Transcript Electromegnatic Induction - GTU e

HASMUKH GOSWAMI COLLEGE OF ENGINEERING
BRANCH : INFORMATION TECHNOLOGY
SUBJECT : ELEMENTS OF ELECTRICAL
ENGNEERING
Electromagnetic
Induction
• The magnitude and direction of the
induced current or emf in a conductor
moving with respect to a given B-field.
• The magnetic flux through an area in a
given B-field.
• Apply Lenz’s law and the right-hand rule
to determine directions of induced emf.
• Describe the operation and use of ac and
dc generators or motors.
Induced Current
When a conductor moves
across flux lines, magnetic
forces on the free electrons
induce an electric current.
Right-hand force rule shows
current outward for down and
inward for up motion. (Verify)
Down
B
Down
I
Up
Up
F
v
B
I
v
F
B
Induced EMF
Faraday’s observations:
B Flux lines F in Wb
• Relative motion induces emf.
• Direction of emf depends on
direction of motion.
N turns; velocityv
• Emf is proportional to rate at
which lines are cut (v).
Faraday’s Law:
• Emf is proportional to the
number of turns N.
F
E = -N
t
The negative sign means that E opposes its cause.
Magnetic Flux Density
• Magnetic flux lines
F are continuous
and closed.
F
B
A
A
f
• Direction is that
of the B vector at
any point.
Magnetic Flux
density:
When area A is
perpendicular to flux:
F
B  ; F = BA
A
The unit of flux density is the weber per square meter.
Magnetic flux
The flux penetrating the
area A when the normal
vector n makes an angle
of q with the B-field is:
F  BA cosq
n
A
q
a
B
The angle q is the complement of the angle a that the
plane of the area makes with B field. (Cos q = Sin a)
Example 1: A current loop has an area of 40 cm2
and is placed in a 3-T B-field at the given angles.
Find the flux F through the loop in each case.
x
x
x
x
x x
x x
A
x x
x x
x
x
x
x
A = 40 cm2
n
n
q
n
(a) q = 00 (b) q = 900 (c) q = 600
(a) F = BA cos 00 = (3 T)(0.004 m2)(1);
F  12.0 mWb
(b) F = BA cos 900 = (3 T)(0.004 m2)(0);
F  0 mWb
(c) F = BA cos 600 = (3 T)(0.004 m2)(0.5); F  6.00 mWb
Application of Faraday’s Law
Faraday’s Law:
F
E = -N
t
A change in flux F can
occur by a change in area or
by a change in the B-field:
F = B A
Rotating loop = B A
n
n
n
F = A B
Loop at rest = A B
Example 2: A coil has 200 turns of area 30 cm2.
It flips from vertical to horizontal position in a
time of 0.03 s. What is the induced emf if the
constant B-field is 4 mT?
N = 200 turns
n
A = 30 cm2 – 0 = 30 cm2
F = B A = (3 mT)(30 cm2)
F = (0.004 T)(0.0030 m2)
F = 1.2 x 10-5 Wb
F
1.2 x 10-5 Wb
E  N
 (200)
t
0.03 s
N
q
B
S
B = 4 mT; 00 to 900
E = -0.080 V
The negative sign indicates the polarity of the voltage.
Lenz’s Law
Lenz’s law: An induced current will be in such a direction
as to produce a magnetic field that will oppose the
motion of the magnetic field that is producing it.
Induced B
Induced B
Left motion
I
N
S
Flux increasing to left induces
loop flux to the right.
I
Right motion
N
S
Flux decreasing by right move
induces loop flux to the left.
Example 3: Use Lenz’s law to determine direction
of induced current through R if switch is closed
for circuit below (B increasing).
Close switch. Then what is
direction of induced current?
R
The rising current in right circuit causes flux to increase
to the left, inducing current in left circuit that must
produce a rightward field to oppose motion. Hence
current I through resistor R is to the right as shown.
Directions of Forces
and EMFs
An emf E is induced by
moving wire at velocity v
in constant B field. Note
direction of I.
From Lenz’s law, we see
that a reverse field (out) is
created. This field causes a
leftward force on the wire
that offers resistance to the
motion. Use right-hand
force rule to show this.
x x x x x x x x x
x x x x x xI x x
x x x x x x x x x
x x I x x x x v x vx
x x x x x Lx x x x
x x x x x x x x
x x x x x x x x x
x
I
B
v
Induced
emf
x x x
x x
x x x
x x
x x x
x x
x x x
I
v
Lenz’s law
B
Motional EMF in a Wire
Force F on charge q in wire:
F = qvB; Work = FL = qvBL
Work qvBL
E=

q
q
EMF: E = BLv
x x x x x xI x
x x x x x x
x x x x x x x
x Ix x x x x
x x x x L
x xv x
x x x x x x
x x x x x x x
B
v sin q
q
B
v
x
If wire of length L moves with
velocity v an angle q with B:
E = BLv sinq
F
v
Induced Emf E
Example 4: A 0.20-m length of wire moves
at a constant speed of 5 m/s in at 1400 with
a 0.4-T B-Field. What is the magnitude and
direction of the induced emf in the wire?
E = BLv sinq
v
E = (0.4 T)(0.20 m)(5 m/s)sin140
0
E = -0.257 V
Using right-hand rule, point fingers
to right, thumb along velocity, and
hand pushes in direction of induced
emf—to the north in the diagram.
North
q
B
South
v
South
I
North
B
The AC Generator
• An alternating AC current is
produced by rotating a loop
in a constant B-field.
• Current on left is outward
by right-hand rule.
Rotating Loop in B-field
B
I
v
v I
B
• The right segment has an
inward current.
• When loop is vertical, the
current is zero.
I in R is right, zero, left, and then zero as loop rotates.
Operation of AC Generator
I=0
I=0
Induced EMF
Rectangular
loop a x b
Each segment a
has constant
velocity v.
a
b
.
n
Both segments a moving with
v at angle q with B gives emf:
E = Bav sin q ; v  w r  w  b 2 
ET  BAw sin q
B
q
B
Area A = ab
ET  2Ba w b 2  sin q
n
q
b/2 x v
v = wr
q
r = b/2
v sin q
n
B
v
x q
x
.
x
Current of Generator
.
+E
-E
The emf varies sinusoidally with max and min emf
For N turns, the EMF is:
E  NBAw sinq
The Electric Motor
In a simple electric motor, a current loop experiences a
torque which produces rotational motion. Such motion
induces a back emf to oppose the motion.
Applied voltage – back emf
= net voltage
V – Eb = IR
Since back emf Eb increases with
rotational frequency, the starting
current is high and the operating
current is low: Eb = NBAw sin q
Eb
I
V
Electric Motor
Example 6: A series-wound dc motor has an
internal resistance of 3 W. The 120-V supply
line draws 4 A when at full speed. What is the
emf in the motor and the starting current?
V – Eb = IR
Recall that:
Eb
I
120 V – Eb = (4 A)(3 W
V
The back emf
in motor:
Eb = 108 V
The starting current Is is found by noting that Eb = 0
in beginning (armature has not started rotating).
120 V – 0 = Is (3 W
Is = 40 A
Faraday’s law
Faraday’s Law:
F
E = -N
t
A change in flux F can
occur by a change in area or
by a change in the B-field:
F = B A
F = A B
Calculating flux through an area in a B-field:
F
B  ; F = BA
A
F  BA cosq
Lenz’s law
Lenz’s law: An induced current will be in such a direction
as to produce a magnetic field that will oppose the
motion of the magnetic field that is producing it.
Induced B
Induced B
Left motion
I
N
S
Flux increasing to left induces
loop flux to the right.
I
Right motion
N
S
Flux decreasing by right move
induces loop flux to the left.
Induced emf
An emf is induced by a wire
moving with a velocity v at an
angle q with a B-field.
E = BLv sinq
B
v sin q
q
v
Induced Emf E
In general for a coil of N turns of area A rotating
with a frequency in a B-field, the generated emf
is given by the following relationship:
For N turns, the EMF is:
E  NBAw sinq
Example
The ac generator is
shown to the right. The
dc generator and a dc
motor are shown below:
V
DC Generator
Electric Motor