Transcript JWPF Connector

LEB Connector
To introduce the new LEB board-to-board and wire-to-board, crimp style connector series.
LEB Connector
Ideally suited for LED light bar applications, where a board-to-board and wire-to-board connector that is sub-miniature
in size and offers engineers design flexibility is required. The low profile of the connector does not interfere with the
luminescence angle of the pcb mounted LEDs.
The LEB Series board-to-board and wire-to-board, crimp-style connector is on a 4.0mm (.157”) pitch, and is molded in a
RoHS compliant 94V0 9T Nylon(SMT headers) resin. The LEB Series incorporates both polarization and friction lock
features.
Rated at 3A AC/DC (using 22 AWG) at 300VAC, these low profile connectors have a side-entry, mated height of only
2.65mm (.104”). The series has an operating temperature range of -55 to +105 C including temperature rise when
applying an electrical current. The series is offered in a 1 and 2 circuit sizes.
LEB Connector
crimp style wire-to-board contact
The LEB Series contact, is designed to accommodate a wire range of 22AWG to 26AWG and is made of tin-plated,
copper alloy base material. The tab construction ensures stable contact performance, redundant contact points, positive
electrical contact and low contact resistance at all times even when subjected to vibration and distortion.
The suggested wire strip length is 1.7mm. Crimp heights vary by wire size. Consult JST for crimp height measurements.
LEB Connector
crimp style wire-to-board housing
Molded in a 94V-0 rated, glass filled PBT resin, the polarized LEB Series housings
incorporate a friction locking feature preventing accidental disconnection due to routing of
wires or vibration. Available in 1 and 2 circuits. The friction lock provides an audible click
and is felt when mating the housing assembly with the mating header. The housings are
notched on one side for ease of locating the pin 1 position.
LEB Connector
SMT headers
Side-entry
Available in side-entry (right angle) only mounting configuration, the RoHS compliant, fully shrouded
headers are 94V-0 rated and feature insertion guides for easy and secure insertion of the mating LEB
housings. The copper alloy posts are reflow treated tin-plating over copper-underplating and are designed
to prevent accidental removal of the pins that might result from distorted mating. Copper alloy, tin-plated
reinforcement tabs offer strength and stability to the mounted headers. The SMT headers are packaged in
embossed tape for automated placement equipment.
THE LEB SERIES IS ENGINEERING
& MANUFACTURING FREINDLY
Bench press and applicator
Industry standard applicator
Hand tools
The LEB Series contact applicators are for semi-automatic and fully automatic termination equipment normally found in
the manufacturing environment as well as standard hand tools. Standard reels (15,000 pieces) are used with semiautomatic and fully automatic assembly equipment are available for manufacturing. For prototyping and light
production needs, hand tools are available.
THE LEB SERIES SUMMARY
The LEB board-to-board and wire-to-board connectors are a low profile, compact
connector system:
• Compact size and pitch
• Reliable contact construction ideal for low current, low voltage conditions
• Available in 1 and 2 positions
• Applicable AWG #22 to 26
• Secure, friction locking
• RoHS compliant SMT product
• Supported with termination tooling for manufacturing requirements.