Transcript スライド 1 - CTI Telekom

NS1000 Version 2
Document for SE and Sales Training
KX-NS8188 E1 Adapter
KX-NS8290 PRI Adapter
Product Information
Rev 1.1E January 09, 2013
Panasonic System Networks
PBX SE team
Specifications and schedule are subject to change without notice.
1. Introduction
When customers want to use IP-Phone (*) mainly for extension and they
want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with
new trunk adapter is recommended because KX-NS1000 supports more
IP capacity and IP functionality than KX-NCP or KX-TDE.
(*)
- KX-NT / KX-UT by Panasonic
- NT based software phone by Panasonic
- SIP hardware phone by other maker
- SIP software phone for PC, Android, iPhone and so on
Panasonic
KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
Model
PRI30
Specifications
KX-NS8188X
E1 adapter on SIP trunk
KX-NS8290CE
PRI30 adapter on SIP trunk
KX-NS8290X
PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
PRI Card
KX-NCS0290
IP Network
215 mm (W)
44 mm (H)
200 mm (D)
KX-NT
500g
KX-NS1000
KX-UT
Other
SIP Phone
SIP
Softphone
2
Stacking
Card
2. Introduction
On the other hand, when customer has Panasonic PBX now, they can
add IP capacity and IP functionality using KX-NS1000 version 2 with
stacking card KX-NS0130 with keeping current PBX.
This configuration is useful for new customer also when
they need more SLT phone, Digital PT with DSS Console,
Analog PT and analog CO as well as IP-Phone. KX-NS0130 SC card for NS100
Before adding KX-NS1000
After adding KX-NS1000
Analog
CO
Analog
CO
KX-TDE
KX-TDE
KX-NS0132
SC card for TDA/TDE
Direct Connection
like TDE600 to TDE620
MPR Card
EXT Card
SC Card
100 % Feature
Transparency
like TDE600
to TDE620
SLT
SC card for NCP
CO Card
CO Card
EXT Card
KX-NS0131
KX-DT w/
DSS Console
SLT
KX-DT w/
DSS Console
KX-NS1000
SC Card
KX-NCS0130
IP Network
KX-NT
KX-UT
Other
SIP Phone
SIP
Softphone
3
3. Table of Contents
Chapter
Explanation
1
Overview
2
Specifications
3
Concept of programming for Public mode
4
Step by step programming for the trunk adapter
5
Step by step programming for KX-NS1000
6
Programming hint for Private mode (QSIG)
7
Demonstration guide
4
Chapter 1
Overview
5
11. Trunk Adapter for E1 / PRI
Panasonic KX-NS8290 increases PRI capacity. KX-NS8188 for E1.
Two PRI by card and adapter
One PRI by card
Panasonic
KX-NS8290
PRI30
Trunk Adaptor
PRI30
KX-NS1000
SIP Extension
SIP Trunk (30-ch)
KX-NCS0290
PRI Card
KX-NCS0290
IP Network
IP Network
KX-UT
KX-NS1000
IP Trunk AK
PRI Card
KX-NT
PRI30
Other
SIP Phone
SIP
Softphone
KX-NT
KX-UT
Other
SIP Phone
SIP
Softphone
Activation key of IP Trunk is NOT required in KX-NS1000 to connect
PRI / E1 trunk adapter, even if SIP Trunk of KX-NS1000 is used.
6
12. Trunk Adapter for E1 / PRI - Capacity
Maximum 256 ch is available for E1 / PRI by adapter and IP trunk.
Line
NS1000
x1
NS1000
x2
256
256 x 2
600
Legacy
256
256 x 2
600
IP incl E1/PRI adapter
256
256
SIP
256
256
H.323
48
48 x 2 = 96
Trunk
SIP
Provider
SIP Trunk
(xx-ch)
PRI30
E1
PRI30
E1
Trunk Adaptor
Trunk Adaptor
SIP Trunk
(30-ch)
SIP Trunk
(30-ch)
NS1000
x3
NS1000
x 4 or more
Also useful to provide PRI/E1
with 2-ch Analog CO or 4 BRI.
PRI30
256ch
PRI Card
Max. 256ch can be registered to SIP provider or the adapter.
PRI30
E1
Trunk Adaptor
SIP Trunk
(30-ch)
Analog
CO
CO Card
7
13. TDE as Option by H.323
Reference
KX-TDE with CO card increases CO capacity using H.323.
More Analog CO by TDE (H.323)
Analog
CO
Enhanced
QSIG AK
Enhanced
Feature AK
KX-TDE
IP Trunk AK
CO Card
H.323
IP Trunk AK
MPR Card
w/ VoIP DSP
IP Network
SC Card
Stacking card is
not required
in this case.
KX-NT
KX-UT
Other
SIP Phone
SIP
Softphone
Activation key of IP Trunk is required in KX-NS1000 for H.323 all
channels and required in KX-TDE for more than 4 or 16 channels.
Activation key for “Enhanced QSIG” is not required because this
configuration needs only basic QSIG function.
8
14. TDE as Option by H.323 - Capacity
Reference
Maximum 96 ch is available for Analog CO / BRI and H.323.
Line
NS1000
x1
NS1000
x2
256
256 x 2
600
Legacy
256
256 x 2
600
IP incl E1/PRI adapter
256
256
SIP
256
256
H.323
incl Analog CO by TDE
48
48 x 2 = 96
Trunk
Branch
NS1000
x3
HQ
PRI30
Analog
CO
CO Card
KX-NCP
H.323
(32 ch)
IP Network
NS1000
x 4 or more
Trunk Adaptor
KX-TDE
H.323
(32 ch)
MPR Card
w/ VoIP DSP
H.323 + SIP Trunk
(256 ch)
H.323
(96 ch)
Analog
CO
KX-NS1000
CO Card
CO Card
Max. 96ch can be used for any other PBX. (Chanel is occupied only when call is made. )
9
Stacking
Card
15. Stacking Card
Stacking Card increases DPT + SLT + Trunk capacity.
100 % Feature
Transparency
More Analog CO and DPT / SLT by Stacking Card
Analog
CO
like TDE600 to TDE620
Direct Connection
like TDE600 to TDE620
KX-TDE
KX-NS1000
CO Card
EXT Card
SC Card
SC Card
IP Network
SLT
KX-DT
KX-NT
KX-UT
Other
SIP Phone
SIP
Softphone
This configuration is useful if customer needs DPT with DSS Console
and so on.
- SC card for TDE-NCP is installed instead of MPR card.
- SC card for NS1000 is installed to free slot. (Slot for “PRI+2SLT” etc )
10
Stacking
Card
16-1. Stacking Card - Specifications
Specifications
You can connect a maximum of 2 existing PBXs for one KX-NS1000. A
maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for
the entire One-look Network.
An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series,
or KX-TDA100/200/600/620 PBX.
IP Network
KX-TDE620
SC Card
KX-TDE600
KX-TDE600
KX-NCP
SC Card
SC Card
KX-TDE620
KX-NCP
SC Card
SC Card
IP Network
Max. 8
PBXs
QSIG
KX-DT KX-DT
KX-DT
KX-DT
Different PBX category cannot be mixed to one KX-NS1000.
Category 1 : KX-NCP500-1000
Category 2 : KX-TDE(A)100-200
Category 3 : KX-TDE(A)600-620
Stacking card for KX-TDA100D is not planned currently.
KX-DT
KX-DT
NCP500+TDE200 : N/A
TDE100+TDA200 : OK
TDE600+TDE620 : OK
TDE620+TDE620 : OK
11
16-2. Stacking Card - Conditions
Conditions
- Cards in right table are not supported.
Reason is as follows.
- MPR is not required.
- IP feature is supported by KX-NS1000.
- DISA/SVM feature is supported by KX-NS1000
without AK.
- New cards for TDE-NCP version 5 are N/A.
- By above condition, KX-NT400 and KX-HGT100
cannot be used after connecting with KX-NS1000.
- IP capacity AK is not required for trunk and
extension in existing PBXs because these are
not IP.
- Other AK such as CA is required in KX-NS1000 for
extension in existing PBX.
- In case of TDA100/200 and TDE100/200
OPB3 card with ECHO16 must be installed in only Slot 1.
*) Other cards except OPB3 or OPB3 card with other daughter
board except ECHO16 can be installed to any slot.
Stacking
Card
Not Supported
Symbol
Model
RMT
TDA0196
MEC
TDA0105/
TDE0105
DSP4
NCP1104
DSP16
TDE0110
DSP64
TDE0111
CTI-LINK
TDA0410
IP-EXT16
TDA0470
IP-GW4E
TDA0484
IP-GW16
TDA0490
IP GW4
TDA0480
MSG4
TDA0191
ESVM2
TDA0192
ESVM4
TDA0194
CLCOT8
TDA1180
CLCOT8E
TDA1186
MCSLC24
TDA1178
MCSLC16
TDA1176
12
17. Stacking Card - Programming
Stacking
Card
Programming
It is not required to program for connection (Same as TDE600 to
TDE620 connection). Property of cards in TDE/NCP can be
programmed using NS1000 Web.
13
18. Recommendation of Configuration
KX-NS1000 is recommended as follows, when new customer does not
have Panasonic PBX now and they want to use IP phone mainly for
extension.
When customer wants to use
for Extension
for Trunk
One PRI or 4 BRI
Recommendation
Optional Card
Version 1 & 2
Trunk Adapter
(+ Optional Card)
Version 2
TDE/NCP
as option
by H.323
Version 1 & 2
E1 / 2 or more PRI
E1 / PRI + 4 BRI
IP Phone + 2 SLT
E1 / PRI + 2 Analog
3 or more Analog CO
5 or more BRI
Other mixture
IP Phone
+ Digital PT
+ Analog PT + SLT
(Any above configuration)
TDE620
with
Stacking Card
Version 2
14
19. KX-NS1000 Capacity
Total capacity is as follows.
Line
Trunk
Legacy
NS1000
x1
NS1000
x2
NS1000
x3
NS1000
x 4 or more
256
256 x 2
600
256
256 x 2
600
by stacking card or/and “xxx+SLT2” card
IP incl E1/PRI adapter
256
256
SIP
256
256
H.323
48
48 x 2 = 96
640
1000
480 SLT (*1)
512 DPT (*2)
1000
640
1000
UT
640
1000
NT (NS1000 V1)
128
128 x 2
128 x 3
128 x N or 1000
NT (NS1000 V2)
256
256 x 2
256 x 3
1000
Extension
Digital PT / Analog PT / SLT
by stacking card or/and “xxx+SLT2” card
IP
(*1) 24SLT x 10 by TDE620 x 2 for example
(*2) 256 DPT incl DXDP by TDE620 x 2 for example
15
Chapter 2
Specifications
16
21. Hardware Appearance
Hardware Appearance is as follows.
Front
Back
Wall Mountain
No.
Description
1
System LED
2
E1 / PRI line LED
3
DC Jack
4
LAN Port
5
LAN LED (Link)
6
LAN LED (Transmission Speed)
7
E1 / PRI line port
8
Initialize button (Not slide switch)
Unpack the box and check the items below:
Main Unit x 1
Screw x 2
Washer x 2
17
22. PoE (Power over Ethernet)
KX-NS8188 / KX-NS8290 supports PoE.
If PoE is not supported by network, AC adapter is required.
KX-A420 for Brazil
KX-A239 for others
*) These are same model of AC adapter for KX-UT phone.
18
23. KX-NS8188 E1 Adapter
KX-NS8188 E1 adapter supports following features.
Features
NS8188
TDA0188
(Reference)
DR2
Yes
Yes
E&M-C
No
Yes
E&M-P
No
Yes
MFC-R2
Yes
Yes
DTMF
Yes
Yes
Pulse
No
Yes
Caller Number Notification (ANI)
Yes
Yes
Charge / Meter Pulse
No
Yes
Deny collect call for Brazil
Yes
Yes
Outgoing call auto disconnect
Yes
Yes
Signaling
Dial Type
E1
KX-NS8188
Trunk Adaptor
KX-TDA0188
KX-TDE
KX-NS1000
19
24. KX-NS8290 PRI Adapter
KX-NS8290 PRI adapter supports following features.
Features
Mode
NS8290
NS0290
(Reference)
CO (Public)
Yes
Yes
Extension
No
Yes
QSIG-master/slave (Private)
Yes
Yes
CLIP / CLIR
Yes
Yes
COLP / COLR
No
Yes
CNIP /CNIR
Yes
Yes
CONP / CONR
No
Yes
Advice of charge
Yes
Yes
Call Forwarding
No
Yes
Call Hold
No
Yes
Call Transfer (incl. ISDN Centrex)
No
Yes
Tree-party conference
No
Yes
Malicious call identification
No
Yes
Generic keypad protocol
No
Yes
CCBS
No
Yes
ISDN - Virtual Private Network
No
Yes
E-911 (for PRI23)
Yes
Yes
ISDN
Carrier Service
(Public)
“No” because these
services by ISDN
provider are not popular
and PBX can support
same feature basically.
Conf
by
PBX
Conf
by
ISDN
ISDN
KX-NS8290
Trunk Adaptor
KX-NS0290
PRI Card
KX-NS1000
20
25. KX-NS8290 PRI Adapter for QSIG
KX-NS8290 PRI adapter supports QSIG also.
Features
QSIG service
NS8290
TDA0290
(Reference)
CLIP/CLIR
Yes
Yes
CNIP/CNIR
Yes
Yes
Call Forwarding (CF)
Yes
Yes
Call Transfer (CT)
Yes
Yes
Completion of Calls to Busy
Subscriber (CCBS)
Yes
Yes
Network Direct Station
Selection (NDSS)
Yes
Centralized Voice Mail
Yes
Yes
Network ICD Group
Yes
Yes
IP incl E1/PRI adapter
PRI QSIG
Private
Network
(Leased ISDN)
PRI QSIG
Trunk Adaptor
H.323 QSIG
Yes
30ch or 23ch
H.323 is used for this configuration instead of SIP.
Line
NS1000 or other PBX
NS1000
x1
NS1000
x2
IP Trunk AK
KX-NS1000
NS1000
x3
256
256
SIP + PRI Adapter for Public
256
256
H.323 + PRI Adapter for QSIG
48
48 x 2 = 96
NS1000
x 4 or more
21
26. Fractional Service
Fractional service is also available.
<Stand alone>
20ch
E1/PRI
Trunk Adaptor
20ch
KX-NS1000
<One-look network>
20ch
E1/PRI
Trunk Adaptor
60ch
E1/PRI
Trunk Adaptor
10ch
E1/PRI
Trunk Adaptor
Trunk Adaptor
Total 256ch
20ch
1st KX-NS1000
in Fukuoka
30ch
2nd KX-NS1000
in Tokyo
30ch
10ch
16th KX-NS1000
in Niseko
22
27. Solution with “Back-up Master”
Back-up is available automatically for SIP trunk incl E1 / PRI
adapter, KX-NT/UT IP-phone and one look connection.
PRI/E1 or SIP Provider
Trunk Adaptor
SIP Trunk
KX-NS1000 (2nd)
Back-up Master
One-Look AK
One-Look AK
KX-NS1000 (1st)
Master
KX-NT
KX-UT
KX-NT
Back-up master PBX
works as slave PBX
usually.
But it works as
master PBX after
master PBX stops
working.
KX-UT
PRI/E1 or SIP Provider
Trunk Adaptor
After master PBX stops working,
KX-NS1000
Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000
Master
KX-NT
KX-UT
KX-NT
KX-UT
23
Chapter 3
Concept of Programming
for Public Connection
24
31. Concept of Programming - Adapter
The trunk adapter is PBX with E1 / PRI trunk and SIP extension.
SIP trunk of KX-NS1000 is registered to SIP extension of the adapter.
<Programming for the trunk adapter>
Software of the adapter is basically same as KX-NS1000. Features except
E1 / PRI and SIP extension are removed. Therefore programming method
is very similar to KX-NS1000.
E1/ ISDN
- PRI configuration is same as programming
for KX-NS1000 PRI card (KX-NS0290).
E1 configuration is same as KX-TDE E1
card (KX-TDA0188).
- SIP extension configuration is same as
KX-NS1000.
But SIP extension is programmed
by default.
KX-TDA0188
401 to 430 for E1 / PRI30
KX-TDE
401 to 423 for PRI23
PRI
E1 / PRI
Trunk Adaptor
SIP Extension
401-430
30ch or 23ch
ID 401-430
SIP Trunk
PRI Card
KX-NS1000
KX-NS0290
25
32. Concept of Programming – NS1000
<Programming for KX-NS1000>
The trunk adapter is basically SIP provider for KX-NS1000.
Following has to be programmed.
- IP address of the adapter as SIP server destination
- SIP registration User ID (Password is not required.)
- Connection Attribute : SIP Provider / Trunk Adapter
E1/ ISDN
E1 / PRI
Trunk Adaptor
SIP Extension
401-430
30ch or 23ch
ID 401-430
SIP Trunk
KX-NS1000
26
33. Concept of Programming - Call
<Programming for KX-NS1000 - CONT>
Programming of the trunk adapter is not
required for DDI / DIL incoming call from
E1/PRI to SIP extension. It works like DIL
1:1 without programming and DDI
number and caller ID are informed from
the trunk adapter to KX-NS1000.
Programming of KX-NS1000 is required
for DDI / DIL.
Outgoing call is also programmed for
KX-NS1000 instead of the trunk adapter.
E1 / ISDN
E1 / PRI
CH1
CH2
CH30
Trunk Adapter
DDI
Caller ID
SIP Extension
401
SIP Trunk
402
430
KX-NS1000
Therefore administrator has to access
only KX-NS1000 to change extension
number, DDI and so on after dealer
installed.
27
Chapter 4
Step by Step Programming
for Trunk Adapter
Trunk Adaptor
KX-NS1000
28
41. Initialize
Operation and “SYSTEM” LED display is as follows.
1. Power On (Connect AC adapter or connect LAN with PoE)
(a) Amber On (5 sec)
(b) Amber rapid flash (5 sec)
2. During (b), keep pressing Initialize button for 1s.
(c) Off (2 sec)
(d) Amber On (30 sec)
(e) Amber slow flash (120 sec)
(f) Green slow flash
Trunk Adaptor
KX-NS1000
- Display of (b) finishes before 5 sec after operation of (2).
- Display of (f) means success of initialization and awaiting
“Easy set-up” of web maintenance console.
System LED
Initialize Button
29
42. LED Indication
LED indication is as follows.
Trunk Adaptor
KX-NS1000
30
43. PC Connection - 1
(1) Set IP address 192.168.0.99 for example to your PC like
first connection of KX-TDE or KX-NCP.
- Trunk adapter does not have maintenance port with
DHCP server.
- Sub-net mask should be 255.255.255.0
(2) Connect 192.168.0.151 by Firefox.
- Default IP address of trunk adapter is 192.168.0.151.
Trunk Adaptor
KX-NS1000
KX-NS1000
DHCP Server
192.168.0.101
by default
Trunk Adapter
192.168.0.99
for example
192.168.0.151
by default
For demo, NS1000 with
DHCP server function
is useful to assign IP
address of PC
automatically.
31
43. PC Connection - 2
(1) In 10 seconds from step in previous page,
log-in menu is displayed.
(2) Input “INSTALLER” as user and “1234” as password.
Trunk Adaptor
KX-NS1000
32
44. Easy setup - Language selection
(1) Select language.
Trunk Adaptor
KX-NS1000
33
44. Easy setup - 1
(1) Select Suffix of KX-NS1000 and area.
Trunk Adaptor
KX-NS1000
No need
to change
If Suffix is changed, system restarts
again after click [OK].
Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec)
(b) Amber On (10 sec)
(c) Amber rapid flash (5 sec)
(d) Amber On (30 sec)
(e) Amber slow flash (120 sec)
(f) Green slow flash
34
44. Easy setup - 2
No need to change.
- Adapter name is only for reference.
- Time is used only for error log.
Trunk Adaptor
KX-NS1000
35
44. Easy setup - 3
(1) Input IP address of trunk adapter in actual customer’s
network. Get the IP address from IT manager.
*) For demo, default is OK.
Trunk Adaptor
KX-NS1000
36
44. Easy setup - 4
No need to change.
- Time is used only for error log.
Trunk Adaptor
KX-NS1000
37
44. Easy setup - 5
(1) Input password as you hope, click [Finish].
(2) Wait for 30 seconds.
Trunk Adaptor
KX-NS1000
If LAN setting is changed, system
restarts again after click [OK].
Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec)
(b) Amber On (10 sec)
(c) Amber rapid flash (5 sec)
(d) Amber On (30 sec)
(e) Amber slow flash (120 sec)
(f) Green slow flash
38
45. Maintenance Console - Top menu
If LAN setting is changed,
(1) Remove the trunk adapter from LAN
(2) Connect it to actual customer’s network.
(3) Connect PC to IP address of trunk adapter using Firefox.
(4) After log-in, following top menu is displayed.
Trunk Adaptor
KX-NS1000
If LAN setting is not changed, following Top menu is displayed.
39
45. Maintenance Console - 1
Software version can be confirmed as follows.
Trunk Adaptor
KX-NS1000
40
45. Maintenance Console - 2
Parameter for PRI can be modified as follows.
(Same as “PRI + 2 SLT” card)
Trunk Adaptor
KX-NS1000
41
45. Maintenance Console - 3
IP address of adapter can be changed.
(No need to change usually.)
Trunk Adaptor
KX-NS1000
42
45. Maintenance Console - 4
Software can be updated by one step.
(Not same as KX-NS1000)
- Wait 15 minutes after clicking [Execute].
(Same as KX-NS1000.)
Trunk Adaptor
KX-NS1000
43
45. Maintenance Console - 5
E1/ PRI Card diagnosis is supported.
Trunk Adaptor
KX-NS1000
Out of service can be assigned.
This is required for software update also.
44
Chapter 5
Step by Step Programming
for KX-NS1000
45
51. KX-NS1000 - Out of Service
Install virtual SIP trunk card.
Out of service is required for port or card before
programming in following pages.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
46
52. KX-NS1000 - Connection Attribute
Change connection attribute from “SIP provider”
to “Trunk Adapter” for each channels or click
[Trunk Adapter] button to change max. 30 ch
at the same time.
Use this.
No need to program each ch.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
47
53. KX-NS1000 - Trunk Adapter button - 1
Input IP address of trunk adapter and click [Next].
- Trunk adapter name is for reference.
192.168.0.151
Trunk Adaptor
192.168.0.152
Trunk Adaptor
KX-NS1000
Web maintenance console for
the trunk adapter is opened.
For reference
Max. 16 Adapter
*) If program manually not using “trunk adapter”, more than 16 adapter
can be programmed.
48
54. KX-NS1000 - Trunk Adapter button - 2
Select range to connect the trunk
adapter instead of SIP provider.
Select IP address and click [Finish].
If fractional service is used, set “20” for
example. Otherwise NS1000 tries making
call using 21ch to 30ch of PRI.
SIP
Provider
192.168.0.151
Trunk Adaptor
192.168.0.152
Trunk Adaptor
KX-NS1000
49
55. KX-NS1000 - Registration to SIP Server
Connection attribute were programmed by previous
step. Parameters for registration to SIP server
(E1/PRI adapter) were also programmed.
192.168.0.151
Trunk Adaptor
192.168.0.152
Trunk Adaptor
KX-NS1000
50
56. KX-NS1000 - CLIP
“PBX CLIP” has to be selected as follows to send
CLIP on extension for outgoing call.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
51
57. KX-NS1000 - In Service
Set In Service.
E1 /
- Other programming such as ARS, TRS is
ISDN
basically same as PRI for KX-TDE/NCP.
- However it is required to program as next 2 pages
additionally because I/F with trunk adapter is SIP.
Trunk Adaptor
KX-NS1000
When E1/PRI line of trunk adapter is fault,
trunk adapter stops communication with
KX-NS1000. Therefore the SIP trunk ch
of KX-NS1000 becomes fault.
This specification is useful not to use the
SIP ch automatically for ARS and so on.
52
58. KX-NS1000 - Dialing Plan
Dialing plan has to be programmed for outgoing call
Trunk Adaptor
Trunk Adaptor
because I/F with trunk adapter is SIP en-block dial.
Otherwise extension caller has to wait for 10 seconds
to hear ring back tone after dial to E1/PRI trunk
adapter.
KX-NS1000
53
59. KX-NS1000 - DDI Modification
DDI first 3 digits has to be removed because I/F with trunk adapter is
SIP. ID such as “401” + real DDI number is informed as DDI number from
E1/PRI adapter to KX-NS1000.
E1 / ISDN
Trunk Adaptor
DDI 5678
DDI 4015678
DDI 5678
KX-NS1000
Program DDI table.
54
Chapter 6
Programming Hint for
Private Mode (QSIG)
55
61. Easy Setup for Adapter
“Private” has to be selected by easy setup mode.
192.168.0.101
192.168.0.151
H.323 Trunk Adaptor
ISDN QSIG
Ext 1xx
KX-NS1000
Ext 2xx
56
62. PRI QSIG mode for Adapter
QSIG (Slave) is assigned automatically after easy setup.
192.168.0.101
192.168.0.151
H.323 Trunk Adaptor
ISDN QSIG
Ext 1xx
KX-NS1000
Ext 2xx
57
63. H.323 programming for Adapter
H.323 destination programming of adapter is also required.
Common IP address is assigned for any dial. (Not each dial)
192.168.0.101
192.168.0.151
H.323 Trunk Adaptor
ISDN QSIG
Ext 1xx
KX-NS1000
Ext 2xx
IP address of Back-up
master PBX
192.168.0.101
58
64. H.323 programming for KX-NS1000
H.323 destination programming of KX-NS1000 is required for adapter
as well as other PBXs.
Sole difference is that activation key for IP trunk is not required.
192.168.0.101
192.168.0.151
H.323 Trunk Adaptor
ISDN QSIG
Ext 1xx
192.168.30.101
IP Network
Ext 3xx
KX-NS1000
DN2IP table (Dial to IP)
----------------------------------Dial 2xx to 192.168.0.151
Dial 3xx to 192.168.30.101
Dial 4xx to 192.168.40.101
Ext 2xx
192.168.40.101
Ext 4xx
59
Chapter 7
Demonstration Guide
60
71. Configuration Example
D P P
L R R
C I I
Ext 301
(for test)
Ext 31X
KX-TDE
with 2 PRI Extension
as ISDN provider
Ext 32X
PRI Adaptor
SIP Trunk (30-ch)
KX-NS1000
KX-NCP
with PRI
Ext 101
Ext 102
CLIP 01234311 CLIP 01234312
PRI
Ext 201
CLIP 01234321
61
72. Outgoing Call
KX-TDE
with 2 PRI Extension
as ISDN provider
D P P
L R R
C I I
Dialing plan
3XX
Ext 301
(for test)
Ext 31X
Ext 32X
DDI 321
Dial 321
(Remove 01234 by ARS)
SIP Trunk (30-ch)
Dial 321
PRI Adaptor
KX-NS1000
KX-NCP
with PRI
PRI
Dial 0/9-01-234-321
DDI
Program
01234311
Ext 101
Ext 102
CLIP 01234311 CLIP 01234312
Ext 201
CLIP 01234321
62
73. Incoming Call
D P P
L R R
C I I
Ext 301
(for test)
Ext 31X
KX-TDE
with 2 PRI Extension
as ISDN provider
Ext 32X
Dial 312
(Remove 01234 by ARS)
DDI 312
PRI Adaptor
DDI 401312
SIP Trunk (30-ch)
KX-NS1000
KX-NCP
with PRI
DDI
Program
01234321
Ext 101
Ext 102
CLIP 01234311 CLIP 01234312
PRI
Dial 0/9-01-234-312
Ext 201
CLIP 01234321
63
74. PRI Extension
Standard LAN cable can be used
by this switch for PRI Extension.
D P P
L R R
C I I
Ext 301
(for test)
Ext 31X
PRI Adaptor
Ext 32X
PRI
64
75. KX-NS1000 – SIP Register Resending
“Register Resending Interval” has to be
10 seconds.
If default value 300 seconds is used, it takes
for 0 to 300 seconds to reconnect KX-NS1000 and
trunk adapter, when trunk adapter returns IN Service
from Out of Service or LAN is reconnected.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
65
Thank you !
The END
66