
technology.
On one hand, the 24V motor allows a
continuous duty, making these barriers
suitable also for high traffic applications
(e.g. toll ways, parking lots, etc.).
On the other hand, the hydraulic
technology and the use of high quality
components make the B680H very
reliable and durable products.
24V
+
Hydraulics
=
3 Removable case
Self supporting structure and removable case
The barrier has a strong centerpiece
bearing the load, while the removable
external case acts as a cover: in this
way it is easy and cheap to change an
eventually damaged case, without
affecting the barrier structure.
The external case, treated with Epoxy
Zinc Primer 100um, is available in four
different colors (RED RAL 3020, BLUE
RAL 5011, Light GREY RAL 9006, WHITE
RAL 9010) and in stainless steel version.
The foundation plate is compatible with
the 620/640 one so old barriers can be
easily replaced by B680H.
Foundation plate
compatibility with 620/640
4 “Unlimited duration” springs
Maintenance free
The two springs of the B680H are designed
to have an expected life longer than the
entire barrier life expectancy: more than
2.000.000 cycles.
Springs never need to be changed
5 Integrated encoder
Maximal accuracy and respect of the safety standards
The integrated encoder allows to
perfectly control the beam in any
position. In addition, it ensures a high
accuracy in obstacle detection and
inversion quickness, according to the
current European safety standards:
B680H can be used to control pedestrian
accesses
The encoder is mounted directly on the
shaft for a more precise control of the
beam.
Absolute
Encoder
6 Integrated control board E680
High flexibility and programmability
High energy efficiency switching power supply
with extended voltage range (90V – 240VAC).
Control board E680 integrated in the upper
rear part of the barrier in a transparent case
to avoid crashes and humidity and to allow
easy installation or maintenance.
The board is conceived as the evolution of the
624BLD, therefore it keeps the same flexibility
and number of logics of its predecessor.
Moreover, the board is compatible with a great
number of interfaces, i.e. 2Easy Bus, G-COM,
NET-COM, WI-COM.
On the side of the FAAC XBAT 24 batteries
could take place.
X-Bat24
Control
Board
7 High sensibility integrated loop detectors
Top performance 2-channels integrated loop detectors
The 2 channels integrated loop detectors are totally
renewed in SW and HW.
High sensibility: they can even recognize a bicycle.
Total compatibility: they work well even with loops
not specifically designed as by instructions (i.e.
preexisting loops).
Automatic setup and calibration: there is no need
for selecting the frequency or other parameters but
sensibility level; a sophisticated algorithm execute
an automatic calibration setting the best resonating
setup possible for the loops connected. Installer
has only to chose the level of sensibility requested
by the application.
The achieved performances are better than the
commercial loop detectors ones taken as
benchmark (Bircher Reglomat ProLoop 2)
2 Loop
detectors
8 Modular beams up to 8m net in length
Modular Beams: suitable for a wide range of applications
4m
4m
+
Invisible joint
(once mounted)
B680H
5m
B680H
 Wide range of applications: B680H can mount beams from 2m up to
8,3m in length.
 Simplified logistic: beam longer than 4m can be achieved combining
two pieces of different length through an easy-to-mount joint.
Example: 4,3m base + 4m extension = 8,3m beam
9 Adjustable speed
FEW versions for MANY applications
In the B680H the beam speed can be adjusted through the electronic
control board. This implies that there’s no more need for many
versions (STD, R, TT, etc.) because the barriers can be configured to
suit very different applications.
Speed:
2m  <1,5 sec.
8m  <6 sec.
10 Single version for left and right
Logistic complexity reduced
The B680H can be mounted in as a left or
right version, depending on the
application, by simply removing the spring
and fixing it on the correct side.
In this way, the logistic complexity is
considerably reduced and the stock
management can be optimized.
Right
version
Left
version
11 Body and Beam lights
Perfect visibility in every environmental conditions
Integrated Semaphoric
Flashing Lamp (rosso/verde)
LED strip
Environmental conditions can hardly affect the visibility of the beam
(at night, with fog, etc.), therefore B680H provides:
1.
LED strip, that runs along the beam signaling its presence
2.
Flashing bicolor (red – green) LEDs lamp, not protruding and
integrated in the body, designed to be vandal resistant.
Significantly reducing of ordering codes
+
+
Aste S intere o modulari (2 spezzoni)
con giunto fino a 5m
Aste L intere o modulari (2 spezzoni)
con giunto fino a 8m
Summary
 Why a 24V hydraulic barrier?
 Barriers future scenario
 USPs
 Technical specifications
Technical specifications B680H
FAAC B680H
Input voltage
90÷240 Vac 50 (60) Hz
Power supply type
Extended range switching power supply
Electric motor
Brushless 36Vdc
Absorbed Power
240 W
Electronic slowdown
Absolute Encoder
Anticrushing device
Absolute Encoder (inversion on obstacle)
Beam type
Round or elliptic profile with rubber and LED light prevision
Max length of beam
Modular beam from 2 m up to 8,350 m (net passage 8m)
Opening time
Adjustable: from 1.5s for 2m beam up to less than 6s for 8m beam
Electronic control board
E680: Integrated, placed at the upper side, easily programmable by
display, two high sensibility integrated loop detectors, integrated
Master-Slave management, slowdown management, BUS 2EASY, 4
programmable outputs, Led strip on the beam and semaphoric flashing
lamp management
External case treatment
Epoxy Zinc Primer 100 microns
Ambient working temperature
and IP rate
IP 44; -20+55°C
Weight
85Kg (65Kg supporting structure+ 20Kg case)
Dimensions (L x P x H) in mm
469x279x1100
B680H dimensions