PF0100 and PF0200 Product Summary - NON

Download Report

Transcript PF0100 and PF0200 Product Summary - NON

TM
NON-CONFIDENTIAL
OK for distribution to customers without NDA
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the
Energy Efficient Solutions logo, mobileGT, PowerQUICC, QorIQ, StarCore and Symphony are
trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Airfast, BeeKit, BeeStack,
ColdFire+, CoreNet, Flexis, Kinetis, MagniV, MXC, Platform in a Package, Processor Expert, QorIQ
Qonverge, Qorivva, QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, VortiQa
and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are
TM
the property of their respective owners. © 2012 Freescale Semiconductor, Inc.
Confidential and Proprietary
1
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the Energy Efficient Solutions logo, mobileGT, PowerQUICC, QorIQ, StarCore
and Symphony are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Airfast, BeeKit, BeeStack, ColdFire+, CoreNet, Flexis, Kinetis, MagniV,
MXC, Platform in a Package, Processor Expert, QorIQ Qonverge, Qorivva, QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, VortiQa and Xtrinsic are
trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2012 Freescale Semiconductor, Inc.
Most economical quick-turn programmable 14-ch/11.7A system power
management solution with fully configurable voltages, sequencing and timings
Differentiating Points
**
- Optimized to work with i.MX6 processors
- Quick-turn customizable output voltages,
sequencing and timings
-
Boost regulator to 5.0 V out for USB
-
Field programmable OTP memory
- Power control logic with processor interface
and event detection
Product Features
- 2.8V to 4.5V input voltage
- 14-ch,11.7A (PF0100); 12-ch, 7.5A (PF0200);
- 4 to 6 Channel configurable buck converters
- 6 user programmable LDO
** MMPF0200 has 3/4 buck regulators instead of 5/6
Applications
- Forced PWM or automatic PSM operation
-
Performance tablets, eReaders, Navigation
- Boost regulator, coin cell charger, DDR reference
-
Industrial single board computers
- Programmable output voltage, current limit, soft-start,
Fsw, OTP fault interrupt
-
Point of sale (POS) terminals
-
Automotive infotainment
- High power 8x8 mm TQFN wettable flank package
-
Human-machine interface, Home Automation
- Consumer, Industrial and Automotive grade available
-
Portable Medical
2
TM
Features
Quick turn customization (OTP configuration)
4 to 6 Buck Converters
6 LDOs, Integrated Boost regulator for USB
Benefits
Try before buy option, faster time to market
High Efficiency, lower Power dissipation , Longer battery life
Lower external component count
Programmable output voltage, sequence, timing
Faster design cycle
Coin cell charger, RTC Supply
Lower overall BOM
I2C digital interface for programmability
PFM/PSM or ASM (Pulse Skipping Mode)
8x8mm TQFN power package
On the fly voltage scaling for better system efficiency
Higher light load efficiency – longer battery standby time
Better thermal performance
TM
Economical quick-turn programmable PMIC for flexible, high efficiency powering of
complete embedded system solutions
Quick-turn Programmable
High Efficiency Conversion
System Power Flexibility
Quick time to market; lower schedule
risk; system design flexibility
Lowest system power
and longest battery life
Lower BOM and smaller footprint with
up to 14 outputs configurable for few
high power or many low power outputs
•
1.2V/1.2A out
– 82% vs. 65-78%
Applicable for powering large variety of
system architectures
•
SW1 – 1x 4.5A or 1x 2.5A + 1x 2.0A
•
1.2V/100uA out
– 80% vs. 30-55%
•
SW3 – 1x 2.5A or 2x 1.25A
•
1.8V/0.5A out
– 88% vs. 85-90%
•
i.MX6 Quad
•
SW1ABC – 0.3V to 1.875V
•
1.8V/100uA out
– 80% vs. 40-62%
•
1GB memory
•
SW2/3/4 – 0.4V to 3.3V
•
Flash/ SD Card
•
LDO1/2 – 0.8V to 1.55V
•
Audio
•
LDO3/4/5/6 – 1.8V to 3.3V
•
Sensors
•
32 step sequencing per channel
•
Camera
•
0.5ms to 4ms per step
•
Ethernet
•
USB/HDMI/USB
TM
Fast Evaluation of SBC performance
•
•
Generic Family Evaluation Platform kit
EVB of MMPF0100
• Friendly Graphical Interface
 USB interface
SABRE Ref Design
Std Eval Board
Complete Technical Documentation available to ease Design
▪ Datasheets, Application notes, EVB contents
▪ SafeAssure Support Covering Safety Manual, FMEDA, Pin FMEA
▪ QA available
Easy to Use tools: Support design wins (also on compass)
▪ GUI and Test bench available to test efficiency, temp rise etc
▪ Technical Training and hands on training
▪ OTP programming documentation available
TM