Transcript Powertech UPSC Substation Capabilities - Powertech

Powertech UPSC Substation Capabilities
B-tech
•
Developed Battery monitoring system which monitors Substation Batteries
•
The prime objective of this system is to identify faulty batteries and have them
removed.
•
The system consists of an S5(brains and comms), BVM software Battery
Validation Manager (analyzing software) and connections to each of the
batteries in the line-up
•
Major advantage of this system is the ability to extract impedance information
from the cell
•
Once this information is extracted it is sent to the BVM software for trending
B-tech
• Rising Impedance tells us that the cell is failing
•Trending the impedance can tell us when the cell will fail
•Cells with high impedance will not deliver the rated capacity
•Voltage can remain stable and mask defective cells
•All of this information is available via B-techs BVM software
which can be communicated to via Ethernet, modem or serial
connection. Modbus and DNP protocols are available.
•BVM software is easy to use, intuitive and Quickly identifies
suspect batteries
EMSPEC
EMSPEC
•
research, develop and manufacture some of the highest quality, highest end
switching equipment in the world, including high, medium and low voltage
grounding switches, vertical breaks, center breaks, double side breaks, single
side breaks, reversing switches, tilt types, telescopic types, semi-pantograph
types, knee types and a complete range of manual and motor operators.
•
EMSPEC machines all of their parts, no parts are casted. Casting cannot
produce a consistant part with equal electrical and physical properties.
Machining the switch parts produces a safe, easily maintainable, reliable
switch.
•
EMSPEC produces a modular motor operator which is safe reliable and easy to
install and maintain. It allows easy interface to SCADA systems via multiple
communication paths
EMSPEC
Square D
•
Manufactures monitoring equipment for substations. Square D has a full
line of products with a full range of capabilities.
•
Excel in communications from the monitor to the RTU/Scada System
– Ethernet/Serial/Modem
– Multiple Protocols(DNP, Modbus, Ion, protocol interpreter
•
Software is available which compliments the hardware
– Ion Enterprise (Scada, realtme software)
– EEM (PQ software)
•
Technology available to calibrate high voltage CTs and Pts
Product Portfolio
Features
ANSI C12.20
Web-enabled
EN50160
Loss compensation
Class A Metering
Advanced Control
Transient detection
Sag/Swell detection
High Speed Metering
Direct Ethernet Access
Revenue Accuracy
Status Monitoring
Digital Comms
Waveform Capture
Automatic Alarming & Control
Trend Logging
Energy Pulsing
Real-time Power & Energy
$
Current and Potential Calibration
Power Design
•
Modular Enclosures
•
•
•
These units are customizable to any size and any design
Can add electric, cable trays, venting, insulation.
User can assemble themselves in the substation
Tech Products
•
1, 3 and 6 Inch Tags, Customizable Tags
Powertech-UPSC
•
Offer Technical Support/Advise
•
Offer Distribution and Stocking options out of Farmington Ct.
•
Offer splices and connectors for a full range of applications
•
Offer cable cleaners and cable prep kits and cable lubricants
Inside Sales Contacts
Chris Halm (860) 678 8772 [email protected]
Lisa Langdon (860) 678 8772 [email protected]