Communication
Download
Report
Transcript Communication
Unit 1
Communication, Homeostasis and Energy
Module 3: Ecosystems and Sustainability
Define the term ecosystem.
State that ecosystems are dynamic
systems.
Define the terms biotic factor and
abiotic factor, using named examples.
Define the terms producer, consumer,
decomposer and trophic level.
Describe how energy is transferred
though ecosystems.
Ecology
The study of how whole communities of living
organisms interact with each other and with their
environment.
Ecosystem
A relatively self-contained, interacting community
of organisms, and the environment in which they
live and with which they interact.
Habitat
The place where an organism lives
Population
The number of individuals of the same
species, living in the same place at the
same time.
Community
All the organisms, of all the different
species living in a habitat.
Niche
The role of an organism in the ecosystem.
Flow of energy
Energy flows
▪ into an ecosystem from outside
▪ through an organism in the ecosystem
▪ leaves the ecosystem
Recycling of materials
Matter cycles round an ecosystem, where
some atoms are reused over and over
again by different organisms.
Biotic factors involve other living
organisms
Feeding of herbivores on plants
Predation
Parasitism
Mutualism
competition
Abiotic factors involve the non living
components of the environment
Temperature
Light intensity
Oxygen concentration
Carbon dioxide concentration
Water supply
pH
Availability of inorganic ions
Edaphic features
Atmospheric humidity
Wind speed
Living
organisms
need a
constant supply
of energy to
drive metabolic
reactions and
to stay alive.
A food chain shows the way in which
energy flows from producer to
consumers
Arrows indicate the direction that the
energy flows
Oak tree caterpillar great tit sparrowhawk
Each position along the food chain is
called a trophic level
A food web
shows all the
different
interrelationships
between many
food chains.
The role of decomposers in the
ecosystem is to feed on detritus
Detritus is organic matter in dead
organisms and waste material
Decomposers include
Bacteria
Fungi
Detritivores
▪ Earthworms etc
When energy is transferred from one form to
another, some energy is always lost as heat
Less than 3% of
sunlight is
converted to
chemical energy
Sunlight missing
leaves
Reflection of light
Transmission of light
Not all the light
absorbed is used for
photosynthesis
1o = primary
Productivity
rate at which the plant converts light
energy into chemical potential energy
Gross 1o Productivity (GPP)
total quantity of energy converted by
plants in this way
Net 1o Productivity (NPP)
energy which remains as chemical energy
after plants have supplied their own needs
in respiration
Only about 10% of the energy in plants
gets passed on to the animals that eat
them.
half of the chemical energy in plants is
used by the plants themselves (respiration)
not all the parts of the plants are eaten
not all the parts eaten are digestible
energy loss as heat from digestive system
as food is digested
Classify each of these features as biotic or
abiotic
The speed of water flow in a river
The density of seaweed growing in a rock pool
The oxygen availability on a high altitude
mountainside
Energy losses from mammals and birds tend
to be significantly greater than from other
organisms. Suggest why this is.
Outline how energy transfers between
trophic levels can be measured.
Discuss the efficiency of energy
transfers between trophic levels.
Explain how human activities can
manipulate the flow of energy through
ecosystems.
Pyramid of biomass
Area of the bars is proportional to the dry
mass of all the organisms at that trophic
level
Pyramid of energy
Bars represent energy available
Organisms are burned in a calorimeter
and the amount of heat energy released
per gram is worked out.
Net Primary productivity (NPP) is the
difference between primary
productivity and respiratory head (R)
NPP is the rate of production of
biomass available for heterotrophs
By manipulating environmental
factors, humans can increase NPP.
Increasing light levels
Increase water availability
Maintain a constant temperature
Provide the correct nutrients required
for photosynthesis and growth
Pest control
Disease control
Remove competition
Manipulating the energy from producer to
consumer
Harvest animals before adulthood
Treat with steroids
Selective breeding
Treat with antibiotics
Maintain constant temperature
Limit movement
Supply food
A balance needs to lie between animal
welfare and efficient food production.
Gradual change in a
community over a period of
time
Describe one example of primary
succession resulting in a climax
community.
Succession
Pioneer community
Climax community
Seral stages
Sere
Succession
Gradual directional change in a
community of organisms over time
its unidirectional
Primary succession
Original area has no soil or living organisms
present
Secondary succession
Following disturbance of the area, soil is
present.
New land is formed on the Earth’s surface at
river deltas, at sand dunes and from cooled
volcanic lava.
When new land is exposed it is invaded and
colonised by plants, a sequence of
communities develops over time by Primary
succession
Secondary succession is the colonisation of
an area that has been previously occupied
and become barren.
The gradual replacement of one plant
community by another over a period
of time, through a series of seral
stages, starting with the pioneer
community and ending with a climax
community.
The first plants to colonise an area are
pioneer plants, which are adapted to
survive in difficult conditions.
These are usually mosses or grass
As they grow these plants change the
environmental conditions until they are no
longer the best suited.
Better adapted plants start to colonise.
Suggest and explain what happens to
each of the following during the
process of succession.
The number of different species in the
community
The quantity of biomass per unit area
Plants colonise an area, they change
it in such a way that they are no
longer the best adapted to survive
there and are out competed, new
plants then colonise the area.
Pioneer
community
Climax
community
In the early stages of succession,
abiotic factors are important in
determing what can survive.
Availability of water
Availability of nutrients in the soil
Wind exposure
Clearing of deciduous woodland for
Agriculture
Conifer forestry
Human settlement
Intensive grazing by sheep can deflect
succession from a forest climax
community to grassland.
A deflected climax community is
known as a plagioclimax
Describe how the distribution and
abundance of organisms can be
measured, using line transects, belt
transects, quadrats and point
quadrats.
We can use the distribution of the
communities in space on the ground
to show us what they look like at
different times during a succession
Examples
▪ Retreating glacier (Glacier Bay, Alaska)
▪ Sand dunes
Plant and animal communities can be
sampled using
Point quadrats
Quadrats
Transects
Transects are the best way showing
succession
Line transect
Record what is touching the tape
Belt transect
Quadrats are placed alongside the tape
Continuous belt transect
▪ Record along the whole length of the tape
Interrupted belt transect
▪ Record at intervals along the tape
Distribution
Presence or absence of each species
Abundance
Estimate or count the number of
individuals
Percentage cover
Population size of
a species
=
Mean number of
individuals of the species
in each quadrat
Fraction of the total habitat
area covered by a quadrat
Describe the role of decomposers in
the decomposition of organic
material.
Describe how micro-organisms recycle
nitrogen within ecosystems
Nutrient cycling
Provides elements for
▪ metabolic processes
▪ Constructing organic molecules
Decomposition
Provides mineral and nutrients for
metabolism
Decomposers
Bacteria and fungi
Absorb organic nutrients from dead
organisms and waste from living
organisms, converting them into inorganic
molecules
Detritivores
Organisms living in or on the soil that feed
and gain nutrients from detritus.
Breakdown of dead organic matter
with release of inorganic nutrients into
surrounding soil
Litter
decomposition
Humus
Factors
Type of organic matter present
Number and types of decomposers and
detritivores
Environmental conditions
▪ Temperature
▪ O2 content
▪ moisture
Nutrients in
environment
decomposition
decomposers
consumers
producers
The carbon cycle
Carbon dioxide
In the air (CO2)
photosynthesis
respiration
Combustion
(burning)
Fossil fuels
Coal, oil, gas, peat
feeding
Carbon compounds
in plants
Carbon
compounds
in animals
decay
Most nutrient cycles have two components
Geochemical
Biological
Cycling of Nitrogen
Nitrogen fixation
Assimilation
Ammonification
Nitrification
denitrification
Nitrogen gas converted to nitrogencontaining compounds.
Three ways – all require energy
Lightning
▪ nitrogen + oxygen oxides of nitrogen
Industrial processes
▪ Haber process – combine hydrogen and
nitrogen to form ammonia
Fixation by micro-organisms
Free-living nitrogen fixers
Bacteria reduce nitrogen to ammonia
Used to manufacture amino acids
Nitrogen rich compounds released when
die and decay.
Mutualistic nitrogen fixers
E.g. Rhizobium
Live in root nodules of leguminous plants
Nitrogenase converts N2 to NH4+ using H+
and ATP
Requires anaerobic conditions
(leghaemoglobin)
Plant uses ammonium ions to make amino
acids
Nitrogen assimilated in the form of
ammonium ions
Nitrate ions reduced to nitrite ions and then
ammonium ions.
Animals assimilate nitrogen in the form of
protein
Production of ammonium-containing
compounds
E.g urea, protein, nucleic acids and
vitamins
Decomposers feed on these releasing
ammonia
Two stages
Oxidation of ammonium ions to nitrites
▪ Nitrosomonas
Oxidation of nitrites to nitrates
▪ Nitrobacter
Anaerobic denitrifying bacteria
Reduce soil nitrates into nitrogen gas
NO3- NO2- N2O
N2
Nitrogen in atmosphere (N2)
Nitrogen-fixing
bacteria in root
nodules of
legumes
animals
Plants
assimilation
Decomposers
(aerobic and
anaerobic bacteria
and fungi)
ammonification
Nitrogen-fixing
soil bacteria
Ammonium
(NH4+)
Denitrifying
bacteria
Nitrates
(NO3-)
Nitrobacter
Nitrification
Nitrosomonas
Nitrites
(NO2-)