Transcript Performance Management (Best Practices)

Performance Management
(Best Practices)
REF:www.cisco.com
Document ID 15115
Introduction
• Performance Management involves
optimization of network response time and
management of consistency and quality of
individual and overall network services
– Need to measure the user/application
response time
Performance management issues
•
•
•
•
User performance
Application performance
Capacity planning
Proactive fault management
• It is important to note that with newer
application like video and voice performance
management is the key success
Critical success factors (1/2)
• Gather a baseline for both network and
application data
• Perform a what-if analysis on network and
application
• Perform exception reporting for capacity
issues
• Determine the network management
overhead for all proposed or potential
network management services
Critical success factors (2/2)
• Analyze the capacity information
• Periodically review capacity information for
both network and applications as well as
baselining and exception
• Have upgrade or tuning procedures set up
to handle capacity issues on both a
reactive and long-term basis
Performance management process
flow (1/3)
Develop a network management
concept of operation
Measure Performance
Perform a Proactive Fault Analysis
Performance management process
flow (1/3)
• 1 develop a network management concept
of operation
– Define the required features : Services,
Scalability and Availability objectives
– Define availability and network management
objectives
– Define performance SLAs and Metrics
– Define SLA
Performance management process
flow (2/3)
• 2 Measure Performance
– Gather network baseline data
– Measure availability
– Measure response time
– Measure accuracy
– Measure utilization
– Capacity planning
Performance management process
flow (3/3)
• 3 perform a proactive fault analysis
– Use threshold for proactive fault management
– Network management implementation
– Network operation metrics
Performance management process
flow
Develop a network management
concept of operation
Measure Performance
Perform a Proactive Fault Analysis
Develop a network management
concept of operation (1/3)
• The purpose is to describe the overall
desired system characteristics from an
operational standpoint
• The use of this document is to coordinate
the overall business goals of network
operation, engineering, design other
business units and the end users.
Define the required features: Services,
Scalability objectives (1/2)
• Define services :to understand applications,
basic traffic flows, users and site counts and
require network services (create model of
your network)
• Create solution scalability objectives: to help
network engineers design networks that
meet future growth requirement and not
experience resource constraint.
– media capacity, number of routes and etc
Define the required features: Services,
Scalability objectives (2/2)
• These are the standard performance
goals:
– Response time
– Utilization
– Throughput
– Capacity (maximum throughput rate)
Define availability and network
management objectives (1/2)
• Availability objectives define the level of
services (service level requirements)
– define different class of service for a particular
organization
– Higher availability objective might necessitate
increased redundancy and support procedures
Define availability and network
management objectives (2/2)
• Define manageability objectives to ensure
that overall network management does
not lack management functionality
– Must understand the process and tools for
organization
– Uncover all important MIB or network tool
information
Define performance SLAs and
Metrics
• The performance SLAs should include the
average expected volume of traffic, peak
volume of traffic, average response time
and maximum response time allowed
Define SLAs
• SLA (Service Level Agreement) - enterprise
• SLM (Service Level Management) – service provider
• SLM include definitions for problem types and
severity and help desk responsibilities
– Escalation path, time before escalation at each tier
support level
– Time to start work on the problem
– Time to close target based on priority
– Service to provide in the area of capacity planning,
hardware replacement
Performance management process
flow
Develop a network management
concept of operation
Measure Performance
Perform a Proactive Fault Analysis
Measure Performance
• Gather Network Baseline data
– Perform a baseline of the network before and
after a new solution deployment
– A typical router/switch baseline report
includes capacity issues related to CPU,
memory, buffer, link/media utilization,
throughput
– Application baseline: bandwidth used by app
per time period
Measure availability
• Availability is the the measure of time for
which a network system or application is
available to a user
– Coordinate the help desk phone calls with the
statistics collected from managed devices
– Check scheduled outages
– Etc
Measure Response Time
• Network response time is the time required to
•
•
•
travel between two points
Simple level – pings from the network management
station to key points I the network. (not accuracy)
Server-centric polling : SAA (Service Assurance
Agent) on router (Cisco) to measure response time
to a destination device
Generate traffic that resembles the particular
application or technology of interest
Measure accuracy
• Accuracy is the measure of interface traffic
that does not result in error and can be
expressed in term of percentage
• Accuracy = 100 – error rate
• Error rate = ifInErrors * 100 /
(ifInUcastPkts + IfInNUcastPkts)
Measure Utilization (1)
• Utilization measure the use of a particular
resource over time
• Percentage in which the usage of a
resource is compared with its maximum
operational capacity
• High utilization is not necessarily bad
• Sudden jump in utilization can indicate
unnormal condition
Measure Utilization (2)
• Input utilization =
ifInOctets *8*100/(time in second)*ifSpeed
• Output Utilization
ifOutOctets *8*100/(time in second)*ifSpeed
Capacity planning
• The following are potential areas for
concern:
– CPU
– Backplane or I/O
– Memory
– Interface and pip sizes
– Queuing, latency and jitter
– Speed and distance
– Application characteristics
Performance management process
flow
Develop a network management
concept of operation
Measure Performance
Perform a Proactive Fault Analysis
Perform a Proactive fault analysis
• One method to perform fault management
is through the use of RMON alarms and
event groups
• Distributed management system that
enables polling at a local level with
aggregation of data at a manager to
manager
Use threshold for proactive fault
management (1/2)
• Threshold is the point of interest in specific
data stream and generate event when
threshold is triggered
• 2 classes of threshold for numeric data
– Continuous threshold apply to continuous or
time series data such as data stored in SNMP
counter or gauges
– Discrete threshold apply to enumerated objects
or discrete numeric data such as Boolean
objects
Use threshold for proactive fault
management (2/2)
• 2 different forms of continuous threshold
– Absolute :use with gauges
– Relative (delta): use with counter
• Step to determine threshold
– 1 select the objects
– 2 select the devices and interfaces
– 3 determine the threshold values for each
object or interface
– 4 determine the severity for the event
generated by each threshold
Network management
implementation
• The organization should have an
implemented network management
system.
• SNMP/RMON or other network
management system tools
Network operation metrics (1/2)
• Number of problems that occurs by call
priority
• Minimum, maximum and average time to
close in each priority
• Breakdown of problems by problem type
(hardware, software crash, configuration,
power user error)
Network operation metrics (2/2)
• Breakdown of time to close for each
problem type
• Availability by availability or SLA
• How often you met or missed SLA
requirements
Performance Management
Indicator
Indicators for performance
management (1/3)
• Performance indicators provide mechanism by
•
•
which an organization can measure critical
success factors.
They are the followings:
Document the network management business
objectives
• Create detailed and measurable service level
objectives
Indicators for performance
management (2/3)
• Provide documentation the service level
agreement (SLA) with charts or graphs that show
the success or failure of how these agreements
are met over the time
• Collect a list of the variables for the baseline
such as polling interval, network management
overhead incurred, possible trigger threshold
– whether the variable is used as a trigger for a trap,
and trending analysis used against each variable
Indicators for performance
management (3/3)
• Have a periodic meeting that reviews the analysis
of the baseline and trends.
• Have a what−if analysis methodology documented.
– This should include modeling and verification where
applicable
• When thresholds are exceed, develop
documentation on the methodology used to
increase network resources.
– One item to document is the time line required to put in
additional WAN bandwidth and a cost table
Document the network
management business objectives
(1/3)
• This document is the organization network
management strategy and should
coordinate the overall business goals of
network operations, engineering, design,
other business units and the end users.
• It enable the organization to form the long
range planning activities for network
management and operation.
Document the network
management business objectives
(2/3)
• Identify a comprehensive plan with
achievable goals
• Identify each business service/application
that require network support
• Identify those performance-based metric
needed to measure service
Document the network
management business objectives
(3/3)
• Plan the collection and distribution of the
performance metric
• Identify the support needed for network
evaluation and user feedback
• Have documented, detailed and
measurable SLA objectives
Document the Service Level
Agreements
• Before document the SLA, you must define
the service level objectives metrics
• This document should be available to users
for evaluation to provide feedback for
variables needed to maintain the service
agreement level
• SLAs are living agreement
– What works today might become obsolete
tomorrow
Create a list of variables for the
baseline
• This list includes items such as
– polling interval
– Network management overhead incurred
– Possible trigger thresholds
– Trending analysis used against each variable
– Router health
– Switch health
– Routing information
– Utilization
– delay
Reviews the baseline and trends
• Network management personnel should
conduct meeting periodically (operational
and planning)
• Also include the review of SLA
Document a what-if analysis
methodology
• A what-if analysis involves modeling and
verification of solutions.
• It includes the major questions, the
methodology, data sets and configuration
file
• The main point is that he what-if analysis is
an experiment hat someone else should be
able to recreate with the information
provided in the document
Document the methodology used
to increase network performance
• This document includes additional WAN
•
•
bandwidth and a cost table that helps increase
the bandwidth for a particular type of link
It helps the organization realize how much time
and money it costs to increase the bandwidth
Periodic review this document to ensure that it
remain up to date
Configuration Management
(Best Practice)
Ref.: www.cisco.com
Document ID 15111
High Level process flow for
Configuration Management
Start
Create Standards
Implement Standards
Maintain Documentation
Validate and Audit Standards
NO
Improve ?
YES
Review Standards
Create Standards (1)
• Create Standards helps reduce network
complexity, the amount of unplanned
downtime and exposure to network impact
events
Create Standards (2)
• Following standards for optimal network
consistency
– Software version control and management
– IP addressing standard and management
– Naming convention and Domain Name System/ DHCP
assignment
– Standard Configuration and Descriptors
– Configuration Upgrade procedure
– Solution Templates
Software Version Control and
Management (1)
• Software version control is the practice of
deploying consistent software versions on
similar network devices
• Limit amount of software defects and
interoperability issues
• Reduce the risk of unexpected behavior
– With user interfaces
– Feature behavior / upgrade behavior
Software Version Control and
Management (2)
• Following steps for Software version control
– Determine device classifications based on chassis,
stability and new feature requirements
– Target individual software versions for similar-device
classification
– Test, validate and pilot chosen software versions
– Document successful version as standard for similardevice classification
– Consistently deploy or upgrade all similar devices to
standard software version
IP Address Standards and
Management (1)
• IP address management is the process of
allocating, recycling and documenting IP
address and subnets in a network
• It reduces the opportunity for overlapping
or duplicate subnets, wasted IP address
space, complexity
IP Address Standards and
Management (2)
• We should standard subnet size for standard application
–
–
–
–
Subnet
Subnet
Subnet
Subnet
size
size
size
size
of
of
of
of
building
WAN link
Branch site
Loopback
• The subnet block should promote IP summarization
•
(contiguous IP )
Create standards for IP assignment
– Router should be the first available address
– Switch may be the next available address
– Dynamic address should be followed by fixed address
• Finally document standard you developed and IP allocation
Naming Convention and DNS/DHCP
Assignment (1)
• Consistent, structure use of naming conventions
and DNS for devices helps
– Create a consistent point to routers for all network
management information related to a device
– Reduce the opportunity for duplicate IP address
– Creates simple identification of a device showing
location, device type and purpose
– Improve inventory management by providing a
simpler method to identify network devices
Naming Convention and DNS/DHCP
Assignment (2)
• On router, it is strongly recommended to
use loopback interface as the primary
management interface
• Loopback interface can be used for trap,
SNMP and syslog
• Individual interface can have name
convention that identifies the device,
location, purpose and interface
Naming Convention and DNS/DHCP
Assignment (3)
• It is also recommended to identify DHCP
ranges and adding them to the DNS
including location of the user
• Example: “dhcp-bldg-c21-10” to “dhcpbldg-c21-253” which identifies IP address
in building C, second floor wiring closet 1
Standard Configuration and
Descriptors (1)
• Standard Configuration applies to protocol and
•
•
media configuration as well as global
configuration command
Descriptors are interface commands used to
describe an interface
It is recommended to create standard
configurations for each device classification
– Router , LAN switch, WAN Switch, ATM switch
Standard Configuration and
Descriptors (2)
• Each standard configuration contain the global, media,
•
and protocol configuration command
Global configuration
– Password, vty, banners
– SNMP configuration, Network Time Protocol (NTP)
• Media configuration
– ATM, Frame Relay, Fast Ethernet configuration
• Protocol Configuration
– Routing protocol
– Access control list
– QoS configuration
Standard Configuration and
Descriptors (3)
• Descriptors are developed by creating a
standard format that applies to each
interface
• The descriptor includes
– the purpose and location of the interface
– Other devices and location connected to the
interface
– Circuit identifier
Standard Configuration and
Descriptors (4)
• It is recommended
– to keep standard configuration parameters in a
standard configuration file
– downloading the file to each new device prior to
protocol and interface configuration
• We should document the standard configuration
•
file including an explanation of each global
configuration parameter and why it is important
RME (Cisco Resource Manager Essentials)
Configuration Upgrade Procedure
(1)
• Upgrade procedures ensure that software and
•
hardware upgrades occur smoothly with minimal
downtime
Upgrade procedures include
–
–
–
–
–
vendor verification
Vendor installing references such as release notes
Upgrade methodologies or steps
Configuration guideline
Testing requirement
Solution Templates (1)
• Solution templates are used to define modular
•
•
network solutions
A network module may be a wiring closet, a
WAN field office or an access concentrator
It is used to ensure that similar deployment can
be carried out in exactly the same way
– can reduce risk level to the organization
Solution Templates (2)
• Specific details of the solution template
– Hardware and hardware modules including memory,
flash, power and card layouts
– Logical topology including port assignment
– Software versions including firmware versions
– All non-standard, non-devices specific configuration,
VLAN configuration, access lists, switching paths,
spanning tree parameters and etc
– Out of band management requirement
– Cable requirement
– Installation requirement including environmental, power
and rack location
Maintain Documentation (1)
Start
Create Standards
Implement Standards
Maintain Documentation
Validate and Audit Standards
NO
Improve ?
YES
Review Standards
Maintain Documentation (2)
• It is recommended to use the following
network documentation critical success
factor
– Current device , link and end user inventory
– Configuration version control system
– TACACS (Terminal Access Controller AccessControl System) configuration log
– Network topology documentation
Validate and Audit Standards (1)
Start
Create Standards
Implement Standards
Maintain Documentation
Validate and Audit Standards
NO
Improve ?
YES
Review Standards
Validate and Audit Standards (2)
• We can use configuration management
performance indicators to measure
configuration management success
• Configuration management performance
indicators
– Configuration integrity checks
– Devices, protocol and media audits
– Standards and documentation review
Configuration integrity checks
• It should evaluate the overall configuration
of the network its complexity and
consistency and potential issues
• For cisco network, it is recommended to
use Netsys configuration validating tool.
Device, Protocol and Media Audits
• It is used to check consistency in software
versions, hardware devices and modules,
protocol and media and naming
convention
• Ciscowork RME is a configuration tool that
can audit and report on hardware versions
modules and software versions
Standards and Documentation
review
• It is done to ensure that the information is accurate and up
•
•
to date
The audit should include reviewing current documentation
recommending changes or additions and approving new
standards
Following documents should be reviewed on a quarterly
basis
–
–
–
–
–
–
–
Standard configuration definition
Solution templates including recommended hardware configuration
Current standard software versions
Upgrade procedures for all devices and software version
Topology documentation
Current templates
IP address management