Transcript wireless-mod6-Bridges

Ch. 6 - Bridges
Cisco Fundamentals of Wireless LANs version 1.1
Rick Graziani
Cabrillo College
Overview
802.11a
• Designed to connect two or more networks, typically located in different
buildings, wireless bridges deliver high data rates and superior
throughput for data-intensive, line-of-sight applications.
• The bridges connect hard-to-wire sites, noncontiguous floors, satellite
offices, school or corporate campus settings, temporary networks, and
warehouses.
• The high-speed links between the wireless bridges deliver throughput
many times faster than E1/T1 lines for a fraction of the cost, thus
eliminating the need for expensive leased lines or difficult-to-install
cable.
Rick fiber-optic
Graziani [email protected]
2
Bridge Connection
Bridging Defined
• Bridges are used
to connect two or
more wired LAN’s,
usually located
within separate
buildings, to create
one large LAN.
Rick Graziani [email protected]
4
Technology Comparisons
Technology
Installation
Cost
Monthly
Cost (USD)
Barriers to
Implement
Dialup or
56K
$0 to $250
$25 to $50
Remote
locations
Cable/DSL
$0 to $250+
$25 to $150
Reliability
E1, T1
$250 to $1,000+
$400
to $1000+
Recurring
Cost
Availability
Fiber
$5,000 to
$200,000+
$0
Physical
obstructions
Microwave
$15,000+
$0
Licensing,
Weather
$2,000 to
$15,000
$0
Interference
802.11
Rick Graziani [email protected]
Traditional WAN Connectivity
Monthly Leased Line OpEx
2 DS1:
RBOC
DS1
$600
1 DS3: $5000
TOTAL: $5600
DS1
DS3
New remote office
RBOC provides guaranteed
level of service via a
Service Level Agreement
(SLA)
- No DS1 connection
available
Rick Graziani [email protected]
6
802.11b Connectivity
Monthly Line Cost
2 DS1:
RBOC
$600
1 Fractional DS3: $3000
2 Mbps
TOTAL: $3600
2 Mbps
22 Mbps
Wireless Installation Cost
7 350 Series Bridges Installed:
$12,500 USD
Pay Back Period: 3 months
5 Mbps
New building connected
Self managed
Rick Graziani [email protected]
7
802.11a Connectivity
Monthly Line Cost
2 DS1:
RBOC
$600
1 DS3: $5000
14 Mbps
TOTAL: $5600
14 Mbps
50 Mbps
Wireless Installation Cost
7 1400 Series Bridges Installed:
$40,000 USD
Pay Back Period: 8 months
27 Mbps
New building connected
Self managed
Rick Graziani [email protected]
8
Role in Radio Network
• Role in Radio Network
– Determines
functionality within
WLAN
– Determines which
type of clients will be
supported
File
Server
Workgroup
Bridge
Bridge
Access Point
PCI Card
Rick Graziani [email protected]
Bridge
PC Card
9
Introduction
•
The BR350 is sometimes called the multifunction bridge.
Rick Graziani [email protected]
10
Bridges
• Cisco bridges can be
•
controlled and configured
though command line and
Web interfaces.
Management can also be
done through traditional
protocols like SNMP.
Rick Graziani [email protected]
11
Bridge roles in the network
•
•
The Cisco bridges can be configured to operate in different modes.
The BR350, or multifunction bridge, has the same receiver sensitivity, power
levels, and capabilities, as the Cisco Aironet APs with .11b radio chips.
Rick Graziani [email protected]
12
Parent-Child Relationship: Root - Non-Root
Rick Graziani [email protected]
13
Bridge roles in the network
Root Access Point
• Root Access Point—Use this setting to set up the bridge as a rugged
access point connected to the wired LAN. When you select Access
Point, the bridge's Spanning Tree Protocol (STP) function is disabled.
Rick Graziani [email protected]
14
Bridge roles in the network
Root Bridge
• Root bridge—One bridge in each group of bridges must be set as the
root bridge. A root bridge can only communicate with non-root
bridges and other client devices and cannot associate with another
root bridge.
Rick Graziani [email protected]
15
Bridge roles in the network
Non-Root Bridge with
Clients
• Non-Root Bridge w/Clients—Use this setting for non-root bridges that
will accept associations from client devices, and for bridges acting as
repeaters. Non-root bridges can communicate with other non-root
bridges, root bridges, and client devices.
Rick Graziani [email protected]
16
Bridge roles in the network
Non-Root Bridge
without Clients
• Non-Root Bridge w/o Clients—Use this setting for non-root bridges
that should not accept associations from client devices. A bridge set to
Non-Root Bridge w/o Clients will only communicate with a root or
non-root bridge.
Rick Graziani [email protected]
17
Bridge roles in the network
Repeater Access Point
• Repeater Access Point—Use this setting to set up the bridge as a
rugged repeater access point. A repeater access point is not connected
to the wired LAN; it is placed within radio range of an access point
connected to the wired LAN to extend the range of your
infrastructure or to overcome an obstacle that blocks radio
communication. When you select Repeater Access Point, the bridge's
STP function is disabled.
Rick Graziani [email protected]
18
Power Options
Rick Graziani [email protected]
19
Distances Limited by
802.11 Specification
Rick Graziani [email protected]
20
BR350—Front Cover LED’s
Rick Graziani [email protected]
21
802.11b Bridge
Bridge Model
Data
Rate
Max. Distance
Miles
BR350
Optional
Antenna
Standard Cable
(6.7 dB/100 ft. loss)
(6.7 dB/30.5 m)
Km
11 Mbps
20.5
33.0
21 dBi Dish
50 ft (15.2m)/side
11 Mbps
32.7
52.5
21 dBi Dish
20 ft (6.1m)/side
5.5 Mbps
32.6
52.4
21 dBi Dish
50 ft (15.2m)/side
2 Mbps
41.0
66.0
21 dBi Dish
50 ft (15.2m)/side
1 Mbps
51.7
83.2
21 dBi Dish
50 ft (15.2m)/side
Note: Distances over 25 miles or 40 Km are very hard to align and install!
Rick Graziani [email protected]
802.11b Common Questions
Cisco Aironet Bridge
How Fast?
Max data rate
11 Mbps
2 Mbps
Typical throughput
5.5 Mbps
1.4 Mbps
How Far?
Yagi antenna
Dish antenna
3.6 Miles
5.8 Km
20.5 Miles
33 Km
7.3 miles
11.7 Km
25+ miles
40+ Km
Note: All distances may be limited by governing bodies and standards.
Rick Graziani [email protected]
Optional 2.4GHz Antennas for Long Range
• 13.5 dBi Yagi
Distances over
7.3 miles @ 2 Mbps
11.7 Km @ 2 Mbps
3.6 miles @ 11 Mbps
5.8 Km @ 11 Mbps
• 21 dBi Solid Dish
For distances up to
25+ miles @ 2 Mbps
40+ Km @ 2 Mbps
20.5 miles @ 11 Mbps
33 Km @ 11 Mbps
Note: Distances include 50 feet of low loss cable and 10 dB fade margin
Rick Graziani [email protected]
802.11b Bridge Application: School District
Richardson
Elementary
Yagi
Bode
Elementary
Yagi
WeaverRoberts
Special
Middle School
Education
Dish
Dish
High School 2
Bridges
One 12 dBi omni
One Dish
Channel #1
Channel #6
Channel #11
Rick Graziani [email protected]
Price
Elementary
Yagi
UNIVERSITY
Administration
2 Bridges
One 12 dBi omni
One Yagi
Lincoln
Elementary
Yagi
Bolich
Dewitt Elementary Middle
School
Yagi
Yagi
Lightning
Rick Graziani [email protected]
26
Lightning Arrestor
To Antenna
•
•
Designed to protect LAN
devices from static
electricity and lightning
surges that travel on coax
transmission lines
RP-TNC connectors used
on all Cisco Antennas
Lug
Lockwasher
Nut
Ground Wire
From RF Device
Rick Graziani [email protected]
Direct Strike Protection
Rick Graziani [email protected]
28
Coax Connection Sealing
•
•
•
Number one problems with
bridges - water in the
connectors
Proper sealing
is important
Coax Seal is one product
that is inexpensive and
works great
Rick Graziani [email protected]
29
Path Loss Considerations
The following are needed to
determine coverage
·
Antenna Gain
·
Transmitter Power
·
Receiver Performance
·
Cable Losses
·
Environmental Structures
Rick Graziani [email protected]
Calculations of Coverage Performance
Coax Length
100 ft (30.5 m)?
Towers needed to
clear trees and
other buildings
Coax Length
150 ft (45.7)?
Wants 11 Mbps data rate
Distance = 13 miles (20.9 Km)
Rick Graziani [email protected]
LED indicators
• When the bridge is powering on, all three LEDs normally blink.
• After bootup, the colors of the LEDs represent the following:
– Green LEDs indicate normal activity.
– Amber LEDs indicate errors or warnings.
– Red LEDs mean the unit is not operating correctly or is being
upgraded.
Rick Graziani [email protected]
32
Connecting to the Bridge
• There are 3 basic GUI interfaces depending on the bridge image:
– IOS 1400
– VxWorks BR350
– SOS WGB350
Rick Graziani [email protected]
33
1400 with IOS GUI
Rick Graziani [email protected]
34
BR350 with VxWorks GUI
Rick Graziani [email protected]
35
WGB350 with SOS GUI ad SOS Menu
Rick Graziani [email protected]
36
Resetting the Bridge
• Resetting the Cisco bridges depends on the model.
• The BR350, can be reset via the console, telnet, or browser
•
connection.
– If the password is unknown, then the console reset method is
required.
– The console port on the BR350.
– The :resetall command can be used after rebooting the bridge,
however the command must be entered within 2 minutes of
rebooting.
The 350 Series Workgroup Bridge or the 1400 series bridge can be
reset to default values via the Reset button, telnet, or browser
connection.
Rick Graziani [email protected]
37
Default Settings for BR350 and 1400
Rick Graziani [email protected]
38
Default Settings for WGB 350
Rick Graziani [email protected]
39
Basic Configuration
Will will not use or discuss all of the configuration
options and features.
BR350 Home Page (Summary Status)
Rick Graziani [email protected]
41
BR350 Map Link
• The Map link opens the Map window, which contains links to every
•
management page.
The Map window can be used to jump quickly to any system
management page, or to a map of the entire wireless network
Rick Graziani [email protected]
42
BR350 Network Link
Rick Graziani [email protected]
43
BR350 Associations Link
Rick Graziani [email protected]
44
BR350 Setup Link
• The Setup link displays the Setup page, which contains links to the
management pages with configuration settings.
Rick Graziani [email protected]
45
BR350 Logs Link
Rick Graziani [email protected]
46
BR350 - Basic Configuration
•
•
Connect just like an AP, suggest wired GUI.
Remember to set the IP address on your Ethernet NIC.
Rick Graziani [email protected]
47
Root Bridge and Non-Root Bridges
Rick Graziani [email protected]
48
Non-Root Bridge without Clients
Repeater Bridge
Rick Graziani [email protected]
49
Bridge as Root Access Point
Rick Graziani [email protected]
50
Bridge as Repeater Access Point
Rick Graziani [email protected]
51
Root Radio Identification configuration
•
•
The current IP subnet mask displayed under the setting shows the IP subnet
mask currently assigned to the bridge. This is the same subnet mask as the
default subnet mask unless DHCP or BOOTP is enabled. If DHCP or BOOTP
is enabled, this is the subnet mask used by the DHCP or BOOTP server.
You can also enter this setting on the Express Setup page.
Rick Graziani [email protected]
52
Root Radio Identification Page
• Primary Port Settings: Two options allow for the designation of the
radio port as the primary port on the bridge:
• Primary Port? The primary port determines the MAC and IP
addresses of the bridge.
– The default primary port of the bridge is the Ethernet port.
– The Ethernet port is connected to the wired LAN, so this setting is
usually set to no.
– Select no to set the Ethernet port as the primary port.
– Select yes to set the radio port as the primary port.
• Adopt Primary Port Identity?
– Select yes, to adopt the primary port MAC and IP addresses for the
radio port.
– Select no to use different MAC and IP addresses for the radio port.
Bridges acting as root units adopt the primary port settings for the
radio port.
• When putting a bridge in standby mode, select no for this
Rick Graziani [email protected]
53
setting.
Root Radio Hardware configuration
• Similar to an AP.
Rick Graziani [email protected]
54
Root Radio Hardware configuration
Rick Graziani [email protected]
55
Ethernet Identification configuration
• Addressing is similar to Root Radio options
Rick Graziani [email protected]
56
Ethernet Hardware configuration
Rick Graziani [email protected]
57
Ethernet Hardware configuration
Rick Graziani [email protected]
58
Configuring time services
Rick Graziani [email protected]
59
Configuring boot services
Rick Graziani [email protected]
60
Configuring name services
Rick Graziani [email protected]
61
Configuring routing services
Rick Graziani [email protected]
62
Configuring routing services
•
•
•
•
Manage Installation Keys is used to read specifications of the software license
and to install a new license.
Manage System Configuration is used to restart the device, download a
configuration file, or reset settings to factory defaults.
Distribute Configuration to other Cisco Devices is used to send the
configuration of the device to other Cisco Aironet devices on the network.
Distribute Firmware to other Cisco Devices is used to send a new firmware
version to other Cisco Aironet devices on the network.
Rick Graziani [email protected]
63
CDP
Rick Graziani [email protected]
64
Distribute Firmware to Other Cisco Devices
Rick Graziani [email protected]
65
Hot Standby Management
Rick Graziani [email protected]
66
1400 Series Bridge
801.11a wireless bridge
Overview
• The Cisco Aironet 1400 Series Wireless Bridge is a high-performance
•
801.11a wireless bridge designed to connect multiple LANs in a
metropolitan area.
Designed to be a cost-effective alternative to leased lines, it is
engineered specifically for harsh outdoor environments . The features
of the 1400 include:
Rick Graziani [email protected]
68
Overview
•
•
•
•
•
Support for both point-to-point or point-to-multipoint configurations
Support data rates up to 54 Mbps
Enhanced security mechanisms based on 802.11i standards
Rugged enclosure optimized for harsh outdoor environments with
extended operating temperature range
Integrated or optional external antennas for flexibility in deployment
Rick Graziani [email protected]
69
Overview
• Data rates of 54 Mbps can be enabled for point-to-point links up to 7.5
•
•
miles, and for point-to-multipoint links up to 2 miles.
Aggregate throughput can be obtained in excess of 28 Mbps.
Also, by using higher gain antennas or lower data rates, ranges in
excess of 20 miles point-to-point can be covered.
Rick Graziani [email protected]
70
Models and options
• There are two options for ordering the Cisco Aironet 1400 Series
Wireless Bridge:
– Cisco Aironet 1410 Wireless Bridge with 22.5 dBi Antenna, FCC
Config
– Cisco Aironet 1410 Wireless Bridge with N-Type Connector, FCC
Config
Rick Graziani [email protected]
71
Models and options
Rick Graziani [email protected]
72
Components and accessories
Cisco Aironet Power Injector
Mounting Kit
Rick Graziani [email protected]
73
IOS features
Rick Graziani [email protected]
74
802.11a Bridge
Bridge Model
Data
Rate
Max. Distance
Miles
1400
Optional
Antenna
Km
54 Mbps
12
xx.0
28 dBi Dish
9 Mbps
23
xx
28 dBi Dish
54 Mbps
7.5
xx
22 dBi Int.
16 Mbps
9
xx
22 dBi Int.
Note: Distances over 25 miles or 40 Km are very hard to align and install!
Rick Graziani [email protected]
Optional 5GHz Antennas for Long Range
•
9.5 dBi sector (H or V
polarization)
•
•
•
•
9 dBi omni (Vertical
polarization)
•
•
•
Rick Graziani [email protected]
Network configurations
–Point to point
–Point to multi-point
Roof, pole, and wall
mounting options
5.8 GHz Unlicensed
Band Operation
–Rapid deployment
and re-commissioning
Operating temp range: 30 to +55 oC
Humidity: 0 to 100%
28 dBi dish (H or V
polarization)
76
Bridge Range Calculation Utility
Rick Graziani [email protected]
Bridge Distance Calculations (cont.)
Rick Graziani [email protected]
78
Bridge Distance Calculations (cont.)
Rick Graziani [email protected]
79
Ch. 6 - Bridges
Cisco Fundamentals of Wireless LANs version 1.1
Rick Graziani
Cabrillo College