Transcript PowerPoint 簡報 - ISAC Control System

Update of Control System Plans for the TPS
C. Y. Wu, C.H. Kuo, Jenny Chen, C.J. Wang,
P.C. Chiu, K.H. Wu, Y.S. Cheng, K.T. Hsu
Reported by Chun-Yi Wu
TPS Control Team
NSRRC, Hsinchu, Taiwan
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
Outline
 Overview of TPS project
 Hardware selection of TPS
 Interface standard
 Some subsystems control interface
 Software environment
 Summary
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
2
Taiwan Photon Source Project
Most probably ground breaking: late 2009~2010
TPS Parameters
79H2-new
Circumference C (m)
518.4
Energy E (GeV)
3.0
TLS Booster Synchrotron
TLS Storage Ring
TPS Storage Ring &
Utility-III, Guest
Natural emittance εx0 (nm-rad)
1.6
Revolution period (ns)
1729.2
Revolution frequency (kHz)
578.30
Radiofrequency (MHz)
499.654
Harmonic number h
864
SR loss per turn (dipole) (MeV)
0.85269
Betatron tune νx/νy
26.18 /13.28
Momentum compaction (α1, α2)
2.4×10-4, 2.1×10-3
Natural energy spread σE
8.86×10-4
Damping partition Jx/Jy/Js
0.9977/1.0/ 2.0023
Damping time τx/τy/τs (ms)
12.20/ 12.17 / 6.08
Natural chromaticity ξx/ξy
-75 / -26
Dipole bending radius ρ(m)
8.40338
Booster Synchrotron
Storage Ring Booster
User ADM Center
Scheduled commissioning start in late 2013
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
3
Technical Selection for the TPS Control System
 Control system framework => EPICS toolkit.
 Commitment to the funding agency and budget consideration:
Acquire as many of parts from local vendors as possible
=> Adopt cPCI/PXI, AdvancedTCA, and other embedded solutions
for IOC layer.
 Borrow available resources from other labs.
 Goals of 2009:
Refine control system planning and design.
EPICS IOC test bed.
Timing testbed: MRF’s cPCI EVR/EVR solution
Simemns S7/300 PLC testbed: turnkey from EU (Siemens or VIPA)
Yokogawa M3R PLC testbed with embedded EPICS IOC
Prototype OPI
Database planning
Work out on EPICS driver/devices support for selected hardware
Cultivate EPICS peoples.
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
4
TPS Control System Infrastructure
Consoles
and
Servers
DB Server,
Beam Physics Server,
Alarm Server,
AP Server, … etc.
PC/Linux
Storage Server
Intranet
Control Ethernet
Router
cPCI IOC
aTCA IOC
Soft IOC
PLC-IOC
IOC
(Input
Output
Controller)
Soft IOCs
Signal
Conditioning
- Pentium/XScale/ARM/IXP/IOP Linux
Hard IOCs
- cPCI, aTCA IOCs
- Intel CPU/Linux (fully preemptive kernel )
- Hard real-time
- High volume I/O
- High speed serial connection (GbE, … etc.)
- Soft real-time system
- GPIB/IEEE-488 Instruments
Safety
- RS-232/422/485 Devices
Type
- CCD camera server
System
- PLC (safety type system)
- Bunch-by-bunch feedback system interface
- Special applications
Network attached EPICS Devices
(e.g. EPICS oscilloscope, … etc.)
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
5
Candidates of EPICS IOC - Hardware Building Blocks
CompactPCI IOC
(Linux)
cPCI CPU board
ACQ IOC
(Linux)
aTCA IOC
(Linux)
Intel IOP
+
ADC, DAC
Compute Blade
PLC Embedded EPICS IOC
CompactRIO EPICS IOC
Switch Blade
128 Bits DI/DO
128 Bits DI/DO
Carrier Blade
ADC/DAC
Libera IOC
(Intel XScale. Linux)
BI, BO, AI, AO
EVG
(in study)
EVR
BI, BO, AI, AO,
Timing, Network
attached devices
Adapter
Network attached devices
Scope IOC
(8. 12. 14 bits)
+ Power Supply Controller
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
6
Interface Standard
 cPCI I/O modules
 32/64 channel 24 bits ADC (with transient signal capture capability, D-tACQ))
 16/32 channel 18 bits DAC (D-tACQ)
 128 bit DI, 128 bit DO (ADlink)
 EVG, EVR (cPCI & PMC form factor, MRF)
 In house designed electrical/optical fanout, patch panels
 aTCA crates
system
 Network attached devices
 Fast feedback
 Main
power supply control interface
 GbE interface, waveform support for the booster synchrotron main power
supply
 Small
power supply control interface
 Analogue interface
 Support feedback interface
 Booster energy ramping support (optional)
 Timing
 Event system based upon cPCI EVG/EVR
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
7
Interface Standard – cont.
 Fast waveform capture
 Scope IOC
 Camera
 GigE Vision
 Ethernet and LXI Compliant devices
 Power supply
 Diagnostics
 Electronics instruments, DMM, temperature monitor, ..
 Motion control
 Ethernet based motion controller
 Interlock
 PLC with embedded EPICS IOC
 RS-232C/422/485 devices
 Ethernet to RS-232/422/482 serial device servers or IOC
 Software
 EPICS toolkits
 Miscellaneous Interface
…
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
8
Power Supply Control Interface
 Large (Digital regulator)
 Ethernet interface
 ENOB > 18 bits
 Communication protocol is still pending
 Medium power supply
 Ethernet interface
 ENOB > 18 bits
 Communication protocol is still pending
 Booster synchrotron large and medium power supply
 Ethernet interface with waveform capability
 Small power supply (analogue power supply)
 Analog interface (18 or 24 bits bits)
 cPCI 18 bits DAC (D-TACQ ?)
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
9
Turnkey System Interface
 Many of turnkey systems compliant with EPICS based controls.
 Possible turnkey systems included:
 Linac (contracted out in December 2008)
 RF transmitter (2 sets contracted out in December 2008)
 Outsource insertion devices
 Monochromator and other beamline components
 ………. etc.
 Possible turnkey EPICS devices included:
 BPM electronics, Scope IOC, Motion control solution, …
 Minimize workload of integration and maintenance
 Standard components should be chosen to get consistency of
hardware
 Provide EPICS development environment and documentation
 Follow TPS PV name convention
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
10
Linac System Control Environment
Timing Network
TPS Control Network
EPICS
OPI
TPS Control
Environment
Linac Timing IOC (Linux)
Diagnostic IOCs
(Transient Digitizer,
GigE Vision Camera,… etc.)
+
cPCI IOC
Event Receiver
+
Scope IOCs
+
ACCEL’s EPICS
Soft-IOC
Trigger Signal
Local
Control
Panel
Local
Controller
(PLC, ..etc.)
Gun
cPCI CPU board
Fine delay
+
Fanout
(Electrical, Optical)
Linac Control
Ethernet Switch
Local
Controller
(PLC, ..etc.)
Local
Controller
(PLC, ..etc.)
Local
Controller
(PLC, ..etc.)
Modulator #1
Modulator #2
Modulator #3
Gun grid pulser, Klystron Current/
Voltage, RF, Faraday Cup, Current
Transformer, … etc.
Local
Controller
(PLC, ..etc.)
Power Supply
Local
Controller
(PLC, ..etc.)
Rf
Local
Controller
(PLC, ..etc.)
Vacuum Interlock,…etc.
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
Optical Fiber
Gun Trigger
Linac Timing Box
Linac RF, Diagnostic, …etc
11
Booster Synchrotron Control Environment
Control Network
6 cPCI crates for the TPS booster synchrotron,
One cPCI for one period of the booster lattice
Booster Repetition Rate: 3 Hz
EPICS IOC
ADLINK cPCI CPU
ADLINK 128 Bits DI/DO
TEWS
TCP201
IP Carrier
Hytec IP ADC
16 bits, 16 channels
IP-ADC-8413
Interlock
PLC IOC
Hytec IP DAC
16 bits, 16 channes
IP-DAC-8404
Trigger
Ethernet Switch
register mode
Protocol: MODBUS/TCP or ?
or
waveform mode
Remote I/O solution:
MODBUS/TCP
Galil RIO-47120 Pocket PLCs
Booster Correctors for one Cell
Power Supply Crate
Hor: 10 sets
Vert: 6 sets
(waveform capability)
Miscellaneous Control
(Vacuum, ambient parameters, …)
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
QM
PS
Dipole
PS
Q2
PS
QF
PS
Q1
PS
12
Miscellaneous System Interface
 Vacuum system
 BI, BO, AI, AO, serial links, ..etc.
 Diagnostics
 BPM electronics: Ethernet.
 BI, BO, AI, AO, counter
 Machine protection
 Dedicated PLC system with fast link
 Ethernet to control system.
 Personnel protection
 Dedicated PLC system with fast link
 Ethernet to control system.
 Feedback system interface
…
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
13
Post-mortem Diagnostic Supports
 BPM electronics:
 Post-mortem buffer (turn-by-turn)
 Dedicated fast data capture nodes to capture for more than
5 seconds at 10 kHz rate.
 cPCI ADC module with post-mortem buffer:
 Up to 10 msec time resolution for more than 5 seconds.
 Transient and waveform diagnostic:
 High timing resolution (~ nsec) with segmented sweep
 multiple-trigger capability
 Beam trip trigger is planned to distribute via event system.
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
14
Software Environment
 Control system framework:
 EPICS toolkits
 High level physics applications:
 Matlab/Accelerator Toolkit/Matlab Middle Layer
 Setup virtual accelerator to support high level application
development is underway
 Many items are still in study
 Relation database
 Technical system interface
 Documentation, E-log
 Machine status broadcasting: web, IPTV
 …etc.
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
15
High Level Applications Interface
High Level Matlab Applications
(scripts and functions)
EPICS Client
Matlab Middle Layer
Matlab to EPICS
(LabCA)
Accelerator Toolbox (AT)
(Model)
MML
switch2hw
switch2physics
VA EPICS IOC
Channel Access to
Accelerator Hardware
EPICS Process
Database
Dipole Quad
EPICS Process
Database
Dipole
Quad
Sext.
Corr.
BPM
Sext.
Corr.
BPM
RF
RF
Thanks help form G. Rhem and
J. Roland (DLS), G. Portmann
(ALS)
Lattice File
AT
Virtual TPS Storage Ring IOC
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
16
Virtual Accelerator for Applications Development and Training
 To enable early testing of applications through the control system, a virtual
accelerator has been implemented to give simulation of the accelerators though
the intended EPICS PV interface. Prototype was set up by the help from DLS.
 Current version is AT/MML version.
 Virtual booster and linac are also possible near future!
 Many facility have such kinds activities: SNS, KEK, J-PARC, DLS, … many
others!
Virtual TPS Storage Ring
TPS Storage Ring
(Lattice designed by
BD Group)
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
17
EPICS Practices at the TLS
Control Console
Control Console
Control Console
EPICS
OPIs and Clients
TLS Control Network
140.110.202.xx
broadcast EPICS
Hor FOFB Vert FOFB
Corrector
Corrector
Control
Control
Gateway
ILC10
to
TLS ILC
database
RM
Network
Data Acq
Node #1
GigE Link
Diagnostic
Node
GigE Link
Libera
Brilliance
X 59
R1 BPM (10)
ILC12
VME RM
Slow Corrector
Control Node
Matlab
LabCA
ILC
ILC
ILC
Router
TPS Control System
Development Network
EPICS
CSPI Interface
SA Ethernet Switch
192.168.1.xx
+
Superconducting
IDs post-mortem
digitizer (EPICS)
(Multi-Gigabit Link)
iGP EPICS interface
R2 BPM (10) R3 BPM (11) R4 BPM (10) R5 BPM (10) R6 BPM (8)
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
18
Works in Proceed
 Cultivate EPICS peoples.
 Define standard hardware, work out on EPICS Device/driver supports.
 Define software standard (EPICS toolkit).
 Planning for various issues (name convention, networking, …).
 Setup testbed in 2009:
Training system
BPM system for TLS (gateway to TLS control system)
Transient and waveform IOC
Scope IOC
GigE vision supports
Various EPICS clients applications
RDBMS
OPI
 Work out a solid plans for the TPS control system:
Procurement schdeule
Development schedule
Priority
Limited budget, limited manpower, …
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
19
Works in Proceed
EPICS Oscilloscope EDM page
cPCI IOC DAC Waveform Supports
EVG Configuration EDM page
EVR Configuration EDM page
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
20
Summary
 The design of the TPS control system is on going.
 All major components for control system are in intensive study.
 Standardization hardware and software are the current focus.
 EPICS toolkit training - a series training activities will be arranged.
 Set up EPICS test-bed
 Single kind of operating system solution for IOCs and consoles are preferred
=> Linux.
 Economic design without scarify performances and reliability are the goals.
 Select possible outsourcing items
 Learn experiences from other labs
Thank you for helps from EPICS community!
The Spring 2009 EPICS Meeting, Vancouver, B.C., Canada, April 30-May 2, 2009
21