Transcript Set Wireless IP for ECC Local Server (Hardware)

* * * Updated for NTS software version 4.1.30, 2011-07-01 * * *
1
Part 2a:
Local Server
Configuration and Set-up
Note: All NTS logins are held by your local NTS administrator,
contact them for the user names and passwords
(anything labeled “Entry #1”, “Entry #2”, “Entry #3”, etc.)
2
Setting Up Local Server
Note: “Administrator” access required to perform this task.
1. When “warning
banner” appears, on
keyboard, press and
hold Shift then Enter.
The NTS Log-in pops
up.
2. Put Entry #1 for
“user name” and
Entry #2 for the
“password” (get
from NTS admin)
3. Select OK.
3
Setting Up Local Server
Note: “Administrator” access required to perform this task.
4. On the next popup, select OK.
Note: May take 2 or 3
minutes to pop-up
4
Setting Up Local Server
Note: “Administrator” access required to perform this task.
5. In the Encryption
Plus pop-up put
Entry #3 for “user
name” (enter twice)
and Entry #4 for
“password” (enter
twice).
6. Select Next
5
Setting Up Local Server
Note: “Administrator” access required to perform this task.
7. Select Next
8. Select Hide on final
Encryption pop-up.
9. Restart Computer
6
Setting Up Local Server
Note: “Administrator” access required to perform this task.
After laptop restarts…the screen below appears.
THEN…
7
Setting Up Local Server
Note: “Administrator” access required to perform this task.
Next screen appears
Put Entry #3 for
“user name”
Put Entry #4 for
“password”
Press Enter
on keyboard.
8
Setting Up Local Server
Note: “Administrator” access required to perform this task.
1. When “warning
banner” appears, on
keyboard, press and
hold Shift then Enter.
The NTS Log-in pops
up.
2. Put Entry #1 for
“user name” and
Entry #2 for the
“password” (get
from NTS admin)
3. Select OK.
9
Set Wireless IP for ECC Local
Server (Hardware)
2.
3.
5.
Click
4.
Right Click
1.
Select
10
Set Wireless IP for ECC Local
Server (Hardware)
6.
Select
7.
Select
New Pop-up
11
Set Wireless IP for ECC Local
Area Network (Hardware)
Note: Local Server and Registration
All of the Notebook Computers must have an
identical Wireless IP Address except for last
digit set.
IP Address series below is an example for site
operating with 1 Local Server and 4 Registration
Workstations.
Local Server:
Registration Workstation
Registration Workstation
Registration Workstation
Registration Workstation
1:
2:
3:
4:
10.2.2.1
10.2.2.2
10.2.2.3
10.2.2.4
10.2.2.5
12
Set Wireless IP for ECC Local
Area Network (Hardware)
Note: Local Server and Registration
IP Address series below is an example for a site
operating with 2 Local Server and 2 Registration
Workstations each:
Local Server 1:
10.2.2.1
Registration Workstation 1: 10.2.2.2
Registration Workstation 2: 10.2.2.3
Local server 2:
10.3.3.1
Registration Workstation 3: 10.3.3.2
Registration Workstation 4: 10.3.3.2
Note: Ensure Server separation distance 100ft min.
13
Set Wireless IP for ECC Local
Server (Hardware)
.2, .3, etc
Type in
10 .
2.
2.
1
255 .
255
.
255 for
.
0
Remains
same
all
Select
14
Set Wireless IP for ECC Local
Server (Hardware)
The next screen appears.
Select
Close
Cancel
Wireless is now connected.
15