Introduction - Eastern Illinois University

Download Report

Transcript Introduction - Eastern Illinois University

School of Business
Eastern Illinois University
Basic Computer Networks
Configurations
(August 31, 2016)
© Abdou Illia, Fall 2016
Learning Objectives

Outline Basic network configurations

Name kinds of applications that might use each
Configuration
2
Network Configurations?

Ways of organizing data processing
–

Decision on “which configuration” depends on:
–
–

Where to do processing
Available equipment
Applications
Many Basic configurations
3
Basic configurations

Terminal to mainframe computer

Microcomputer to mainframe computer

Microcomputer to local area network

Microcomputer to Internet

Local area network to local area network
4
Basic configurations

Local area network to wide area network

Wide Area network to Wide Area network

Sensor to local area network

Satellite and microwave

Wireless telephone
5
Terminal-to-mainframe configuration

Created in the 1960s
–
–
–

6
Mainframe does all the processing
Terminals are dumb--only a remote screen and keyboard
Created in the 1960s, when microprocessors for terminal
intelligence did not exist
Use in decrease (Legacy Systems)
modem
Terminals
Telephone
Network
modem
Mainframe
Terminal-to-mainframe configuration

Usually, Mainframe
–

–
Entering data into system
Displaying results from the Mainframe
Configuration used for:
–
–

Optimized for business uses--file access speed is more crucial than
mathematical processing
Terminals used for:
–

7
Inquiry/Response applications
Interactive applications
Examples: Airline reservation, Motor Vehicle licensing
Terminal-to-mainframe configuration

Mainframe controls:
–
–
Sending data to the terminals
Receiving data from the terminals

Require special types of protocols

Transmission at relatively slow speed (e.g. 9600 bps)
8
Microcomputer-to-mainframe configuration

Began to emerge in the early 1980s

Usually:
–
–
–
–
9
Mainframes store databases
Microcomputers perform operations on downloaded data
File Server Program Access is used (see next) for processing
Client/Server processing could also be used (see next)

Can be used as a Terminal-to-Mainframe (w. Terminal-emulation cards)

Example: Business employees accessing corporate database
Data are downloaded to
Microcomputer.
Executed There
Uploaded to
Mainframe
Microcomputer
Mainframe
Microcomputer-to-LAN configuration
10
Microcomputer-to-LAN configuration

Client/Server processing system = one of the
most common processing techniques used.
12
13
Client/Server Processing

Division of Labor
–
Client program handles lighter work, such as user
interface chores and light processing chores
–
Server program handles heavy work, such as database
retrieval
Client Program
Client Machine
Server
Program
Server
14
File Server Program Access

File Server Program Access is another Common
Way to Execute Programs in Networks with
Microcomputer-to-LAN configurations
–
Program files and Data files are stored on a file server
before execution
Stored
on the
File
Server
Client PC
File Server
15
File Server Program Access

For execution,
–
–
–
Program and data files are downloaded (copied) to the
Client PC
Processing on the client PC, not on the file server
File server merely stores programs and data files
Downloaded to
Client PC,
Executed There
Client PC
File Server
16
File Server Program Access

PC processing power limits FSPA programs
–
–
Client PCs do not get very large
Only programs small enough to operate on limited
client PCs can be used
Executed on the
Client PC
Client PC
File Server
Comparing FSPA, Client/Server, and
Terminal-to-mainframe
File Server Program
Access
•
Location of
processing
•
•
Graphics
•
•
Client/Server
Processing
17
Terminal–tomainframe
•
Client computer
and Server (2
programs)
•
Mainframe
(terminals are
dumb)
Very good because of
local processing in
client PC
•
Very good
because of local
processing in
client PC
•
Poor because rich
graphics would
require expensive
high-speed
network traffic.
Response
Times
•
Very good because
of local processing
on client PC
•
Very good
because of local
process in client
PC, although
some server delay.
•
Poor because
mainframes often
are overloaded.
Scalability
•
Low: Client PCs do
not get very large.
•
High: Upgrade the
server.
•
Very high:
Mainframes get
very large
Client PC (not on
the file server)
Comparing Distributed Processing
Alternatives (Continued)
File Server Program
Access
•
•
Platform
independent?
No. For PCs only
Client/Server
Processing
•
Yes. Client and
server machines
may be of any
platform type.
The two
machines may
be of different
platform types
18
Terminal–tomainframe
•
No. For
terminals and
mainframes only
Summary Questions
1.
What kind of application might use: (a) a
terminal-to-mainframe configuration, (b) a
microcomputer-to-mainframe configuration, (c)
client/server processing ?
2.
Distinguish among Terminal–to-mainframe, File
Server Program Access, and Client/Server
processing in terms of where processing is done
19
Summary Questions (cont.)

20
Which of the following may involve using a
Terminal-to-Mainframe configuration?
a)
b)
c)
You are surfing the Web at home using a dial-up
connection to the Internet
You are downloading files located on a computer in
your organization’s LAN using your laptop computer
from home.
The airline company clerk is booking for a flight
ticket for a customer.
Summary Questions (cont.)

21
Which of the following processing techniques is
commonly used in schools’ LANs to provide
software programs to students in computer labs?
a)
b)
Client/server processing
File Server Program Access
Other slides
23
Client/Server processing
Client PC
Client PC
Client PC
Client PC
Client PC
Server Does Heavy Processing Work: database retrieval, central security, etc.
Client PCs do lighter work: creating requests, displaying responses
Peer-to-Peer (P2P) network configuration
Request
Response
Request
Client PC
Response
Client PC
No dedicated server: PCs are equal, i.e. peers
Any computer can be client and server
24
25
P2P Applications

Direct service, although some P2P systems use
facilitating servers for some of the work
Peer
Peer
Peer
Peer
Peer
Peer
26
P2P network configuration w/ facilitating server
File List
Index Server
1.
Uploads List
of Available Files
When Connects
2.
Search Query
List of
Available
Files
From All
Current Clients
3.
Response
Client PC
4.
P2P file
Download
Client PC
Napster-like P2P file sharing
Client PC
27
Microcomputer-to-Internet configuration

Accessing the Internet using
–
–
–
–

A modem and a dial-up telephone service
ISDN (Integrated Services Digital Network)
DSL (Digital Subscriber Line)
Cable Modems
Internet only “talk” TCP/IP
–
Microcomputers need to use Software that support
TCP/IP
28
Microcomputer-to-Internet configuration
29
Microcomputer-to-Internet configuration
ISDN
30
Microcomputer-to-Internet configuration
DSL
31
Microcomputer-to-Internet configuration
Cable Modem
LAN-to-LAN configuration

Using bridges to connect distinct LANs

Connecting LANs make it possible to share software and peripherals
among LANs

Examples: Schools or Businesses with multiple LANs
32
LAN-to-WAN configuration

Using routers to connect LANs to WANs

Routers more elaborate devices compared to bridges


More computing capabilities needed to convert data from a LAN into data bound
for a WAN
Examples: School or Business connecting to Internet or external database
service
33