iEDS-3010 - Atech OEM

Download Report

Transcript iEDS-3010 - Atech OEM

AtechOEM Inc.
Complete the Connectivity
for M2M
Link & Power up Your Life !!
Why choose Atech for M2M Solution ?
• We provide the hardware solution for PAN, LAN,
WAN
• Fulfill the various network requirements :
Bluetooth, WiFi, Serial to Ethernet, GPRS, 3G
• Customized Service
• Robust designed product for ruggedized
environment
Link & Power up Your Life !!
2016/4/11
2
Atech Solution for M2M Application
Serial Network
RS-232/422/485
Link & Power up Your Life !!
2016/4/11
3
Link & Power up Your Life !!
2016/4/11
4
iWEM-1000 Ultra Low Power WiFi
Module
• Ultra low power consumption, fully stand-alone,
802.11b/g WiFi to UART adapter module.
• Complete WLAN client with UART, GPIO and
sensor interface
• Compact SMD stamp form factor like other
Atech Bluetooth modules
• Fully compatible with standard WLAN APs of
any brand
• Supports infrastructure or Ad-Hoc mode
• Can work with or without a host processor
• Flexible choice of RF antennas: UFL, SMA
connector and chip antenna
Link & Power up Your Life !!
2016/4/11
5
Dual Radio Wireless Mesh Access Point - 525C3
Multiple Radios
 802.11b/g/a for AP and Bridge
Operational Modes:
Access Point
Wireless Bridge or Repeater
AES/WPA/WEP Hardware Encryption
Adjustable 8 level Tx power support
Optimum Channel Selection support
Typical Application:
- Outdoor hotspot or WLAN
without fixed WAN
connection where multiple
service levels (VLAN) is
required
- Wireless bridge link for
wireless application such as
video where users need
multiple service levels (VLAN)
802.1Q VLAN support
Wireless Client load balancing support
Site survey and Diagnostic tool support
Rogue AP detection with e-mail notification
HTTPS and SNMPv3 Management support
Operation Temperature: -30C ~ +70 C
Auto-Forming, Self-healing Mesh
 Up to 40 nodes
Link & Power up Your Life !!
2016/4/11
6
Single Radio Wireless Mesh Access Point
523C (Outdoor) /523E (Indoor)
RS-232 serial port with IP based or MAC based serial
port server for remote access
Typical applications:
• Mesh network without AP
coverage
• Economical alternative for 525
dual radio models
• P2P and P2MP broadband
connection
• Instant wireless Ethernet with
Mesh technologies
• High performance CPE
• Mobile Devices
Operation Mode:
 Mesh (Auto Bridge)
 Access Point
 Wireless Bridge or Repeater
 Client
Single RF:
 802.11a/b/g for AP and Bridge
 Turbo A and Super G provide up to 108Mbps
AES/WPA2/WPA/WEP Data Encryption support
Wireless Mesh Network support
Better reliability / Better flexibility
HTTPS and SNMPv3 Management support
Power Over Ethernet support (24V)
Link & Power up Your Life !!
2016/4/11
7
iEDS-3010/3020/3040
Ethernet Serial Device Server
Introduction
·Providing reliable communication between RS232/422/485
serial devices and an Ethernet LAN/WANCan be configured as
TCP Client/Server or UDP and operates in three modes: Direct
IP Mode, Virtual COM Mode, and Paired Mode
Features
• supports 10/100 Mbps Ethernet
• suports LAN and WAN communications
• management access password protected
• supports up to 8 TCP connection in TCP server mode
• in server mode supports individual client sessions for security
• Heart beat connection ensures reliable TCP connection against
power failure or network disruption.
• supports loop back mode, data is echoed back for easy testing
• Virtual COM drivers for Windows NT/98/ME/2000/XP
• Supports socket connection, TCP server, TCP client, and UDP
• supports SNMP Get and Set function
Link & Power up Your Life !!
2016/4/11
8
iEDS-3010/3020/3040
Specification
•
•
•
•
•
•
•
•
•
•
•
Serial Buffer:output: 64K bytes for
ESport-101/102/111/112
Input: 8K bytes per port
Serial Connection:DTE – BD-9 male
LAN:10/100 Mbps Auto-detecting – 10
Base T, 100 Base TX
Serial Interfaces:RS-232 - TX, RX, RTS,
CTS, DTR, DSR, DCD, GND
RS-422 – TX+, TX-, RX+, RX-, RTS+,
RTS-, CTS+, CTS-, GND
RS-485 - Data +, Data –, GND
Data Rate:110 bps to 230.4 k bps
Parity:none, even, odd, mark, space
Data Bits:5, 6, 7 or 8
Stop Bits:1, 1.5 or 2
•
•
•
•
•
•
•
•
Protocol:TCP, IP, ARP, DHCP, Telnet,
HTTP, UDP, ICMP
Management:Manager software, Serial
Console, Telnet, Web server Firmware
upgradeable
Dimensions:
iEDS-3010/3020:
3.35 x 4.5 x 0.90in (8.5 x 11.5 x 2.3cm)
iEDS-3040:
4.5 x 7.3 x 1.1in (11.4 x 18.5 x 2.9cm)
Power Requirements:
9 ~15 VDC 500 mA
Operating Temperature:0 to 60 °C (32 to
140 °F)
Storage Temperature:-20 to 60 °C (-4 to
140 °F)
Humidity:0 – 90% Non-Condensing
Approvals:CE, FCC
Link & Power up Your Life !!
2016/4/11
9
iEMS-3010
Ethernet Modbus Device Server
Introduction
supports reliable communication between RS232/422/485 networks and IP
networks featuring Modbus protocol. The Modbus protocol will be passed
between TCP/IP based networks and Modbus serial line specification
RTU/ASCII.Can be configured as TCP Client/Server or UDP and operates in
three modes: Direct IP Mode, Virtual COM Mode, and Paired Mode.
Features
• supports 10/100 Mbps Ethernet
• suports LAN and WAN communications
• management access password protected
• supports up to 8 Modbus TCP master to Modbus RTU/ASCII. Queries from
different masters are pipelined and handled independently without disrupting
each other.
• supports Modbus RTU/ASCII master to link up to 8 Modbus TCP clients
• supports inactive timeout to shutdown connection, which frees up the port for
accepting the next connection
• supports loop back mode, data is echoed back for easy testing
• supports SNMP Get and Set function
Link & Power up Your Life !!
2016/4/11
10
iEMS-3010
Specification
•
•
•
•
•
•
•
•
•
•
•
Serial Buffer:output: 64K bytes
Input: 8K bytes per port
Serial Connection:DTE – BD-9
male
LAN:10/100 Mbps Auto-detecting –
10 Base T, 100 Base TX
Serial Interfaces:RS-232 - TX, RX,
RTS, CTS, DTR, DSR, DCD, GND
RS-422 – TX+, TX-, RX+, RX-,
RTS+, RTS-, CTS+, CTS-, GND
RS-485 - Data +, Data –, GND
Data Rate:110 bps to 230.4 k bps
Parity:none, even, odd, mark,
space
Data Bits:5, 6, 7 or 8
Stop Bits:1, 1.5 or 2
•
•
•
•
•
•
•
•
Protocol:TCP, IP, ARP, DHCP, Telnet,
HTTP, UDP, ICMP
Management:Manager software, Serial
Console, Telnet, Web server Firmware
upgradeable
Dimensions: 3.35 x 4.5 x 0.90in (8.5 x
11.5 x 2.3cm)
Power Requirements:
9 ~15 VDC 500 mA
Operating Temperature:0 to 60 °C (32 to
140 °F)
Storage Temperature:-20 to 60 °C (-4 to
140 °F)
Humidity:0 – 90% Non-Condensing
Approvals:CE, FCC
Link & Power up Your Life !!
2016/4/11
11
Model Comparison
Serial Port 1
Serial Port 2
Serial Port 3/4
-
-
iEDS-3010
RS232/422/485
iEDS-3020
RS422/485
RS422/485
iEDS-3040
RS232/422/485
RS232/422/485
iEMS-3010
RS232/422/485
-
Link & Power up Your Life !!
RS232/422/485
-
2016/4/11
12
AX4 Series Bluetooth/Combo AP
Bluetooth/WiFi/3G/GPRS AP
Access Server AX4 is a powerful Linux based wireless connectivity platform
targeted for eHealth, point-of-sale, proximity marketing, captive portal, and long
range Bluetooth connectivity applications. The AX4 integrates three high
performance Bluetooth class 1 radios, 802.11b/g radio and optional 2G or 3G
modem
Key Features
•Built-in applications
•Embedded Linux™ Operating System
•Bluetooth marketing
•ARM9 processor
•Captive portal
•128MB RAM
•eHealth
•1GB Flash
•Bluetooth connectivity
•Connectivity options
•Bluetooth® 2.1 + EDR class 1
•High performance – 1000+ meter ranger
•Range to class 2 Bluetooth devices – 60+ meters
•801.11 b/g – client and access point mode
•Optional GPRS/EDGE or 3G modem (Bluetooth/WiFi Access Server.
Bluetooth/WiFi with 3G modem, Bluetooth/WiFi with GPRS modem)
•10/100Mbps Ethernet with Power-over-Ethernet
Link & Power up Your Life !!
2016/4/11
13
~ Thank You ~
Link & Power up Your Life !!
2016/4/11
14