Transcript Chapter 16

How to Use This Presentation
• To View the presentation as a slideshow with effects
select “View” on the menu bar and click on “Slide Show.”
• To advance through the presentation, click the right-arrow
key or the space bar.
• From the resources slide, click on any resource to see a
presentation for that resource.
• From the Chapter menu screen click on any lesson to go
directly to that lesson’s presentation.
• You may exit the slide show at any time by pressing
the Esc key.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Resources
Bellringers
Chapter Presentation
Transparencies
Standardized Test Prep
Visual Concepts
Math Skills
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Electricity
Table of Contents
Section 1 Electrical Charge and Force
Section 2 Current
Section 3 Circuits
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Objectives
• Indicate which pairs of charges will repel and which
will attract.
• Explain what factors affect the strength of the electric
force.
• Describe the characteristics of the electric field due
to a charge.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Bellringer
1. Static electricity is a part of life. Can you name at least
five examples of static electricity that occur in your
home?
2. Fabric softeners are commonly used today because
they eliminate static cling.
3. Explain why clothes in the dryer get static cling.
4. Why can walking across a carpeted room be a
shocking experience?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Charge
• Electric charge is an electrical property of matter
that creates electric and magnetic forces and
interactions.
• Like charges repel, and opposite charges attract.
• The two types of charges are called positive and
negative.
• An object’s electric charge depends on the imbalance
of its protons and electrons.
• Electrons are negatively charged, protons are
positively charged, and neutrons are neutral (no
charge).
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Charge
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Charge, continued
• Negatively charged objects have more electrons
than protons.
• Positively charged objects have fewer electrons
than protons.
• The SI unit of electric charge is the coulomb, C.
• A proton has a charge of 1.6  10–19 C
• An electron has a charge of 1.6  10–19 C.
• The net electric charge of a charged object is
always a multiple of 1.6  10–19 C.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Characteristics of Electric Charge
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Charge, continued
• Conductors allow charges to flow; insulators do not.
• An electrical conductor is a material in which charges can
move freely and that can carry an electric current.
• An electrical insulator is a material that does not transfer
current easily.
• Objects can be charged by the transfer of electrons.
• The outermost electrons can be easily transferred from one
atom to another.
• Charging by friction is when one material gains electrons
and becomes negatively charged, and the other loses
electrons and becomes positively charged.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electrical Conductors and Insulators
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Friction
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Charge, continued
• Objects can also be charged without friction.
• One way to charge a neutral object without friction is by
touching it with a charged object.
• Objects charged in this manner are said to be charged by
contact.
• Charges move within uncharged objects.
• The charges in a neutral conductor can be redistributed
without contacting a charged object.
• Although the total charge on the conductor will be zero,
the opposite sides will have an induced charge.
• This polarization of the atoms or molecules of an insulator
produces an induced charge on the surface of the
insulator.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Charging by Contact
When a negative rod touches a
neutral doorknob, electrons move
from the rod to the doorknob.
The transfer of electrons to
the metal doorknob gives
the doorknob a net negative
charge.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Charging by Contact
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Induced Charges
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Force
• Electric force is the force of attraction or repulsion
between objects due to charge.
• The electric force at the atomic and molecular level is
responsible for most of the common forces we can
observe.
• The electric force is also responsible for effects that we
can’t see.
• Electric force depends on charge and distance.
• The electric force between two objects is proportional
to the product of the charges on the objects.
• The electric force is inversely proportional to the
square of the distance between two objects.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Force, continued
• Electric force acts through a field.
• An electric field is a region in space around a
charged object that causes a stationary charged
object to experience an electric force.
• One way to show an electric field is by drawing
electric field lines.
• Electric field lines point in the direction of the
electric force on a positive charge.
• The electric field lines around a positive charge point
outward.
• The electric field lines around a negative charge point
inward.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Field Lines
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Field Lines
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Force, continued
• Electric field lines never cross one another.
• Field lines show both the direction of an electric
field and the relative strength due to a given
charge.
• More lines are drawn for greater charges to
indicate greater force.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 1 Electrical Charge and
Force
Electric Fields and Test Charges
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Objectives
• Describe how batteries are sources of voltage.
• Explain how a potential difference produces a
current in a conductor.
• Define resistance.
• Calculate the resistance, current, or voltage, given
the other two quantities.
• Distinguish between conductors, superconductors,
semiconductors, and insulators.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Bellringer
1. Dry cell batteries are a source of mobile electrical
power. Name five devices that use dry cell batteries.
2. Give reasons why copper is normally used to wire a
home for electricity.
3. Why is it important to unplug a device by pulling the
plug instead of by yanking it out of the socket by
pulling on the electrical cord?
4. Why are electrical appliances, such as razors, hair
dryers, and curling irons, not to be used in the
bathtub or shower?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Voltage and Current
• Electrical potential energy is the ability to move an
electric charge from one point to another.
• The electrical potential energy of the moving
charge decreases because the electric field does
work on the charge.
• The electrical potential energy depends on the
distance between two charged objects for both an
attractive and a repulsive electric force.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electrical Potential Energy
The electrical potential energy between two negative charges decreases as the
distance between them increases.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electrical Potential Energy and Relative
Position
The electrical potential energy of a charge depends on its position in an electric field.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electrical Potential Energy
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Voltage and Current, continued
• Potential difference is measured in volts.
• The potential difference between any two points,
is the work that must be done against electric
forces to move a unit charge from one point to the
other.
• The volt, V, is equivalent to one joule per coulomb
(1 J/C).
• Potential difference is often called voltage.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Potential Difference
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Voltage
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Voltage and Current, continued
• There is a voltage across the terminals of a battery.
• A cell is a device that is a source of electric
current because of a potential difference, or
voltage, between the terminals.
• One terminal is positive, and the other is
negative.
• Batteries convert chemical energy into electrical
energy.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Battery
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electric Cell
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Voltage and Current, continued
• A voltage sets charges in motion.
• Current is the rate that electric charges move
through a conductor.
• The SI unit of current is the ampere, A.
• 1 amp = 1 C/s
• A battery is a direct current source because the charges
always move from one terminal to the other in the same
direction.
• Conventional current is defined as movement of
positive charge.
• The direction of current in a wire is opposite the direction
that electrons move in that wire.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Comparing Direct and Alternating Current
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Conventional Current
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electrical Resistance
• Resistance is the opposition posed by a material or a
device to the flow of current.
• Resistance is caused by internal friction, which slows
the movement of charges through a conducting
material.
• Resistance can be calculated from current and voltage.
voltage
resistance =
current
V
R=
I
• The SI unit of resistance is the ohm, Ω. 1 Ω = 1
V/A
• A resistor is a special type of conductor used to
control current.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Math Skills
•
Resistance The headlights of a typical car are
powered by a 12 V battery. What is the resistance of
the headlights if they draw 3.0 A of current when
turned on?
1. List the given and unknown values.
Given:
current, I = 3.0 A
voltage, V = 12 V
Unknown: resistance, R = ? Ω
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Math Skills, continued
2. Write the equation for resistance.
voltage
resistance =
current
V
R=
I
3. Insert the known values into the equation, and
solve.
V
12 V
R=
=
I
3.0 A
R = 4.0 
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 2 Current
Electrical Resistance, continued
• Conductors have low resistances.
• Some materials become superconductors below a
certain temperature.
• Certain metals and compounds have zero resistance when
their temperature falls below a certain temperature called
the critical temperature.
• Semiconductors are intermediate to conductors and
insulators.
• The controlled addition of specific atoms of other materials
as impurities dramatically increases a semiconductor’s
ability to conduct electric charge.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Objectives
• Use schematic diagrams to represent circuits.
• Distinguish between series and parallel circuits.
• Calculate electric power using voltage and current.
• Explain how fuses and circuit breakers are used to
prevent circuit overload.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Bellringer
1. Inexpensive electrical power is essential. List at least ten
electrical devices that you have used today.
2. In some strings of Christmas lights, none of the lights work
if one light is burned out. What is a possible explanation
for this?
3. A big feast is being prepared for several people in a home.
The cooks are using a turkey roaster, the oven, an electric
mixer, the blender, and the toaster. Every light is on and so
is the refrigerator. All at once the power in the kitchen goes
out. What is an explanation for this, and how can it be
corrected?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
What Are Circuits?
• An electric circuit is a path through which charges
can be conducted.
• An electric circuit is a set of electrical
components connected such that they provide one
or more complete paths for the movement of
charges.
• The conducting path produced when a light bulb is
connected across the battery’s terminals is called a
closed circuit.
• Without a complete path, there is no charge flow and
therefore no current. This is called an open circuit.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Electric Circuit
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
What Are Circuits?, continued
• Switches interrupt the flow of charges in a circuit.
• You can use a switch to open and close a circuit.
• Schematic diagrams are used to represent circuits.
• A schematic diagram is a graphical representation
of a circuit that uses lines to represent wires and
different symbols to represent components.
• Each element used in a piece of electrical
equipment is represented by a symbol that reflects
the element’s construction or function.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Schematic Diagram and Common Symbols
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Series and Parallel Circuits
• Series circuits have a single path for current.
• When appliances or other devices are connected
in a series circuit, they form a single pathway for
charges to flow.
• In a series circuit, the components of a circuit form
a single path for current.
• The current in each device is the same.
• The resistances may be different.
• The voltage across each device in a series circuit can be
different.
• If one element along the path in a series circuit is
removed, the circuit will not work.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Resistors in Series
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Series and Parallel Circuits, continued
• Parallel circuits have multiple paths for current.
• A parallel circuit is a circuit in which all of the
components are connected to each other side by
side.
• The voltage across each device is the same.
• The current in each device does not have to be
the same.
• A break in any one path in a parallel circuit does
not interrupt the flow of electric charge in the other
paths.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Resistors in Parallel
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Series and Parallel
When bulbs are connected in
series, charges must pass
through both light bulbs to
complete the circuit.
When devices are connected in
parallel, charges have more than
one path to follow. The circuit can
be complete even if one light
bulb burns out.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Electric Power and Electrical Energy
• Electrical energy is the energy that is associated
with charged particles because of their positions.
• Electric power is the rate at which electrical energy is
used in a circuit.
• The rate at which electrical work is done is called
electric power.
power  current  voltage
P = IV
• The SI unit for power is the watt (W).
• 1W=1A1V
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Electric Power and Electrical Energy, continued
• If you combine the electric power equation above
with the equation V = IR, the power lost, or
dissipated, by a resistor can be calculated.
2
V
P = I 2R =
R
• Electric companies measure energy consumed in
kilowatt-hours.
• 1 kW•h = 3.6  106 J.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Equation for Electric Power
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Math Skills
•
Electric Power When a hair dryer is plugged into a
120 V outlet, it has a 9.1 A current in it. What is the
hair dryer’s power rating?
1. List the given and unknown values.
Given:
voltage, V = 120 V
current, I = 9.1 A
Unknown: electric power, P = ? W
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Math Skills, continued
2. Write the equation for electric power.
power = current × voltage
P = IV
3. Insert the known values into the equation, and
solve.
P = (9.1 A)(120 V)
P = 1.1 × 103 W
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Fuses and Circuit Breakers
• When electrical wires carry more than a safe level of
current, the circuit is said to be overloaded.
• A short circuit can happen if a wire’s insulation wears
down, two wires may touch, creating an alternative
pathway for current.
• Fuses melt to prevent circuit overloads.
• A fuse an electrical device that contains a metal
strip that melts when current in the circuit
becomes too great.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Fuses and Circuit Breakers
• Circuit breakers open circuits with high current.
• A circuit breaker a switch that opens a circuit
automatically when the current exceeds a certain
value.
• The circuit breaker acts as a switch.
• Unlike fuses, circuit breakers can be reset by
turning the switch back on.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Fuse
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Section 3 Circuits
Concept Mapping
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts
1. A 12-volt battery is connected to a light bulb that has
a resistance of 240 ohms. Calculate the amount of
current in amperes drawn by the circuit.
A. 0.05 A
B. 0.5 A
C. 2.0 A
D. 20.0 A
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
1. A 12-volt battery is connected to a light bulb that has
a resistance of 240 ohms. Calculate the amount of
current in amperes drawn by the circuit.
A. 0.05 A
B. 0.5 A
C. 2.0 A
D. 20.0 A
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
2. Which of the following statements is true?
F. Electrical forces exist between any two neutral
particles.
G. Electrical forces exist between any two charged
particles.
H. Electrical forces exist only between particles with
the same charge.
I. Electrical forces exist only between particles with
opposite charges.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
2. Which of the following statements is true?
F. Electrical forces exist between any two neutral
particles.
G. Electrical forces exist between any two charged
particles.
H. Electrical forces exist only between particles with
the same charge.
I. Electrical forces exist only between particles with
opposite charges.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
3. What happens to an object that is charged by
induction?
A. It acquires excess electrons.
B. It remains electrically neutral.
C. It acquires a net charge from the object that is
inducing the charge.
D. A current exists between it and the object that is
inducing the charge.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
3. What happens to an object that is charged by
induction?
A. It acquires excess electrons.
B. It remains electrically neutral.
C. It acquires a net charge from the object that is
inducing the charge.
D. A current exists between it and the object that is
inducing the charge.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
4. A stream of water is deflected when a negatively
charged rod is held close to it. Use the concept of
induced charge to explain what happens.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
4. A stream of water is deflected when a negatively
charged rod is held close to it. Use the concept of
induced charge to explain what happens.
Answer: A charge is induced on the water by the
charged rod. Attraction between the charged part of
the stream and the rod deflects the flow.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
5. How does a fuse protect a circuit from overloading?
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Understanding Concepts, continued
5. How does a fuse protect a circuit from overloading?
Answer: The fuse has a thin wire with a low melting
point. When electrical resistance increases the
temperature too high, it melts and breaks the circuit.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Reading Skills
In 1909 Robert Millikan measured the charge on an
electron in what is known as the oil-drop experiment.
He sprayed oil droplets into a chamber. Two plates
with opposite charges produced an electric field.
Some of the drops acquired a negative charge. The
field was adjusted so there was an upward force
equal to the downward pull of gravity. From the
strength of this force, Millikan could calculate the
amount of the electric charge on the drop.
6. Analyze how the electric field could cause an oil
drop to float inside the chamber.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Reading Skills, continued
6. Analyze how the electric field could cause an oil
drop to float inside the chamber.
Answer: Electrical forces between the charged particle
an the charged plates balance the downward pull of
gravity.
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Interpreting Graphics
7. Which metal would be the
best choice for a power
line, based on electrical
resistance?
F. aluminum
G. iron
H. lead
I. silver
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Interpreting Graphics
7. Which metal would be the
best choice for a power
line, based on electrical
resistance?
F. aluminum
G. iron
H. lead
I. silver
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Interpreting Graphics
8. Which metal would most
likely be then best
substitute for the tungsten
filament in an incandescent
light bulb based on
resistance?
A. aluminum
B. iron
C. lead
D. silver
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.
Chapter 16
Standardized Test Prep
Interpreting Graphics
8. Which metal would most
likely be then best
substitute for the tungsten
filament in an incandescent
light bulb based on
resistance?
A. aluminum
B. iron
C. lead
D. silver
Chapter menu
Resources
Copyright © by Holt, Rinehart and Winston. All rights reserved.