Transcript Slide 1

Application & Control method for
62000B Series DC Power Supply
Applications
Control method for paralleled. (Type A)
Control with CSU
Front Panel Control
APG
CAN or Ethernet
PC
CAN Bus
Output
Parallel
Output
CAN Bus
Output
DUT
Control method for paralleled. (Type B)
Control without CSU
CAN BUS
PC
Output
Parallel
Output
CAN Bus
Output
DUT
Control method for paralleled. (Type C)
Control without CSU or PC
In Local or Manual programming configurations:
1. You can NOT adjust the output voltage when in parallel.
2. In parallel configurations the output voltage is fixed to the factory default settings.
3. Local adjustment of output voltage is possible only in stand alone.
Remote ON/OFF signal => DRY CONTACT
<Closed = enabled; Open = disable>
PS: Time delay from output enable until output stable: 3s max.
Output
Parallel
Output
Output
DUT