Transcript Access Control

Access Control
( Hardware )
June 25, 2010
Created by Castaly / Andy Chen
Access Control
•
•
•
•
•
•
•
•
Guideline
Introduction
GV-Reader Series
GV-Controller Series
Accessories
Advance Section
Summary
FAQ
• Guideline for Access Control
Access Control
Introduction
AS-H
Introduction
• What is access control?
– Access Control is any
mechanism by which a system
grants or revokes the right to
access some data, or perform
some action. Normally, a user
must first login to a system,
using some Authentication
system. Next, the Access
Control mechanism controls
what operations the user may
or may not make by comparing
the UserID to an Access
Control database.
Introduction
• In order to install an Access
Control System, you will
need the hardware items
below.
– GV-Controller
– GV-Readers / GV-GF
Fingerprint Reader
Access Control
System Structure
AS-H01
• System Structure for
Access Control
Access Control
GV-Reader Series
AS-H02
What’s Reader?
• Data Reader
• A input device
• A combination of readers or
tags
What’s Reader?
• GV-Reader Series Products
– GV-Reader 1251
– GV-Reader 1352 V2
– GV-GF1900
– GV-GF1901
– GV-GF1902
– GV-AS100
What’s Reader?
• GV-Reader 1251
– Support Wiegand 26 / RS485
Interface
– Frequency: 125KHz
– Type of Card: E
– Card / Tag distance: 4 cm / 3 cm
– Temperature: -20 ~ 65 C
What’s Reader?
• GV-Reader 1352V2
– Support Wiegand 26 / RS485
Interface
– Frequency: 13.56MHz
– Type of Card: M / F
– Card / Tag distance: 5 cm / 4 cm
– Temperature: -20 ~ 65 C
What’s Reader?
GV-Reader
1251
GV-Reader
1352V2
Wiegand 26 /
RS-485
Wiegand 26 /
RS-485
125 KHz
13.56 MHz
Card / Tag Type
E
M/F
Distance
between
Card & Reader
4 / 3 (cm)
5 / 4 (cm)
-20 ~ 65°C /
-4 ~ 149°F
-20 ~ 65°C /
-4 ~ 149°F
Communication
Frequency
Temperature
What’s Reader?
• GV-GF Enrolled Installation
What’s Reader?
• GV-GF1900
– Wigand 26
– Frequency: 13.56MHz
– Type of GV-Card: F
– Temperature: 0 ~ 65 C
– Sensing Area: 12 mm x 16 mm
– Sensor: Capacitive
– No output
– Operate Mode: Card + Finger
What’s Reader?
• GV-GF1901
– Wigand 26 / RS485
– Frequency: 13.56MHz
– Type of GV-Card: F
– Temperature: 0 ~ 65 C
– Sensing Area: 13.2 mm x 18.5
mm
– Sensor: Capacitive
– Support 1 output ( 240V, 2.5A )
– 1900 Fingerprints
– Operate Mode: Card + Finger
or Finger Only mode
What’s Reader?
• GV-GF1902
– Wigand 26 / RS485
– Frequency: 13.56MHz
– Type of GV-Card: F
– Temperature: 0 ~ 65 C
– Sensing Area: 17 mm x 20 mm
– Sensor: Optical
– Support 1 output ( 240V, 2.5A )
– 1900 Fingerprints
– Operate Mode: Card + Finger
or Finger Only mode
What’s Reader?
GV-GF1900
GV-GF1901
GV-GF1902
Communication
Wiegand 26
Wiegand 26
RS-485
Wiegand 26
RS-485
Frequency
13.56 MHz
13.56 MHz
13.56 MHz
F
F
F
0 ~ 65°C / 32 ~ 149°F
0 ~ 65°C / 32 ~ 149°F
0 ~ 65°C / 32 ~ 149°F
Finger 感應介面
電容式
電容式
光學式
Finger 感應面積
12x16(mm)
12x16(mm)
17x20(mm)
None
1 Port (240V/2.5A)
1 Port (240V/2.5A)
Card + Finger Mode
Finger only Mode
Card + Finger Mode
Finger only Mode
Card + Finger Mode
Card / Tag Type
Temperature
I / O 介面
產
品
差
異 Support Mode
優點
1. 感應速度快
2. 不受光線干擾
1. 感應速度快
2. 不受光線干擾
1. 指紋偵測面積較大
2. 無手汗症&乾手症感
應不良的狀況
1. 對於手汗症&乾手
缺點
症感應較差
2. 無 RS-485 介面
3. 無 output 輸出
1. 對於手汗症&乾手症感
應較差
1. 光線干擾問題
2. 感應速度較慢
Access Control
GV-Controller Series
AS-H03
Access Control
•
•
•
•
GV-AS200 Controller
GV-AS400 Controller
GV-AS100 Controller
GV-ASBox
GV-AS200
• GV-AS200 Controller
GV-AS200
• GV-AS200 Controller
– Two to four doors controller
– Support 4 Wiegand card reader
26~40 bits
– Support up to 8 card readers via
RS485
– 4 Inputs / 3 outputs for each door
• Inputs: Sensor, Button, Fire, Tamper
• Outputs: Alarm, Door, Urgent
GV-AS200
• GV-AS200 Controller
– What if there is a
disconnection between GVAS200 controller and GVASManager, can GV-AS200
controller still be operated?
• 65536 event buffer
• 10000 access card information
– What happens to GV-AS200
controller if connection is back?
GV-AS200
• GV-AS200 Controller
– Not support GV-GFV1901, GVGFV1902 RS485 interface
– GV-GF can ONLY use Wiegand
interface
– Connect to ASManager via RS485
or TCP/IP
• RS485 must connect to GV-Hub,
GV-Com or GV-Net I/O card v3.1
– Connect Card Reader to AS200
Controller via Wiegand or RS485
GV-AS400
• GV-AS400 Controller
GV-AS400
• GV-AS400 Controller
– A four doors controller
– Support 8 Wiegand card reader
26~64 bits
– Support up to 8 GV-Readers /
GV-GF via RS485
– 16 Inputs / 16 outputs
• Max voltage / current difference
between 1~8 outputs and 9~16
outputs
GV-AS400
• GV-AS400 Controller
– Connect up to 4 GV-I/O box
• GV-IOBox 4,8,16
• Max 80 inputs / 80 outputs
– GV-Reader / GV-GF can connect
up to 8 via RS485 connection
• Only compatible with
GeoFinger1901/1902
– Not support Security mode
GV-AS400
• GV-AS400 Controller
– What does it mean when ” low
battery” error message shows up
in GV-ASKeypad?
• AS400 remains 10 hours after the
battery stops working.
GV-AS100
• GV-AS100
GV-AS100
• GV-AS100
– One door controller
– Support 1 Wiegand interface
( 26~64 bits )
– 65536 event buffer
– Support 1000 Card information
– 3 inputs and 2 outputs
– No support tag
GV-AS100
• GV-AS100
– Program Mode
*227 Access the card manager
function
*276 Access Security Mode
*347 Display system information
*738 Access Parameter Setting
*737 Restores GV-AS100 to
factory default
GV-AS100
• GV-AS100
– Program Mode
*837 Test numeral keys to see if
they can be displayed properly
* Used to cancel the selection or
go back to previous page
0 Used to go to the next page
# Used to save the data that
was modified or programmed
in the system and quit.
GV-AS100
GV-ASBox
• GV-AS100 With GV-ASBox
– Support Doors  1 door to 2
doors
– The card information  1000 to
40000
– The internet connection 
RS485 to TCP/IP
– I/O  3 IN / 2 Out to 11 IN / 10
Out
GV-AS100
GV-ASBox
• GV-AS100 With GV-ASBox
– Wigand interface  2 in total
– RS485 interface  1 in total
– GV-GF  4 in total ( ASBox )
GV-AS100
GV-ASBox
• GV-AS100 With GV-ASBox
– Web Setting Switch
• When this switch is on, you
can modify advance setting of
GV-AS100 through the web
interface. When the switch is
off, advance setting are not
accessible.
– Briefly went through web
interface of GV-AS100 with
GVAS- box. ( Very similar to
AS400 )
Access Control
Accessories
AS-H04
Accessories
• GV-Keypad
• GV-Battery
GV-Keypad
• GV-Keypad
– Load default in AS200 and
ASBox
– Upgrade Firmware
– Setting Parameter, such as ID,
local time
– Display System information,
such as memory status, IP
address, firmware
version…etc
GV-Battery
• GV-Battery
– Act as UPS
– 4 hours max Life span
– Can be used in GV-AS200
Controller and other GeoVision
device.
– Recommended third party
battery
• Yuasa NPH 5-12
• GP1245 ( CSB )
GV-Battery
• GV-Battery
– Minimum Requirement for the
third-party battery
• Voltage 12v with suggested 5A
• Must have Terminal for Power
cable connection
• The size of Battery
approximately around the below
– Length 3.54”
– Width 2.75”
– Height 3.93”
Access Control
Advance
Section – Demo
AS-H05
Advance
Section - Demo
1) How to connect GV-Reader via
RS-485?
2) How to connect GV-Reader via
Wiegand?
3) How to setup I/O in GV-AS 200
controller?
4) How to setup I/O in GV-AS400
controller?
5) How to setup I/O in GV-AS100 with
ASBox controller?
6) How to add / delete a card in GVAS100?
6) How to enable / disable a card in
GV-AS100?
7) How to restore Factory Default in
GV-AS100?
Access Control
Summary
AS-H06
Summary
• Review All different
Hardware’s features
Summary
• Review All different
Hardware’s features
Access Control
FAQ