Transcript BOSNST - Openwall

Building Open Source Network Security Tools
Invictus Ferramenta
Mike Schiffman
The RSA Conference, April 2003
Today’s Presentation is an Overview of This:
Agenda
1. Introduction and Overview
2. The Modular Model of Network Security Tools
3. The Component and Technique Layers
4. Network Security Tool Classification
5. Active and Passive Reconnaissance Technique Details
6. Modeling Existing Tools
7. Inside a Network Security Tool: Firewalk Internals
8. Questions and Comments
Primer on Mike Schiffman
• Researcher, Cisco Systems
•
Critical Infrastructure Assurance Group (CIAG), Cisco Systems
• Technical Advisory Board for Qualys, IMG Universal
• Consulting Editor for Wiley & Sons
• R&D, Consulting and Speaking background:
•
Firewalk, Libnet, Libsf, Libradiate, Various whitepapers and reports
•
Done time with: @stake, Guardent, Cambridge Technology Partners, ISS
• Author:
•
Building Open Source Network Security Tools, Wiley & Sons
•
Hacker’s Challenge Book I, Osborne McGraw-Hill
•
Hacker’s Challenge Book II, Osborne McGraw-Hill
Overview
• What you will learn today
•
A new model for conceptualizing and describing network security tools
• How to apply this model to existing tools
• How to use this model to rapidly build new tools
•
Common network security tool techniques and how they are codified
• What you should already know
•
General understanding of the TCP/IP protocol suite
• Primarily layers 1 – 3 (OSI layers 2 – 4)
•
General network security concepts
• For example; the difference between packet sniffing and port scanning
•
The C programming language
Before we start…
• Where should I spend my focus…?
• Lots of material
• Show of hands…
• Libnet
• Libpcap
• The Paradigm and NST terminology
• Code?
Paradigm Overview
Technically Accurate.
Not Tangible.
What is a Network Security Tool?
A network security tool is an algorithmic implement that is
esigned to probe, assess,
or increase
the overall safety of or mitigate
We need
something
risk associated withbetter…
an entity across a communications medium.
(there is something better)
Unwieldy.
Too Clinical.
A (New) Paradigm
• Functional
• Tangible and Visual
• Specifies a simple taxonomy for grouping and ordering
tools
• Tool Classifications
• Separates a network security tool into three layers or tiers
• Component, Technique, Control
• Hierarchical dependencies
• An object at a higher layer has dependencies on one or more
objects below it
The Modular Model of Network Security
Tools
denotes layer dependency
denotes class binding
...
Control
Class
T1
Technique
Component
C1
T3
C2
Class
C3
The Component Layer
• Most fundamental layer
• Answers the question “How does this tool do what it
does?”
• Task oriented and specific
• Components tend to outlay the developmental
requirements and restraints of the tool
• Software Development Lifecycle
• C programming libraries
• Robust, portable and generally simple APIs
• Libpcap, Libnet, Libsf, Libnids, Libdnet, OpenSSL
The Component Layer with Dependencies
denotes dependency
libnids
TCP port scan detection
libsf
active fingerprinting
TCP stream reassembly
IP defragmentation
passive fingerprinting
libdnet
addressing
ARP and
route
blob and
PRNG
interface
firewall
ethernet and
IP
packet filtering
packet construction
general purpose
cryptography
packet capturing
packet injection
SSL / TLS
libpcap
libnet
openssl
The Technique Layer
• Answers the question: “What does this tool do?”
• More abstract and solution focused
• The core essence of the tool is captured at this layer
•
When building or classifying tools, we start here
• Class taxonomy is set at this layer
•
Packet Sniffing (Passive Reconnaissance)
•
Port Scanning (Active Reconnaissance)
•
Vulnerability Testing (Attack and Penetration)
•
Firewalling (Defensive)
Network Security Tool Taxonomy
• Simple method allowing for tool grouping
• Tied to the Technique Layer
• Tools may certainly fit in more than one category (Venn
diagram)
• Passive Reconnaissance
• Active Reconnaissance
• Attack and Penetration
• Defensive
The Technique Layer with Classification
Bindings
passive reconnaissance
active reconnaissance
attack and penetration
port scanning
vulnerability scanning
intrusion detection
IP expiry
vulnerability testing
firewalling
packet sniffing
Firewalking
denotes tool class
defensive
encryption
Classification Overview
Passive Reconnaissance Tools
• Gather information in an ostensibly non-detectable or
unobtrusive way
• Tend to have long lifecycles in terms of utility
• Changes no state on the entity
• Tcpdump
• Ethereal
• Mailsnarf
Active Reconnaissance Tools
• Gather information in a detectable way, often by sending
network traffic and waiting for responses
• Tend to have long lifecycles in terms of utility
• Changes very little if any state on the entity
• Firewalk
• Strobe
• Nmap
• Traceroute
Attack and Penetration Tools
• Test for the existence of and/or exploit vulnerabilities
• Tools can have a very limited lifetime
• i.e.: Remote overflow in IIS version 5.0
• Often supported by Reconnaissance Tools
• Nessus
• SSH CRC32 overflow exploit
• apache-scalp.c
Defensive Tools
• Keeps an entity safe often by protecting data or detecting
illicit activity
• Tend to be more complex and have extended execution
lifetimes
• Snort
• GPG
• PF (packet filter on OpenBSD)
The Control Layer
• General abstract “glue layer”
• Can be thought of as a delivery mechanism for techniques
• Less concerned with security-related topics as with
program cohesion
• Not the focus of this presentation
• Command and Control
• Reporting
• Data Correlation and Storage
The Model and The Software Development Lifecycle
Modular model
for network
security tools
requirements
peer review /
feedback
analysis
design
coding
maintenance
deployment
testing
Component Layer Details
Libpcap
Libnet
Libnids
Libsf
Libdnet
OpenSSL
Component Layer Details: Libpcap
• Library for packet capture and filtering
• Support for live capture and offline storage
• Useful for building applications that need to do the
following:
• Network statistics collection
• Network debugging
• Security monitoring
• Often found in active and passive reconnaissance tools
Typical Libpcap Usage
1
Libpcap
Context
pcap_open_live()
Libpcap
Context
2
packet
pcap_next()
packet
3
PACKET PROCESSING
Libpcap
Context
4
pcap_close()
Component Layer Details: Libnet
• Library for packet construction and injection
• Useful for building applications that need to do the following:
•
Network security testing
•
Network bandwidth testing
•
Network utility
• Definitely the most debonair and sophisticated of the
components – truly a discriminating programmer’s component
• New version (1.1.1) is much more robust than its predecessors
•
Simple interface for novice users or
•
Powerful advanced interface
• Often found in active reconnaissance and attack and penetration
tools
Typical Libnet Usage
1
Libnet context
libnet_init()
Libnet context
2
ptag
libnet_build_tcp()
Libnet context
ptag
libnet_build_ipv4(
)
ptag
Libnet context
libnet_build_ether
net()
Libnet context
Bytes
written
3
libnet_write()
Libnet context
4
libnet_destroy()
Libnet Supported Protocols
DNS
NTP
BOOTP
DHCP
Other
Open
Application
Presentation
Session
TCP
UDP
Other
Transport
VRRP
ICMP
IGMP
IP
RIP, OSPF
ESP AH
Other
Open
Network
CDP
802.1Q
Ethernet II
Data Link
Physical
802.2,
SNAP
ARP,
RARP
802.3
STP
Other
4 bytes
The Libnet Context
libnet_t
1 byte
372 bytes
fd
int
protocol
int
injection_type
int
protocol_blocks
libnet_pblock_t *
pblock_end
libnet_pblock_t *
link_type
int
link_offset
int
aligner
int
device
char *
stats
struct libnet_stats
ptag_state
libnet_ptag_t
label
char[64]
err_buf
char[256]
The Libnet Protocol Block
4 bytes
libnet_pblock_t
1 byte
buf
u_char *
b_len
u_long
h_len
u_short, u_long
copied
28 bytes
type
flag
u_char, u_char
ptag
libnet_ptag_t
next
libnet_pblock_t *
prev
libnet_pblock_t *
The Libnet Protocol Block
single context, standard linkage for TCP header (prior to coalesce)
TCP header
IPv4 header
3
Ethernet header
IPPROTO_RAW
LIBNET_LINK
0xdfbf....
0xdfbf....
0xdfbf....
0xdfbf....
0xdfbf....
20
20
14
link_type
link_offset
20
40
0
14
copied
0x1e
0x01
copied
0x0d
0x01
copied
0x04
0
0xdfbf....
1
2
3
0xdfbf....
0xdfbf....
0x00000000
0x00000000
0xdfbf....
0xdfbf....
0
3
“cardshark”
0
“fxp0”
Component Layer Details: Libnids
• Library that simulates a NIDS E-box
• An E-box’s job is to sample the environment in which it is
specialized for, and convert occurrences in the environment into
standard data objects for subsequent storage and/or analysis.
• Built on top of libpcap and libnet
• Offers the following:
• IP defragmentation
• TCP stream reassembly
• Time-based TCP port scan detection
• Often found in defensive tools
Component Layer Details: Libsf
• Library for IP stack fingerprinting to perform remote OS
detection
• Built on top of libpcap and libnet
• active and passive fingerprinting methods
• Based off of the nmap database and P0f databases
• Often found in reconnaissance tools
Typical Libsf Usage
1
Libsf
descriptor
libsf_init()
Libsf
descriptor
2
libsf_active_id()
Libsf
descriptor
3
tm
libsf_get_tm()
Libsf
descriptor
4
hs
Libsf_get_hs()
Libsf descriptor
hs
5
OS
libsf_os_get_match
()
Libsf
descriptor
6
libsf_destroy()
Libsf Active Fingerprinting Tests
• Seven active tests can be performed using fringe packets:
• TCP SYN to an open port
• TCP NULL packet to an open port
• TCP FIN|SYN|PSH|URG packet to an open port
• TCP ACK packet to an open port
• TCP SYN packet to a closed port
• TCP ACK packet to a closed port
• TCP FIN|PSH|URG to a closed port
Libsf Passive Fingerprinting Tests
• Eight passive tests can be preformed across incoming
TCP SYN packets:
• Determine original IP TTL
• IP packet size
• IP DF bit on or off
• TCP window scale option present
• TCP MSS option present
• TCP SACK option present
• TCP NOP option present
• TCP window size
Component Layer Details: Libdnet
• Library for miscellaneous low-level network routines
• Robust network address manipulation
• Kernel ARP cache lookup and manipulation
• Kernel route table lookup and manipulation
• Network interface lookup and manipulation
• Network firewall rule manipulation
• Ethernet frame and IP packet transmission
• Binary buffer manipulation
• Random number manipulation
• Often found in all tools
Component Layer Details: OpenSSL
• Library for SSL / TLS and general cryptography
• SSL/TLS protocols
• Symmetric cryptographic operations (ciphers, message digests)
• Asymmetric cryptographic operations (digital signatures,
enveloping)
• Public Key Infrastructure (PKI), including OCSP, rich X509
certificate support, certificate verification, certificate requests, and
CRLs
• Often found in defensive tools
Technique Layer Details
Packet Sniffing
Port Scanning
IP Expiry
Firewalking
Technique Layer Details: Packet Sniffing
• Passive Reconnaissance Technique
• Used to capture packets on a network
• Very powerful and useful in its own right
•
However it is also a fundamental building block in more complex tools
• Ethernet
•
1972, Bob Metcalfe, ALOHA became Ethernet
•
Shared medium (CSMA/CD)
•
Promiscuous mode instructs card to listen to every frame
•
Only works with stations in the same collision domain
• Bridges, switches, routers, VLANS break sniffing
Technique Layer Details: Packet Sniffing
• Packet Demultiplexing
• Breaking apart an Ethernet frame and passing it the protocol chain
• Protocol Decoding
• Dissection of the packet at a given OSI layer
Technique Layer Details: Packet Sniffing
Processing
Demultiplexing of an Ethernet Frame
0x0800
Ethernet header
Payload (28 bytes)
ETHERTYPE_IP
hl_v
Ethernet II header
0x01
IPv4 header
20 byte header
Payload (8 bytes)
IPPROTO_ICMP
Ethernet II header
IPv4 header
0x08
ICMP header
Echo request
Sample Packet Sniffing Code Snippet
packet = (u_char *)pcap_next(vp->p, &vp->h);
/*
* Figure out which layer 2 protocol the frame belongs to and call
* the corresponding decoding module. The protocol field of an
* Ethernet II header is the 13th + 14th byte. This is an endian
* independent way of extracting a big endian short from memory. We
* extract the first byte and make it the big byte and then extract
* the next byte and make it the small byte.
*/
switch (vp->packet[12] << 0x08 | vp->packet[13])
{
case 0x0800:
/* IPv4 */
decode_ip(&vp->packet[14], vp->flags);
break;
case 0x0806:
/* ARP */
decode_arp(&vp->packet[14], vp->flags);
break;
default:
/* We're not bothering with 802.3 or anything else */
decode_unknown(&vp->packet[14], vp->flags);
break;
}
Technique Layer Details: Port Scanning
• Active Reconnaissance Technique
• Used to determine TCP and UDP port status
• Open, Closed, and optionally what application is listening
• Many Considerations
• Protocol
• Detection and Filtering
• Time and Bandwidth
Technique Layer Details: Port Scanning
Mechanics
•
Full-open
•
Ident
•
FTP bounce
•
Half-open
•
Side effect RST
•
Parallel
•
UDP
•
Stealth
•
FIN
•
XMAS (URG|ACK|PSH)
•
NULL
•
Fragmented IP
Technique Layer Details: Port Scanning
Full-open TCP port scan
FIN
SYN
ACK
SYN|ACK or RST
FIN
ACK
scanning host
target
Connection establishment
scanning host
ACK
target
Connection teardown
Sample Port Scanning Code Snippet
int fd, n, c;
struct sockaddr_in addr;
u_short port_list[] = {22, 23, 25, 80, 6000, 0};
addr.sin_family
= AF_INET;
addr.sin_addr.s_addr = 0x200a8c0; /* 192.168.0.2 in network byte order */
for (n = 0; port_list[n] != 0; n++)
{
addr.sin_port = htons(port_list[n]);
fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
if (fd == -1)
{
/* error */
}
c = connect(fd, (struct sockaddr *)&addr, sizeof (addr));
if (c == -1)
{
/* error */
}
else if (c == 0)
{
printf("port %d open\n", port_list[n]);
}
else
{
printf("port %d closed\n", port_list[n]);
}
close(fd);
}
Technique Layer Details: IP Expiry
• Active Reconnaissance Technique
• Used to map network devices en route to a target host
• Van Jacobson, 1988, Traceroute
• Originally used to trace IP packets to a particular destination host
• Was extended into Firewalking
Technique Layer Details: IP Expiry
Transports
• Protocol specific terminal packet semantics
• UDP
• Open port: undefined (no response)
• Closed port: ICMP port unreachable
• ICMP
• ICMP echo reply
• TCP SYN
• Open port: SYN|ACK
• Closed port: RST
Technique Layer Details: IP Expiry
TTL = n
IP TTL = n, where:
UDP: empty packet to unused port
ICMP: ECHO request
TCP: SYN to arbitrary port
ICMP TTL expired in transit packet
with x.x.x.x as expiry router
x.x.x.x
terminal response packet
UDP: port unreachable
ICMP: ECHO reply
TCP: RST or SYN|ACK
IP TTL = 5
IP TTL = 4
IP TTL = 3
IP TTL = 2
scanning host
destination host
IP TTL = 1
10.0.0.20
10.0.0.1
10.0.1.1
10.0.0.1
10.0.1.1
10.0.2.1
10.0.3.1
terminal response
10.0.2.1
10.0.3.1
10.0.3.20
c = libnet_write(l);
if (c == -1)
{
/* error */
}
fprintf(stderr, "Hop %02d: ", ttl);
pcap_t *p;
for (done = icmp = ip = 0, ttl = 1; ttl </*
31read
&& !done;
ttl++)
loop */
libnet_t *l;
{
for (start = time(NULL); (time(NULL) - start) < 2; )
time_t start;
icmp = libnet_build_icmpv4_echo( {
u_char *packet;
ICMP_ECHO,
/* type
*/
packet
= (u_char
*)pcap_next(p, &ph);
int c, ttl, done;
0,
code */
if /*
(packet
== NULL)
char *device = "fxp0";
0,
{ /* checksum */
struct pcap_pkthdr ph;
242,
/*
id */
continue;
libnet_ptag_t icmp, ip;
ttl,
} /* sequence */
u_long src_ip = 0x1400000a;
/* 10.0.0.20 in network byte order */
NULL,
payload
*/
/* /*
assume
ethernet
here for simplicity */
u_long dst_ip = 0x1403000a;
/* 10.0.3.20 in network byte order */
0,
/*=payloadsiz*/
ip_h
(struct libnet_ipv4_hdr *)(packet + 14);
struct libnet_icmpv4_hdr *icmp_h;
l,
context */
if /*
(ip_h->ip_p
== IPPROTO_ICMP)
struct libnet_ipv4_hdr *ip_h, *oip_h;
icmp);
{ /* libnet id */
char errbuf[LIBNET_ERRBUF_SIZE];
if (icmp == -1)
icmp_h = (struct libnet_icmpv4_hdr *)(packet + 34);
{
/* expired in transit */
l = libnet_init(LIBNET_RAW4, NULL, errbuf);
/* error */
if (icmp_h->icmp_type == ICMP_TIMXCEED &&
if (l == NULL)
}
icmp_h->icmp_code == ICMP_TIMXCEED_INTRANS)
{
ip = libnet_build_ipv4(
{
/* error */
LIBNET_IPV4_H + LIBNET_ICMPV4_ECHO_H,
/* length
oip_h*/
= (struct libnet_ipv4_hdr *)(packet + 42);
}
0,
/* TOS
if*/
(oip_h->ip_id == htons(242))
p = pcap_open_live(device, 60, 0, 500, errbuf);
242,
/* IP{ID */
if (p == NULL)
0,
/* IP Frag
*/
fprintf(stderr,
"%s\n",
{
ttl,
/* TTL */
libnet_addr2name4(ip_h->ip_src.s_addr, 0));
/* error */
IPPROTO_ICMP,
/* protocol
*/
break;
}
0,
/* checksum
*/
}
src_ip,
/*
} src ip */
dst_ip,
/*
ip */ response */
/*dst
terminal
NULL,
/*
*/
ifpayload
(icmp_h->icmp_type
== ICMP_ECHOREPLY)
0,
/*
{ payloadsiz*/
l,
/* context
*/
if (icmp_h->icmp_id
== 242 && icmp_h->icmp_seq == ttl)
ip);
/* libnet
id */
{
if (ip == -1)
fprintf(stderr, "%s\n",
{
libnet_addr2name4(ip_h->ip_src.s_addr, 0));
/* error */
done = 1;
}
break;
}
}
}
}
Sample IP Expiry Code Snippet
Technique Layer Details: Firewalking
• Active Reconnaissance
Technique
• Based off of IP expiry
• Used to determine ACL
filtering rules on a packet
forwarding device
• Schiffman, Goldsmith, 1998
(Daveg)
Technique Layer Details: Firewalking
• Send out a TCP or UDP packet with an IP TTL one greater
of the target gateway
• Packet passed by gateway ACL: ICMP TTL expired in transit
• Packet denied by gateway: No response
• Requires two hosts, target and metric
• Target is the target gateway to be scanned
• Metric is a host or gateway downstream from the target
• Doesn’t have to be reachable
Technique Layer Details: Firewalking
Firewalking host breakdown
scanning host
10.0.0.20
target
10.0.0.1
10.0.1.1
10.0.2.1
metric
10.0.3.1
10.0.3.20
Technique Layer Details: Firewalking (Phase One:
Hopcount Ramping)
Firewalking Phase one
Ramping hopcounts via IP expiry.
TTL = 3
TTL = 2
scanning host
target
metric
TTL = 1
10.0.0.20
10.0.0.1
10.0.1.1
10.0.2.1
10.0.3.1
10.0.0.1
10.0.1.1
10.0.2.1
1. Target gateway is reached
with a TTL of three.
2. Scan is bound here
with a TTL of four.
10.0.3.20
Technique Layer Details: Firewalking (Phase Two:
Scanning, Packet is not Filtered)
TTL = 4, TCP port = 22
Firewalking Phase two
Firewalking scan of target, packet
passes ACL
scanning host
target
metric
1. Packet is sent to the metric.
10.0.0.20
10.0.0.1
10.0.1.1
10.0.2.1
10.0.3.1
4. Logged as open.
2. Packet is not filtered, passes through.
ICMP TTL expired in transit
3. Packet expires.
10.0.3.20
Technique Layer Details: Firewalking (Phase Two:
Scanning, Packet is Filtered)
TTL = 4, TCP port = 23
Firewalking Phase two
Firewalking scan of target, packet
violates ACL
scanning host
target
metric
1. Packet is sent to the metric.
10.0.0.20
10.0.0.1
10.0.1.1
10.0.2.1
10.0.3.1
4. Timer expires, port is filtered on target.
2. Packet is filtered.
3. No response.
10.0.3.20
Firewalk Packet Loss
• Packets can be dropped for a variety of reasons
• IP is an unreliable network
• However, what if there is a prohibitive filter on a gateway prior to the
target?
• We would get false negatives reporting our packet is being filtered on the
target when in fact it is being filtered by another host…
Technique Layer Details: Firewalking (Phase Two:
Early Filtering of Packets)
IP TTL = 4, TCP port = 139
Firewalking Phase two
Early filtering of packets.
scanning host
target
metric
1. Packet is sent to the metric.
10.0.0.20
10.0.0.1
10.0.1.1
3. Scanning host cannot detect the error and assumes
packet was filtered at 10.0.2.1 resulting in a potential false
negative.
2. Packet is filtered here and dropped
and never makes it to the target.
10.0.2.1
10.0.3.1
10.0.3.20
Firewalk Early Packet Filtering Solution
• We have two solutions:
• Performing a “creeping walk” on each intermediate hop en route to
the target. This will determine which gateway has the prohibitive
filter
• Physically relocate the scanning host to another part of the network
so it no longer has to pass through the prohibitive filter in question
• This may not always be an option
Firewalk Adjacent Target and Metric
• Target and metric and topologically adjacent
• Metric is exactly one hop downstream from the target
• If packet violates ACL, nothing happens out of the
ordinary
• Scan times out and ACL is noted
• If packet is passed by the target, it is processed as per
RFC 1122
• Results vary, but packet is generally processed as per the
protocol specific terminal packet semantics as with IP
expiry
• Using this, additional scanning can be performed
Technique Layer Details: Firewalking (Phase Two:
Scanning, Adjacent Target and Metric)
IP TTL = 4, TCP port = 443
Firewalking Phase two
Target and metric adjacent.
scanning host
target
metric
1. Packet is sent to the metric.
10.0.0.20
10.0.0.1
10.0.1.1
10.0.2.1
2. Packet passes ACL.
TCP SYN|ACK
10.0.2.20
3. Packet would expire on metric; but
is processed and a terminal response
sent to the scanning host.
Modeling Existing Tools
Traceroute Modeled
Traceroute
denotes layer dependency
denotes class binding
control logic
interface
reporting
correlation
Control
active
reconnaissance
re
Takes p
IP expiry
Technique
Component
libpcap
ce d e n ce
passive
reconnaissance
packet sniffing
libnet
The Firewalk Tool Modeled
Firewalk
denotes layer dependency
denotes class binding
passive
reconnaissance
active
reconnaissance
control logic
house keeping
reporting
analysis
Control
Technique
Component
Packet sniffing
Port scanning
libpcap
IP expiry
libnet
Firewalking
libdnet
Inside a Network Security Tool: Firewalk
Internals
startup
Firewalk Overall Flow
usage(argv[0]);
fw_shutdown(&fp);
#if /*
(HAVE_CONFIG_H)
shouldbreak;
probably record proper exit status */
break;we"../include/config.h"
#include
return (EXIT_SUCCESS);
case
'i':
default:
#endif
}
/* interface */
usage(argv[0]);
#include "../include/firewalk.h"
fp->device = optarg;
}"../version.h"
#include
void}
break;
int
usage(u_char
case
*argv0)
'n':
c
=
argc
optind;
int
firewalk(struct
firepack
{
/* do not**fp)
use names */
if
(c
!=
2)
main(int
{
argc, char
*argv[])
fprintf(stderr,
fp->flags
"Usage&=
: %s
~FW_RESOLVE;
[options] target_gateway metric\n"
{
{
int done,
i,[-d
j; %d - %d] destination port to use (ramping phase)\n"
"\t\t
break;
/*
int c;
u_short
bport,
cport,
eport;
"\t\t
case
[-h]
'p':
program
help\n"
* firepack
We
should
only have
two arguments at this point, the target
struct
*fp;
"\t\t
/*
[-i
select
device]
firewalk
interface\n"
protocol */
*
gateway
and
the
metric.
char
/*
inform
*port_list
the
user
=do
NULL;
what's
*/
"\t\t
fp->protocol
[-n]
not resolve
=what
fw_prot_select(optarg);
IP addresses into hostnames\n"
*/
char"\t\t
printf("%s-based
errbuf[FW_ERRBUF_SIZE];
scan.\n",
break;
[-p TCP
| UDP] firewalk protocol\n"
usage(argv[0]);
(*fp)->protocol
? "TCP" : "UDP");
"\t\t
case[-r]
'r':strict ==
RFCIPPROTO_TCP
adherence\n"
}
printf("Firewalk
printf("Ramping
phase
5.0
[gateway
source
port:
ACL
scanner]\n");
%d,
destination
port: %d\n",
"\t\t
/*
[-S
Strict
x network
- y,RFC
z] components
adherence
port range*/
to scan\n"
/* initialize
the
*/
(*fp)->sport,
(*fp)->dport);
"\t\t
fp->flags
[-s
%d
%d]
|=
FW_STRICT_RFC;
source
port\n"
if
argv[optind], argv[optind
+ 1],==
port_list)
== /* (fw_init_net(&fp,
if
((*fp)->flags
(*fp)->protocol
IPPROTO_TCP)
"\t\t
break;
[-T 1&-FW_STRICT_RFC
1000] packet &&
read
timeout in ms\n"
1) {* Initialize
the
main
control
context.
We
keep
all
of
our
"\t\t
case[-t
'S':
1 - %d] IP time to live\n"
{* program
printf("Using
state
here
strict
and
RFC
this
adherence.\n");
is
just about every
"\t\t
/*
[-v]
scan
program
these
version\n"
ports
*/ used by
fprintf(stderr,
"fw_init_network():
%s\n", fp->errbuf);
}* function
in
the
program.
"\t\tdone;
port_list
[-x 1 - %d]
= optarg;
expire vector\n"
printf("Hotfoot
*/ goto
through
%s usingFW_PORT_MAX,
%s as a metric.\n",
"\n",
break;
argv0,
FW_PORT_MIN,
FW_PORT_MIN,
}
if (fw_init_context(&fp,
libnet_addr2name4(((*fp)->gateway),
errbuf) == -1)
FW_PORT_MAX,
case
's':
printf("Firewalk
state
initialization
completed
successfully.\n");
{
((*fp)->flags)
& FW_RESOLVE),
/* source
FW_IP_HOP_MAX,
port
*/
/* execute
scan:
phase
one,FW_XV_MAX);
and hopefully
phaseerrbuf);
two */
fprintf(stderr,
libnet_addr2name4(((*fp)->metric),
"fw_init_control():
%s\n",
exit(EXIT_SUCCESS);
fp->sport = fw_str2int(optarg, "source port",
switch
(firewalk(&fp))
goto((*fp)->flags)
done;
& FW_RESOLVE));
}
FW_PORT_MIN,
FW_PORT_MAX);
{
}
/*
break;
case
-1:
* */
PHASE
ONE:
Firewalk hopcount ramping
/* EOF
case
'T':
case
FW_SERIOUS_ERROR:
/*
* process
A
standard
commandline
arguments
IP
*/expiry
scan
is initiated
towards
/* Traceroute-style
time to
wait
packets
from
other
end */
/*
grievous
error
offor
some
sortto
*/
while
* the
((c
metric,
= getopt(argc,
with
the argv,
intent
"d:fhi:no:p:rS:s:T:t:vx:"))
being
find how many"read
hops!=
away
EOF)
the
fp->pcap_timeout
=
fw_str2int(optarg,
timer",
fprintf(stderr,
"firewalk():
%s\n",
fp->errbuf);
{* target
gateway is
from
the
scanning
host.
We'll
increment
the
FW_PCAP_TIMEOUT_MIN, FW_PCAP_TIMEOUT_MAX);
break;
* hopcounter
switch
(c)
and update packet template each pass through theloop.
break;
case
FW_ABORT_SCAN:
*/ {
case
't':
/*
hop
count
exceeded or metric en route */
printf("Ramping
case
'd':
Phase:\n");
/*
set
initial
IP TTL
*/
fprintf(stderr,
"Scan
%s.\n",ramping
fp->errbuf);
for (done = 0,
/*
i
destination
=
0;
port
&&aborted:
ito
< FW_IP_HOP_MAX;
use during
phase */
fp->ttl = !done
fw_str2int(optarg,
"initial i++)
TTL",
break;
{
fp->dport
=
fw_str2int(optarg,
"ramping
destination
FW_IP_HOP_MIN, FW_IP_HOP_MAX);
FW_USER_INTERRUPT:
port", case
/* send
a series of probes (currently only one) */
break;
fprintf(stderr,
"Scan aborted
by user.\n");
for (j
= 0;
j < 1;
FW_PORT_MIN,
j++)
FW_PORT_MAX);
case
'v':
break;
{
break;
/* version */
default:
caseprintf(FW_BANNER
fprintf(stderr,
'f':
"%2d "version
(TTL %2d):
", i + 1,
(*fp)->ttl);
: %s\n",
VERSION);
printf("\nScan
completed
successfully.\n");
if (fw_packet_inject(fp)
/*
stack
fingerprint
of
==
each
-1)
host
*/
goto done;
break;
{
|= FW_FINGERPRINT;
casefp->flags
'x':
}
break;
/*
/*
expire
vector
*/
done:
casefp->xv
*
'h':
Perhaps
this write error"expire
was transient.
= fw_str2int(optarg,
vector", We'll hope
fw_report_stats(&fp);
/*
* program
for the
help
best.
*/ Inform
the user and continue.
FW_XV_MIN,
FW_XV_MAX);
Initialization
No
Report to user
Success?
Yes
Ramping phase
No
Report to user
Success?
Yes
Scanning phase
Shutdown
Report to user
startup
Firewalk Initialization
int
/* setup
/* the metric */
/*/* get the datalink size */
fw_init_net(struct
if *
(((*fp)->metric
Set pcap filter
firepack
= libnet_name2addr4((*fp)->l,
and
**fp,
determine
char *gw,
outgoing
char packet
*m, char
m, size.
1))
*port_list)
== The
-1) filter
*switch
Build(pcap_datalink((*fp)->p))
a probe packet template. We'll use this packet template
{
{ * will be determined by the scanning protocol:
int *{ over and over for each write to the network, modifying certain
#if HAVE_BPF
*snprintf((*fp)->errbuf,
UDP scan:
FW_ERRBUF_SIZE,
fw_init_context(struct
* fields
case (IP
DLT_SLIP:
TTL,firepack
UDP/TCP ports
**fp, and
charof
*errbuf)
course checksums as we go).
int*one;
icmp[0]
"libnet_name2addr4():
== 11 or icmp[0] == 3
%sor
(metric:
udp
%s)",
{
*/
(*fp)->packet_offset = 0x10;
#endif * TCP scan:
libnet_geterror((*fp)->l), m);
*fp(fw_packet_build_probe(fp)
if
= (struct
break;
firepack *)malloc(sizeof(struct
== -1)
firepack));
char
*return
errbuf[PCAP_ERRBUF_SIZE];
icmp[0]
(-1);
== 11 or icmp[0] == 3 or tcp[14] == 0x12 or tcp[14] \
if (*fp
{
case
== DLT_RAW:
NULL)
} * == 0x4 or tcp[14] == 0x14
{
/* error
(*fp)->packet_offset
msg set in fw_packet_build_probe()
= 0x00;
*/
/* */
get a libnet context */
snprintf(errbuf,
return
break;
(-1);
FW_ERRBUF_SIZE, "malloc(): %s", strerror(errno));
(*fp)->l
/*
switch
sanity((*fp)->protocol)
=check
libnet_init(LIBNET_LINK,
*/
(*fp)->device, errbuf);
}
return
case DLT_PPP:
(-1);
if{((*fp)->gateway
((*fp)->l == NULL)
== (*fp)->metric)
}
return
(1);
(*fp)->packet_offset = 0x04;
{
case IPPROTO_UDP:
memset(*fp,
break;
0, sizeof(struct firepack));
snprintf((*fp)->errbuf,
if (fw_set_pcap_filter(FW_BPF_FILTER_UDP,
FW_ERRBUF_SIZE, "libnet_init():
fp) == -1)
%s",
case DLT_EN10MB:
{ "target
errbuf);gateway and metric cannot be the same");
/* setdefault:
defaults here */
return (-1);
/* err msg set in fw_set_pcap_filter() */
(*fp)->ttl(*fp)->packet_offset
= 1;
/*
= 0x0e;
initial probe IP TTL */
}
return (-1);
(*fp)->sport
break;
= 53;
/* source port (TCP and UDP) */
}
(*fp)->dport
}
= 33434;
/* ala traceroute */
/* get our/*
device
port
IP list
+ if
UDPstuff
the
*/ user
situated
didn't*/
specify one*/
(*fp)->protocol
= IPPROTO_UDP;
if (libnet_plist_chain_new((*fp)->l,
((*fp)->device
(*fp)->packet_size
== NULL)
= LIBNET_IPV4_H
&(*fp)->plist,
+ LIBNET_UDP_H;
(*fp)->id
= getpid();
{
port_list
break;
== NULL ? strdup(FW_DEFAULT_PORT_LIST) :
(*fp)->pcap_timeout = FW_REPLY_TIMEOUT;
(*fp)->device
port_list)
case IPPROTO_TCP:
== -1)
= libnet_getdevice((*fp)->l);
(*fp)->xv
= 1;
}
{
if (fw_set_pcap_filter(FW_BPF_FILTER_TCP, fp) == -1)
(*fp)->flags
|= FW_RESOLVE;
snprintf((*fp)->errbuf,
{
FW_ERRBUF_SIZE,
/* get the
"libnet_plist_chain_new():
source
/* err
address
msg set
of our
in fw_set_pcap_filter()
outgoing
%s\n", interface
libnet_geterror((*fp)->l));
*/
*/
/* setup our signal handler to handle a ctrl-c */
(*fp)->sin.sin_addr.s_addr
return (-1);
return (-1); = libnet_get_ipaddr4((*fp)->l);
if (catch_sig(SIGINT, catch_sigint) == -1)
}
}
{
/* get
setup
a pcap
the
/* target
IP
context
+ TCP
gateway
*/
*/
snprintf(errbuf, FW_ERRBUF_SIZE, "catch_sig(): %s",
if (((*fp)->gateway
(*fp)->p
=(*fp)->packet_size
pcap_open_live((*fp)->device,
= libnet_name2addr4((*fp)->l,
= LIBNET_IPV4_H
FW_SNAPLEN,
+ LIBNET_TCP_H;
gw,0,
1))
0,==
errbuf);
-1)
strerror(errno));
{ (((*fp)->p) == NULL)
if
return (-1);
{
snprintf((*fp)->errbuf,
/* randomize the TCP
FW_ERRBUF_SIZE,
sequence number */
}
snprintf((*fp)->errbuf,
libnet_seed_prand((*fp)->l);
"libnet_name2addr4():
FW_ERRBUF_SIZE,
%s (target"pcap_open_live():
gateway: %s)",
%s",
(*fp)->seq
libnet_geterror((*fp)->l),
errbuf);
= libnet_get_prand(LIBNET_PRu32);
gw);
return (1);
returnbreak;
(-1);
}
}
default:
sprintf((*fp)->errbuf,
"fw_init_network(): unsupported protocol");
return (-1);
Shutdown
}
fw_init_context()
No
Allocate and
groom memory
Set initial defaults
Set signal handler
Success?
Yes
getopt()
No
Sanity check some
user parameters
Success?
No
Yes
fw_init_net()
No
Success?
Yes
Ramping Phase
Initialize libnet
Initialize libpcap
Verify and setup
network addresses
Setup port list
Set packet filter
Build packet
template
Firewalk Packet Construction
int
a = arp_open();
fw_packet_build_probe(struct
fw_packet_build_tcp(struct
firepack
firepack
**fp)
**fp)
if (a == NULL)
{ /*
/*{build our IPv4 header */
arp_t
/*
*build
Now
*a;we
a TCP
need
header
to get
*/the MAC address of our first hop gateway.
(*fp)->ip
snprintf((*fp)->errbuf,
= libnet_build_ipv4(
FW_ERRBUF_SIZE, "arp_open()");
route_t
(*fp)->tcp
* Dnet
*r;
to
= the
libnet_build_tcp(
rescue! We start by doing a route table lookup
return
(*fp)->packet_size,
(-1);
/* packetlength */
struct
* toarp_entry
determine
(*fp)->sport,
arp;
the IP address we use to get
/* to
source
the TCP port */
}
0,
/* IP tos */
struct
* destination
route_entry
(*fp)->dport,
host
route;
(the metric).
/* dest TCP port */
/* get the
(*fp)->id,
MAC of the first hop gateway */
/* IP id */
*/
(*fp)->seq,
/* sequence number */
arp.arp_pa
0,= route.route_gw;
/* IP frag bits */
/*
r =
first
route_open();
0L,
build our transport layer header *//* ACK number */
if (arp_get(a,
(*fp)->ttl,
&arp) < 0)
/* IP time to live */
switch
if (r ==
((*fp)->protocol)
TH_SYN,
NULL)
/* control flags */
{
(*fp)->protocol,
/* transport protocol */
{{
1024,
/* window size */
snprintf((*fp)->errbuf,
0,
FW_ERRBUF_SIZE, "route_get()");
/* checksum */
case
snprintf((*fp)->errbuf,
0,
IPPROTO_UDP:
FW_ERRBUF_SIZE,/*
"route_open()");
checksum */
arp_close(a);
(*fp)->sin.sin_addr.s_addr,
/* IP source */
route_close(r);
if (fw_packet_build_udp(fp) == -1) /* urgent */
0,
return
(*fp)->metric,
(-1);
/* IP destination */
return
{
(*fp)->packet_size
(-1);
- LIBNET_IPV4_H, /* TCP size */
}
NULL,
/* IP payload */
}
NULL,
/* error msg set in fw_packet_build_udp()
/* IP payload
*/ */
arp_close(a);
0,
/* IP payload size */
0, return (-1);
/* IP payload size */
(*fp)->l,
/* libnet context */
/* convert
}
(*fp)->l,
the metric address to dnet's native
/* libnet
addr_tcontext
format */
/* build our
0); ethernet header */
/* No saved ptag */
if (addr_aton(libnet_addr2name4((*fp)->metric,
break;
0);
/* No
0),
saved ptag */
if (libnet_autobuild_ethernet(
case IPPROTO_TCP:
&route.route_dst) < 0)
if ((*fp)->ip
(u_char==
*)&arp.arp_ha.addr_eth,
-1)
if
{ ((*fp)->tcp
if (fw_packet_build_tcp(fp)
== -1)
== -1)
{
ETHERTYPE_IP,
{
snprintf((*fp)->errbuf,
{
FW_ERRBUF_SIZE, "addr_aton()");
snprintf((*fp)->errbuf,
(*fp)->l) == -1)
FW_ERRBUF_SIZE, "libnet_build_ipv4() %s",
snprintf((*fp)->errbuf,
route_close(r);
/* error msg setFW_ERRBUF_SIZE,
in fw_packet_build_tcp()
"libnet_build_tcp()
*/
%s",
{
libnet_geterror((*fp)->l));
return libnet_geterror((*fp)->l));
return
(-1); (-1);
snprintf((*fp)->errbuf,
return (-1);
FW_ERRBUF_SIZE,
} return
} (-1);
}
"libnet_autobuild_ethernet() %s",
}/* get the
break;
route entry telling us how to reach the metric */
libnet_geterror((*fp)->l));
return
if (route_get(r,
default:
(1);
&route) < 0)
arp_close(a);
}
{
sprintf((*fp)->errbuf,
return (-1);
snprintf((*fp)->errbuf,
"fw_packet_build_probe():
FW_ERRBUF_SIZE,
unknown
"route_get()");
protocol");
}
route_close(r);
return (-1);
}
return (-1);
return (1);
}
}
route_close(r);
startup
Firewalk Ramping Phase
/*
if (!done)
switch (fw_packet_capture(fp))
* PHASE
{ ONE:
{ Firewalk hopcount ramping
* A standard
if Traceroute-style
(fw_packet_update_probe(fp,
case FW_PACKET_IS_UNREACH_EN_ROUTE:
IP expiry scan
0) ==
is-1)
initiated towards
* the metric,
{
with
case the
FW_PACKET_IS_TTL_EX_EN_ROUTE:
intent being to find how many hops away the
* target gateway
/* is
error
iffrom
((*fp)->flags
msg
the
set
scanning
in fw_packet_update_probe
& FW_BOUND)
host. We'll increment
*/ the
* hopcounter and
return
update
{ (-1);
packet template each pass through the loop.
*/
}
printf("Binding host reached.\n");
printf("Ramping
}
Phase:\n");
done = 1;
for }
(done = 0, i = 0;
} !done && i < FW_IP_HOP_MAX; i++)
{
if (done && !((*fp)->flags
break;
& FW_BOUND))
/* send a series
{
case of
FW_PACKET_IS_TERMINAL_TTL_EX:
probes (currently only one) */
for (j
/* = 0; j
case
< 1;
FW_PACKET_IS_TERMINAL_UNREACH:
j++)
{
* If we're
case "done"
FW_PACKET_IS_TERMINAL_SYNACK:
but not "bound" then we hit the metric
fprintf(stderr,
* before
case
weFW_PACKET_IS_TERMINAL_RST:
hit
"%2d
the(TTL
target
%2d):
gateway.
", i + This
1, (*fp)->ttl);
means the targetYes
if
* (fw_packet_inject(fp)
gateway is
/* not
any en
terminal
route
== to
response
-1)the metric.
will end
Game's
phaseover
one kids.
*/
No
{*/
done = 1;
Success?
sprintf((*fp)->errbuf,
/*
break;
* "metric
Perhaps
case
-1:responded
this writebefore
error target;
was transient.
must notWe'll
be enhope
route");
return
* (FW_ABORT_SCAN);
for the
case
FW_SERIOUS_ERROR:
best. Inform the user and continue.
}
*/
/* err msg set in fw_packet_capture() */
Update ramping
if (!done)
fprintf(stderr,
return (FW_SERIOUS_ERROR);
"fw_packet_inject():probe
%s\n",
fw_packet_update_probe()
{
case(*fp)->errbuf);
FW_USER_INTERRUPT:
/* if
continue;
we fall
/*through
user hit
down
ctrl-c
here,
*/we've exceeded our hopcount */
}
sprintf((*fp)->errbuf,
return (FW_USER_INTERRUPT);
"hopcount exceeded");
return
} (FW_ABORT_SCAN);
}
}
fw_packet_inject()
No
Success?
Yes
fw_packet_capture()
No
Success?
Yes
Yes
Metric
reached?
No
Yes
Hopcount
exceeded?
No
No
Bound / done?
Yes
Shutdown
Write probe to
network
Scanning Phase
Verify probe
startup
Firewalk Scanning Phase
/* send a series of probes (currently only one) */
/*
for (j = 0; j < 1; j++)
* PHASE TWO:
{ Firewalk scanning
* A series of probes
fprintf(stderr,
are sent from
"portto
%3d:
the",
metric
cport);
with the bound IP
* TTL. If a given
(*fp)->stats.ports_total++;
probe is accepted through the target gateway's
* ACL, we willif
receive
(fw_packet_inject(fp)
an ICMP TTL expired
== -1)
in transit from the
* binding host{If we receive no response after the timeout expires,
* it is assumed the
/*probe violated the ACL on the target and was
* dropped.
* Perhaps this write error was transient. We'll
*/
* hope for the best. Inform the user and continue.
(*fp)->ttl += (*fp)->xv;
*/
printf("Scan bound at
fprintf(stderr,
%d hops.\n", (*fp)->ttl);
"fw_packet_inject(): %s\n",
printf("Scanning Phase: \n");
(*fp)->errbuf);
for (done = 0, i = 0;
continue;
!done; i++)
{
}
if (!libnet_plist_chain_next_pair((*fp)->plist,
/* we don't care what the return value
&bport,
is this
&eport))
time */
{
switch(fw_packet_capture(fp))
/* we've{exhausted our portlist and we're done */
done = 1;
case FW_USER_INTERRUPT:
continue;
return (FW_USER_INTERRUPT);
}
case -1:
while (!(bport >case
eport)
FW_SERIOUS_ERROR:
&& bport != 0)
{
/* err msg set in fw_packet_capture() */
cport = bport++;return (FW_SERIOUS_ERROR);
if (fw_packet_update_probe(fp,
default:
cport) == -1)
{
/* empty */
/* error
}
msg set in fw_packet_update_probe */
return (-1);
}
}
}
return (1);
}
libnet_plist_chain_next_pair()
Yes
Exhausted port
list?
No
fw_packet_update_probe()
No
Update scanning
probe
Success?
Yes
Write probe to
network
fw_packet_inject()
No
Success
Yes
fw_packet_capture()
Success
No
Shutdown
Yes
Verify probe
startup
Firewalk Capture
switchfor
(!(((*fp)->flags)
(timed_out = 0;&!timed_out
FW_BOUND) &&
? fw_packet_verify_ramp(fp)
loop; )
:
{
casefw_packet_verify_scan(fp))
FW_PORT_IS_OPEN_RST:
{ c = select(pcap_fd
/* SCANNING: A+response
1, &read_set,
from a0,
closed
0, &timeout);
TCP port */
switch
casefw_report(FW_PORT_IS_OPEN_RST,
FW_PACKET_IS_TTL_EX_EN_ROUTE:
(c)
fp);
{
/* RAMPING: TTL expired en route to gateway (standard) */
(*fp)->stats.packets_caught_interesting++;
case
fw_report(FW_PACKET_IS_TTL_EX_EN_ROUTE,
return
-1:(FW_PORT_IS_OPEN_RST);
fp);
case(*fp)->stats.packets_caught_interesting++;
FW_PORT_IS_OPEN_UNREACH:
snprintf((*fp)->errbuf, FW_ERRBUF_SIZE,
Shutdown
return
/*
SCANNING:
(FW_PACKET_IS_TTL_EX_EN_ROUTE);
"select()
A port unreachable
%s", strerror(errno));
response */
casefw_report(FW_PORT_IS_OPEN_UNREACH,
FW_PACKET_IS_UNREACH_EN_ROUTE:
return (-1);
fp);
case
/* RAMPING:
(*fp)->stats.packets_caught_interesting++;
0:
Unreachable en route to gateway (uncommon) */
fw_report(FW_PACKET_IS_UNREACH_EN_ROUTE,
return
timed_out
(FW_PORT_IS_OPEN_UNREACH);
= 1;
fp);
case(*fp)->stats.packets_caught_interesting++;
FW_PORT_IS_OPEN_TTL_EX:
continue;
default:
return
/*
SCANNING:
(FW_PACKET_IS_TTL_EX_EN_ROUTE);
A TTL expired */
casefw_report(FW_PORT_IS_OPEN_TTL_EX,
FW_PACKET_IS_TERMINAL_TTL_EX:
if (FD_ISSET(pcap_fd, &read_set)
fp);
== 0)
/* RAMPING:
(*fp)->stats.packets_caught_interesting++;
{
TTL expired at destination (rare) */
fw_report(FW_PACKET_IS_TERMINAL_TTL_EX,
return
timed_out = 1;
(FW_PORT_IS_OPEN_TTL_EX);
fp);
case(*fp)->stats.packets_caught_interesting++;
FW_PACKET_IS_BORING:
continue;
default:
return
}
(FW_PACKET_IS_TERMINAL_TTL_EX);
casecontinue;
FW_PACKET_IS_TERMINAL_UNREACH:
/* fall through to read the packet */
} }
/* RAMPING: Unreachable at destination (uncommon) */
}
(*fp)->packet
fw_report(FW_PACKET_IS_TERMINAL_UNREACH,
= (u_char *)pcap_next((*fp)->p, fp);
&pc_hdr);
if ((*fp)->packet
(*fp)->stats.packets_caught_interesting++;
== NULL)
{
return (FW_PACKET_IS_TERMINAL_UNREACH);
case
/*FW_PACKET_IS_TERMINAL_SYNACK:
no NULL packets please */
continue;
fw_report(FW_PACKET_IS_TERMINAL_SYNACK, fp);
}
(*fp)->stats.packets_caught_interesting++;
(*fp)->stats.packets_caught++;
return (FW_PACKET_IS_TERMINAL_SYNACK);
case FW_PACKET_IS_TERMINAL_RST:
fw_report(FW_PACKET_IS_TERMINAL_RST, fp);
(*fp)->stats.packets_caught_interesting++;
return (FW_PACKET_IS_TERMINAL_RST);
case FW_PORT_IS_OPEN_SYNACK:
/* SCANNING: A response from an open TCP port */
fw_report(FW_PORT_IS_OPEN_SYNACK, fp);
(*fp)->stats.packets_caught_interesting++;
return (FW_PORT_IS_OPEN_SYNACK);
select()
Error
Error?
Timeout?
Ready?
Ready
pcap_next()
No
Success?
Yes
fw_packet_verify()
Yes
Boring packet?
No
Return response
Timeout
FW_NO_REPLY
startup
Firewalk Packet Verification
(ramping phase)
Yes
Packet we
sent?
No
ICMP packet?
No
Yes
Time exceed?
Unreach?
Yes
No
Yes
No
No
TCP packet?
In Transit?
Scanning
TCP?
Yes
SYN or RST
packet?
Yes
No
Yes
No
Match our
tuple?
Yes
Firewalk
Response
Packet?
No
Yes
From metric?
Yes
FW_PACKET_IS_TERMINAL
No
From gateway?
FW_PACKET_IS_BORING
No
Yes
No
Yes
RFC
compliant?
Yes
Scan is bound
No
FW_PACKET_IS_EN_ROUTE
startup
Yes
Firewalk Packet Verification
(Scanning Phase)
Packet we
sent?
No
ICMP packet?
No
Yes
Time exceed?
Unreach?
Yes
No
Yes
No
No
TCP packet?
In Transit?
Scanning
TCP?
Yes
No
SYN or RST
packet?
Yes
No
Yes
Match our
tuple?
Yes
Firewalk
Response
Packet?
No
FW_PACKET_IS_BORING
Yes
No
No
Yes
RFC
compliant?
Yes
FW_PORT_IS_OPEN
No
Conclusion
• Modular Model of Network Security Tools
• Components and Techniques
• This was not an exhaustive list of Components or Techniques…
• Examples of how to code Techniques using Components
Questions and Comments?
[email protected]
http://www.packetfactory.net