Transcript IP addresses

BCIS 4630 Fundamentals of IT Security
NETWORKING (Par t1)
Dr. Andy Wu
OSI Model
2





Network communications protocols are developed using
the Open System Interconnection (OSI) model.
An ISO standard for worldwide communications.
The OSI model defines a framework for implementing
protocols in seven distinct layers.
Each layer makes use of the services of the layer below
it to provide a set of specific services to the layer
above it.
Adjacent layers communicate with each other through a
well-defined interface, so that in principle, we could
change one layer or even completely rewrite it without
affecting the others.
OSI Layers
3
Layer
Function
Examples
Application
User interface
Program level communication
HTTP, SMTP
Presentation
Presentation format of data
Data conversion if needed
ASCII, JPEG, MP3,
Encryption
Session
Establish and maintain communication channels
OS, Application access
scheduling
Transport
Reliable or unreliable end-to-end communication
Identifies upper layer processes that will receive data
TCP, UDP, SPX
Network
Logical addressing and routing
Delivering packets from source to destination
IP, IPX
Data Link
Transforming physical layer into a reliable link and presenting it
to upper layers
Includes MAC (802.3) and LLC (802.2) sublayers
Ethernet
Physical
Transmission of bit stream over physical medium
Signaling
EIA/TIA 568B
OSI Mnemonic
4
Away
Application
Pizza
Presentation
Sausage
Session
Throw
Transport
Not
Network
Do
Data Link
Please
Physical
Encapsulation
5


When data is passed down from higher layers to
lower ones, each layer creates its header and
places the data given to it by the next-higher layer
behind its own header, thereby encapsulating the
higher layer’s data.
The Data Link layer also creates a trailer.
Encapsulation – Layer 4
6
Encapsulation – Layer 3
7
Encapsulation – Layer 2
8
Network Communication
9
Decomposition – Layer 2
10
Decomposition – Layer 3
11
Decomposition – Layer 4
12
Protocol Data Unit
13


A term that describes a set of bytes that includes the layer’s header
and trailer (if any) and all data encapsulated.
From Layer X’s perspective, the higher-layer headers and the user
data form one large data field.
Layer(s)
PDU
Application, Presentation,
Session
Data
Transport
TCP Segment
UDP Datagram
Network
IP Packet
Data Link
Frame
Physical
Bit
Internet Control Message Protocol
14

Internet Control Message Protocol (ICMP) is a control and
information protocol, which is used to determine:





Remote network’s availability.
Length of time to reach a remote network.
The best route for packets to reach a remote network.
ICMP can handle the flow of traffic, telling other network
devices to “slow down” transmission speeds if packets are
coming in too fast.
ICMP is not connection-oriented (uses UDP).



Designed to carry small messages quickly.
Has minimal overhead.
Has minimum impact to bandwidth.
ICMP Message Types
15

ICMP messages are used to exchange information
about network host status, traffic condition, etc. Two
important fields in an ICMP message are:
Type: A one-byte field to indicate the kind of ICMP
message.
 Code: For message of certain types, a one-byte Code field
may have a value to further identify a message.


For example, a ping command goes from one host to
another and receive a response from the latter. Two
types of ICMP messages are involved in this process:
Echo Request
 Echo Reply

ICMP Messages
16
Type
Description
0
Echo Reply
3
Destination Unreachable
4
Source Quench
5
Redirect Message
8
Echo Request
Code
Description
0
Network unreachable
1
Host unreachable
3
Port unreachable
6
Destination network unknown
7
Destination host unknown
Address Translation
17
Types of Addresses
18



Communications between network computers (hosts) would be
impossible without unique addresses for each host.
Computers on a local network use MAC addresses to
communicate with each other.
To access hosts on remote networks, such as those on the
Internet, a computer needs to know their IP addresses.


Routers will route the packets to the destination network by looking up
those IP addresses in the routers’ routing tables.
IP addresses are difficult for humans to memorize, so DNS
Names (e.g., www.unt.edu) are used by humans.
Address Resolution
19

Therefore, two types of address translation (resolution)
are essential to network communications.

DNS Name-IP Address Resolution


When a person uses a human-readable address like www.unt.edu,
that address must be resolved into an IP address.
IP-MAC Address Resolution
Scenario 1: If that IP address is local, the resolution of the IP
address into MAC address takes place right away.
 Scenario 2: If that IP address is remote, the packet is routed to the
remote network first. Then, once the packet gets to the remote
network, it is resolved into a MAC address on that network.
 In both scenarios, the host owning that MAC address will take care
of the packet.

DNS-IP Resolution
20

Domain Name Service (DNS) translates user friendly names
(called Fully Qualified Domain Names, or FQDNs) into IP
addresses.




For example, www.unt.edu = 129.120.188.44
The DNS server handles DNS queries by examining its local
records to see if it knows the answer.
If it does not, the DNS server queries higher level domain
servers. They check records or query the server above them
and so on until a match is found.
A domain’s DNS servers maintain a database that records
all DNS name-IP mappings inside the domain, including
those for web servers, directory servers, email servers, hosts,
etc.
Layer 3: IP Addresses
21

It is common to express the 32-bit IP addresses in a
decimal form (dotted decimal notation).
 The
address is divided from the high-order bit to the
low-order bit into four 8-bit units called octets.
 IP addresses are normally written as four separate
decimal octets delimited by a period (a dot).
 Each octets has eight bits and each bit has two possible
values: 0 and 1.
 Thus, in decimal terms, an octet can have 28 or 256
possible values, ranging from 0 to 255.
Layer 3: IP Addresses
22

An IP address is broken down into two portions: Network ID and Host
ID.





Without subnetting, the end of the network ID falls on a 8-bit boundary
(e.g., the 16th bit in a Class B subnet).
The network ID, or network address, identifies the nodes that are located
on the same logical network.
The host ID, or host address, identifies a node within a network.
An address with a host ID of all zeros is not assigned to any host. It
is reserved to define the network itself (network address, e.g., “the
132.170.0.0 network”).
If the host ID is all 1s, the address is a broadcast address (e.g.,
132.170.255.255). It is used to send a packet to all hosts on a
specific network. It can only be a destination address; no host can
be assigned this address.
IP Addresses
23
Class A
Class B
Class C
Source: Davies and Lee, Windows Server 2003 TCP/IP Protocols and Services.
CIDR Notation
24

A shorthand for subnet masks (n.n.n.n stands for an
IP address). It indicates the number of bits that are
set to 1 in the mask.
 n.n.n.n/8
for class A default mask, equivalent to
255.0.0.0
 n.n.n.n/16 for class B default mask, equivalent to
255.255.0.0
 n.n.n.n/24 for class C default mask, equivalent to
255.255.255.0
Private Addresses
25



An organization can use any IP addresses for its network,
as long as it is not connected to the Internet.
If it wants to use the addresses on the Internet, however, it
has to apply for them from Internet Corporation for
Assigned Names and Numbers (ICANN).
Three blocks of addresses are reserved for private
networks.
Class A: 10.0.0.0 – 10.255.255.255
Class B: 172.16.0.0 – 172.31.255.255
Class C: 192.168.0.0 – 192.168.255.255

Private addresses are not routable on the Internet.
Layer 2: MAC Addresses
26

MAC address is a unique, 48-bit hardware address assigned
to a device by the manufacturer.




Each manufacturer is assigned a specific block of MAC addresses
(the first 24 bits).
The manufacturer assigns the device a unique address (the second
24 bits).
No two devices can share the same MAC address.
For one system to send data to another on the local network, it
must first find out the destination system’s MAC address.
IP-MAC Address Resolution
27



To find a MAC address, the Address Resolution
Protocol (ARP) is used.
Using an ARP request, the sending system will
broadcast a query – “who is 129.120.188.44”?
This broadcast query is examined by every host on
the local network, but only the system whose IP
address is 129.120.188.44 will respond.
IP-MAC Address Resolution
28




That system will send back a response that says “I’m
129.120.188.44 and my MAC address is
00:07:e9:7c:c8:aa.”
The sending system will then format the packet for delivery
and drop it on the network media, with the MAC address of
the destination host.
If a host cannot find the destination host in this way, the
packet is forwarded to the default gateway, which is the
computer/router that knows how to route those packets.
What happens if the receiving “host” is 129.120.255.255?

The broadcast MAC address is all Fs.
Broadcast
29



Used in one-to-everyone communications.
A broadcast IP address is designed to be processed by
every IP node on the same network segment.
It is in the format of
Class A: nnn.255.255.255
 Class B: nnn.nnn.255.255
 Class C: nnn.nnn.nnn.255


The broadcast IP packet is addressed at the Data Link
layer using the network technology's broadcast address.

For example, for Ethernet and Token Ring networks, all IP
broadcasts are sent using the Ethernet and Token Ring
broadcast address 0xFF-FF-FF-FF-FF-FF.
Unicast
30




Used in one-to-one communications.
A packet is sent from an individual source to an
individual destination.
In a hub-connected network, all hosts on the network
segment see the packet.
In normal mode, however, all hosts except the
intended receipt will pick up and process the
packet.