Transcript Document

CheckMeter 2.1
Portable Working Standard
Page 1
March 2009
Applications
CheckMeter 2.1 integrates today’s requirements of a
Portable Working Standard for testing electricity meters
and meter installations:
Size & Dimensions
 rigid design
 light in weight

Accuracy
 Class 0.2%


Functions
 Meter testing
 1-phase measurement
 Current measurement
 Voltage measurement
 Energy measurement
Documentation
 Data memory
 Transfer to Windows©
Software CALSOFT I

Page 2
March 2009
Advantages
 Precision test equipment for AC values in the 45 Hz to 66 Hz
frequency range
 LCD display ¼ VGA (240 x 320 Pixels) with graphical user
interface
 Wide measuring range with auto ranging
 Display of vector diagram for analysis of mains conditions and
meter connections
 Measurements of wave forms and harmonics with display
 Easy detection of circuit connection faults
 Data memory for test results and customer data
 Small dimensions and light in weight
 Serial interface (RS 232) for data transfer
Page 3
March 2009
Functions
 Active, reactive and apparent energy measurement with
integrated error calculator
 Impulse output for energy (galvanic isolation)
 Registration of active, reactive and apparent energy for
register testing
 Active, reactive and apparent power measurements
 Current and voltage measurements
 Phase angle measurement
 Power factor measurement
 Frequency measurement
Page 4
March 2009
Technical data
Basic Characteristics
 10 ... 300 V
Auxiliary supply from
measurement circuit
 Clamp-on CT 10 mA ... 100 A
 Measurements of:
voltage, current, active,
reactive and apparent
power, energy, frequency,
power factor, error
measurement
 Accuracy  0.2 %
Options:
 CALSOFT I Software
Page 5
March 2009
Connections
Top and bottom view CheckMeter 2.1
[1]
[2]
[3]
[4]
[5]
[6]
Phase connection
Neutral connection N
Connection for CT
Pulse input / output
Supply voltage connection
RS 232 serial line interface
Page 6
March 2009
Connections
Front view CheckMeter 2.1
[7]
[8]
[9]
[10]
[11]
[12]
LCD display
Menu card keys
Cursor keys
Enter key
Start/Stop Impulses
Alphanumeric keypad
Page 7
March 2009
Current clamps to
the CheckMeter 2.1
 Error compensated clamp-on CT
for measurements in the range
10 mA … 120 A, cable diameter
max. 10 mm
 Clamp-on CT for measurements in
the range 10 mA … 120 A, cable
diameter max. 52 mm
Page 8
March 2009
Operation Concept
Symbols

Display

Control Keys

Page 9
March 2009
Operation Concept
Status Indication
Page 10
March 2009
Operation Concept
Main Menu
Meter Testing 
Measurement of load values 
Vector diagram 
Energy measurement 
Basic settings 
Page 11
March 2009
Operation Concept
Meter Testing
Page 12
March 2009
Operation Concept
Measurement of Load Values
Page 13
March 2009
Operation Concept
Harmonics Analysis, Waveform Display, Vector Diagram
Page 14
March 2009
Operation Concept
Energy Measurement
Page 15
March 2009
Operation Concept
Administrative data set (ADS)
Page 16
March 2009
Operation Concept
Examples of test results
Page 17
March 2009
Connection example
Testing of a direct connected meter up to 100 A
Page 18
March 2009
Connection example
Testing of transformer operated meter
Page 19
March 2009
Windows©-Software
CALSOFT
Selection of real
time readout
or
readout of sets of
data from memory
of CheckMeter 2.1
Page 20
March 2009