Transcript Call to Action

Introducing….
nCLASS
Click Image to download intro flyer
nCLASS Control Packages
What is nCLASS?
• A series of preconfigured nLight control packages
designed to be easily specified along side pendant (e.g.
Peerless) or recessed (e.g. Lithonia) classroom lighting
packages.
• Packages are explained and illustrated in detail through a
series of design worksheets.
• The worksheets also provide step-by-step instructions that
simplify ordering.
nCLASSA-2
nCLASSA-3
nCLASSB-2
nCLASSB-3
nCLASSC-2
nCLASSC-3
nCLASSD-2
nCLASSD-3
nCLASS Control Packages – Features
Specifier Friendly…
• Simple to follow worksheets make design quick and consistent
• Easily matched with pendant or recessed lighting packages
• Seamless integration into a building or campus-wide nLight-enabled
lighting control network
Contractor Friendly…
• Each room’s devices ship bundled together making job site logistics
easy
• All wall stations are low voltage, no line voltage wires below the ceiling
• All devices interconnect via standard CAT-5 networking cables
• No sensor sensitivity adjustments required
• Plug’n’Play… all functionality is preconfigured… power up and walk
away
User Friendly…
• Intuitive wall controls require less wall space than other solutions
• Not limited to factory configuration, operation can be modified
without tools once installed
nCLASS Control Worksheet – Page 1 (e.g. nCLASSA-3)
nCLASS Control Worksheet – Page 1 cont. (e.g. nCLASSA-3)
Example Riser Diagram
nCLASS Control Worksheet – Page 1 (e.g. nCLASSD-3)
nCLASS Control Worksheet – Page 1 cont. (e.g. nCLASSD-3)
nCLASS Control Worksheet – Page 2 (e.g. nCLASSA-3)
Package Number
(nCLASSA)
• Each step of ordering options
requires a selection
• After making choice from the 6 steps,
a fully defined classroom controls
package is specified
• Orderable package model number is
created
• Worksheets can also be used to
collect specifications for a projects
not requiring “pre-configured “kit”
approach
Model Number
Structure
Step 1: Indicate Lighting to be controlled (choose 1)
Step 2: Indicate Teacher Control Station Option (choose 1)
Step 3: Indicate Entrance Station Requirement (choose 1)
Step 4: Choose Occupancy Sensor Coverage (choose 1)
Step 5: Include Preterminated CAT5 Cable Bundle
Step 6: Choose Color of Wall Stations (choose 1)
© 2013 Sensor Switch