Internet routing

Download Report

Transcript Internet routing

1
ROUTING ON THE
INTERNET
5-Apr-17
CSE 6590
Performance Criteria
2



used for selection of route
simplest is “minimum hop”
can be generalized as “least cost”
Example Packet Switched Network
3
Autonomous Systems (AS)
4



is a group of routers and networks managed by
single organization
which exchange information via a common routing
protocol
form a connected network
 at
least one path between any pair of nodes
 except in times of failure
Interior and Exterior Router Protocols
5

interior router protocol (IRP)
passes routing information between routers within AS
 can be tailored to specific applications
 needs detailed model of network to function


may have more than one AS in internet



routing algorithms & tables may differ between them
routers need info on networks outside own AS
use an exterior router protocol (ERP) for this

supports summary information on AS reachability
Application of IRP and ERP
6
R1, R5: gateways
Interior Routing Approaches
7

Distance vector

Bellman-Ford
 Routing


Information Protocol (RIP)
Interior Gateway Routing Protocol (IGRP, Cisco
proprietary)
Link state
OSPF (Open Shortest Path First)
 OLSR protocol for MANETs

Distance Vector Routing
8


each node (router or host) exchange information with
neighboring nodes
first generation routing algorithm for ARPANET



Bellman-Ford algorihtm
requires transmission of lots of info by routers


eg. used by Routing Information Protocol (RIP)
distance vector and estimated path costs
changes take long time to propagate
Link State Routing
9





designed to overcome drawbacks of distance-vector
each router determines link cost on each interface
advertises set of link costs to all other routers in topology
if link costs change, router advertises new values
each router constructs topology of entire configuration




can calculate shortest path to each dest
use to construct routing table with first hop to each dest
do not use distributed routing algorithm, but any suitable alg to
determine shortest paths, eg. Dijkstra's algorithm
Open Shortest Path First (OSPF) is a link-state protocol
Open Shortest Path First
(RFC 2328)
10



interior routing protocol of the Internet
replaced Routing Information Protocol (RIP)
uses link state routing algorithm
each router keeps list of state of local links to network
 transmits update state info
 little traffic as messages are small and not sent often



uses least cost based on user cost metric
topology stored as directed graph
vertices or nodes (router, transit or stub network)
 edges (between routers or router to network)

11
Example
OSPF AS
12
Directed
Graph of AS
13
SPF Tree
for Router 6
14
Exterior Routing
15


link-state and distance-vector not effective for
exterior routing protocols
distance-vector
assumes routers share common distance metric
 but different ASs may have different priorities & needs
 but have no info on AS’s visited along route


link-state
different ASs may use different metrics and have different
restrictions
 flooding of link state information to all routers
unmanageable

Path Vector for Exterior Routing
16

alternative path-vector routing protocol
provides info about which networks can be reached by a
given router and ASs crossed to get there
 does not include distance or cost estimate
 hence dispenses with concept of routing metrics



have list of all ASs visited on a route
enables router to perform policy routing
eg. avoid path to avoid transiting particular AS
 eg. link speed, capacity, tendency to become congested, and
overall quality of operation, security
 eg. minimizing number of transit ASs

Border Gateway Protocol (BGP)
17




developed for use with TCP/IP model
is preferred exterior routing protocol of the Internet
uses messages sent over TCP connections
current version is BGP-4 (RFC 1771, RFC 4271)
BGP Functional Procedures
18

neighbor acquisition: agree to exchange routing info regularly


neighbor reachability: to maintain relationship


send OPEN messages to each otehr over a TCP connection. Reply
with a KEEP-ALIVE message.
periodically issue KEEP-ALIVE messages to each other
network reachability: to update database of routes

each router maintains a database of the networks that it can reach
and the preferred route for reaching each network. When a change
is made to this database, the router issues an UPDATE message that
is broadcast to all other routers implementing BGP.
BGP Routing Information Exchange
19




within AS a router builds topology picture using an
interior routing protocol
router issues UPDATE messages to other routers
outside AS using BGP
these routers exchange info with other routers in
other ASs
routers must then decide best routes for exterior
routing
BGP-4 Messages
20
Reference
21

Data and Computer Communications, William
Stallings, 9th edition, section 19.2
Least Cost Algorithms
22

basis for routing decisions
can minimize hop with each link cost 1
 or have link value inversely proportional to capacity


defines cost of path between two nodes as sum of
costs of links traversed
in network of nodes connected by bi-directional links
 where each link has a cost in each direction


for each pair of nodes, find path with least cost


link costs in different directions may be different
alternatives: Dijkstra or Bellman-Ford algorithms
Dijkstra’s Algorithm
23



finds shortest paths from given source node s to all
other nodes
by developing paths in order of increasing path
length
algorithm runs in stages (next slide)
 each

time adding node with next shortest path
algorithm terminates when all nodes processed by
algorithm (in set T)
Dijkstra’s Algorithm Method
24

Step 1 [Initialization]




Step 2 [Get Next Node]




T = {s} Set of nodes so far incorporated
L(n) = w(s, n) for n ≠ s
initial path costs to neighboring nodes are simply link costs
find neighboring node not in T with least-cost path from s
incorporate node into T
also incorporate the edge that is incident on that node and a node in T
that contributes to the path
Step 3 [Update Least-Cost Paths]


L(n) = min[L(n), L(x) + w(x, n)] for all n  T
f latter term is minimum, path from s to n is path from s to x concatenated
with edge from x to n
Dijkstra’s Algorithm Example
25
Dijkstra’s Algorithm Example
Iter
T
L(2)
Path
L(3)
Path
L(4)
Path
L(5)
Path
L(6
)
Path
1
{1}
2
1–2
5
1-3
1
1–4

-

-
2
{1,4}
2
1–2
4
1-4-3
1
1–4
2
1-4–5

-
3
{1, 2, 4}
2
1–2
4
1-4-3
1
1–4
2
1-4–5

-
4
{1, 2, 4,
5}
2
1–2
3
1-4-5–3
1
1–4
2
1-4–5
4
1-4-5–6
5
{1, 2, 3,
4, 5}
2
1–2
3
1-4-5–3
1
1–4
2
1-4–5
4
1-4-5–6
6
{1, 2, 3,
4, 5, 6}
2
1-2
3
1-4-5-3
1
1-4
2
1-4–5
4
1-4-5-6
26