Samsung_FAQ_0508

Download Report

Transcript Samsung_FAQ_0508

FAQ
Frequently Asked Questions
Hot Keys for SHR-204X
Please press the buttons for more than 5 seconds. Then you will hear beep sound.
HDD Format and Reset to Factory Default
MODE + 4 + ZOOM
Reset to Factory Default
MODE + 2
Video Output switching (Composite ↔ VGA)
MODE + 1
Hot Keys for SHR-208X/216X/508X/516X
Please press the buttons for more than 5 seconds. Then you will hear beep sound.
HDD Format and Reset to Factory Default
MODE + FREEZE + MENU
Reset to Factory Default
MODE + PTZ
Video Output switching (Composite ↔ VGA)
MODE + ZOOM
How to enter Menu Setup without password for SHR-504X
1) Press MENU button
2) You can see User Login display
3) Press STOP → 4 → 3 → 2 → 1 → STOP buttons one by one
4) Then, you can enter the MENU Setup page
Where is Load Factory Default item in SHR-504X MENU?
Please go to MENU > System > Profile > Load Factory Default.
How to upgrade if SHR DVR is older than V2.16?
-
V2.16 or older : current version → v2.17 → the newest version
-
V2.19 or newer : current version → the newest version
V2.17 is a temporal version for easy upgrading.
Before we released v2.17, you have to upgrade bios, zImage and jffs files by serial cable.
But it’s not easy and kind of bothersome so we improved upgrading method so that customers
can easily upgrading above all 3 files by USB memory or network at one go.
Can I change the file name for upgrading?
Please do NOT change the file name for upgrading.
Please keep it as original name,
for example, “shr-5162-pkg(B3.09)(K1.55)_V2.25_0803061721.tgz”.
SHR Series do not support renaming of *.tgz file.
How to upgrade SHR-504X via USB thumb drive
When you download SHR-504X firmware from our website, it’s a zip file.
In the zip file, there are 3 folders.
Folder name
Language
esinfg
English, Spanish, Italian, Dutch, French, German
ecprcb
English, Czech, Polish, Russian, Croatian, Portuguese
kjedst
Korean, Japanese, English, Danish, Swedish, Turkish
Please use the firmware in a folder including language you want to use.
1) Create folder named “update” in your USB memory
2) Save the firmware from a folder including the language you want to use
into “update” folder
3) Connect USB memory to SHR-504X
4) Go to MENU > System > System Information & Setup
5) Press “Package Search” button to search a proper firmware
6) Press “Upgrade” button when Upgrade Version is displayed
How many HDDs can be installed additionally?
Default HDD
Additional HDDs
SHR-5040
160GB
+1EA
SHR-5042
250GB
-
SHR-5080
250GB
+3EA
SHR-5082
250GB
+2EA
SHR-5160
250GB
+3EA
SHR-5162
250GB
+2EA
SHR-2040
160GB
+1EA
SHR-2042
160GB
+2EA
SHR-2080
160GB
+3EA
SHR-2082
160GB
+2EA
SHR-2160
160GB
+3EA
SHR-2162
160GB
+2EA
* By the recommend device list v3.5, up to 750GB each HDD can be installed.
How to make URL with MAC address
When the unit is set to use Samsung DDNS, the basic URL is as following.
MAC Address
URL address
00-00-F0-ab-cd-ef
http://nabcdef.websamsung.net
00-16-6C-ab-cd-ef
http://mabcdef.websamsung.net
00-68-36-ab-cd-ef
http://pabcdef.websamsung.net
How many simultaneous users can be connected via network?
Model
Max. number of users
SHR-2XXX
3 users (1 ADMIN and 2 USERs)
SHR-504X
4 users (regardless of admin or user)
SHR-508X/516X
3 users (1 ADMIN and 2 USERs)
How often does SHR Series check if the IP address has
Changed and inform the DDNS service?
Every 10 minutes, SHR Series is checking if the IP address is changed and
inform the information to the DDNS site.
But some DDNS block it because 10 minutes is too much frequent for them.
So, we recommend to use Samsung DDNS.
What is the maximum searching speed of SHR Series
by network?
From SmartViewer V2.095 and SHR-2XXX/508X/516X V2.25,
Searching speed has been increased up to x64.
For SHR-504X, up to x32 is available.
Windows Vista is compatible with DVR?
Model
Support
Version
WebViewer of SHR-504X
Supported
From v1.3
WebViewer of SHR-508X/516X
Supported
From v1.0
SmartViewer
Supported
From v2.09
NetI
Supported
From v1.0
SPR Series PC based DVR
Supported
From v3.1 P4
SHR-5XXX WebViewer can be connected via Macintosh, Safari
or FireFox?
We guarantee that SHR-5XXX webviewer works on Windows Vista/XP only.
It is unfortunate that it may not work and we can not guarantee normal
operation on Macintosh, Safari or FireFox.
Model
Compatible OS
WebViewer of SHR-5XXX
Windows XP/Vista
SmartViewer
Windows 2000/XP/Vista
NetI
Windows XP/Vista
Can I use different user levels when I connect via Network?
Multi-user level (User1~User5) and its different authority settings of
SHR-2XXX/5XXX Series are for the DVR unit itself.
These configurations are not applied to WebViewer, SmartViewer and NetI.
For network access, there are only ADMIN and USER.
You can configure the password for them from
MENU > Network > IP Settings > Admin Password / User Password.
If you logon by USER permission, you will not have the rights to control
search, PTZ, … an so on..
It is regretted that it can not be applied to SHR-2XXX and SHR-5XXX Series
due to its CPU performance limitation.
Our next new SHR Series (SHR-7XXX/8XXX) will adopt login feature as it is
saved in DVR unit. (additional local logins will be same as network logins)
Some SHR-504X menu configurations are impossible to setup!
With "Show device page" of NetI Setup Tool, you can setup some limited configuration of
SHR-504X. Some items are impossible to set up.
At the very beginning on opening the device page, all items are displayed, but some
items(which is impossible to set up) turn to disabled when metadata values are transmitted
completely.
1) Resource
- Camera : Brightness, Contrast, Hue are possible to set up.
- PTZ : Model, BPS, Address are impossible to set up, but only are allowed to display setup value.
2) Recording
- Record Setup : FrameRate, Quality, Resolution, EventRecordFrame(Alarm Rec Setup) are possible to set
up.
- Recording Schedule: Possible to setup.
3) Event
- Motion Detection : Motion Detection Area, Sensitivity, Beep, Linked Alarm Out are possible to set up.
- Alarm In : Linked Camera, Linked Alarm Out are possible to set up.
4) Network
- Connection : IPAddress, SubnetMask, Gateway, PrimaryDNS, SecondaryDNS are only allowed to be
displayed setup value.
- Stream Control : FrameRate, Resolution, Quality are possible to set up.
5) System
- Date Time : Date Time is only allowed to Display.
- Time Zone and Time Server is only allowed to display Disable condition and not possible to display setup
value.
AVI backup file is not playable by Windows Media Player!
For playing AVI file, a proper codec is needed as following.
You can use the free version.
Model
Codec
SHR-504X
K-lite
SHR-2XXX/508X/516X
Divx
It can be found on ..
http://www.freecodecs.com/K_Lite_Codec_Pack_download.htm
http://www.divx.com/divx/windows/download/index.php
What is the maximum size SHR-504X can make a backup to
external USB-HDD?
In case of USB-HDD backup, HDD should be formatted by PC.
If an external HDD has not been formatted as FAT32, SHR-504X can not
recognize it (it is a character of linux itself..)
With FAT32, supported HDD is max. 150GB.
Even if you make partitions using FAT32, only one partition can be used.
What the resolution of VGA monitor output of SHR Series?
Model
VGA resolution
SHR-2XXX
752 x 586 @ 50Hz
SHR-504X
640 x 480 @ 60Hz
VGA/Composite Dual Out
720 x 576 @ 50Hz
Composite Only
720 x 576 @ 50Hz
VGA Only
640 x 480 @ 60Hz
SHR-508X/516X
Is AVI backup file from SHR Series watermarked?
While recording, SHR Series let watermark information included.
So, AVI backup data is watermarked.
Password Reset for SPR Series PC based DVR
Please delete “SPR Smart Viewer.ini” file in C:\Windows folder.
Then new create window will popup.
You can put new password.
Configuration backup for SPR Series
1) In Live mode, press Alt + Ctrl + Shift + F4 in order to exit SPR Smart View
2) Please go to C:\SPR Smart View
3) Copy the SETUPD
4) Paste it to other SPR Series machine
※ Do not mix the files from different model
5) Reboot
What 3rd party protocols supported by Smart Domes?
Smart Dome Cameras supports 3rd party protocols as following.
: Vicon, Panasonic, Philips, Pelco-P, Pelco-D, Kalatel, Erna, Diamond, VCLTP
For the detail description how to set up 3rd party protocols,
Please refer to “PROTOCOL Function Table (V1.5).pdf” document.
Diamond and Erna protocols can NOT handle address zero.
So, if you set protocol as Diamond or Erna, please set address as one or upper one.
How to reset to factory default of Smart Domes
Press [Preset] + [1] + [5] + [0] + [Enter] by System Keyboard or ControlX.
How to reset to factory default of SSC-2000
1) Power OFF
2) Press MENU and ENTER buttons together and power ON
3) Keep pressing buttons until beep sounds
4) After beep sounds, SSC-2000 will reset all configurations to the factory default
How to make logout of SSC-2000
Press PRESET and ALARM RESET buttons together for more than 3 seconds.
Then it return to the login display.
What is the operating life time for TFT LCD lamp?
The minimum operating life time for LCD monitor is 50,000 hours.
“Wrong user ID” error while registering DVR by NetI
You have to put the ID as a capital letter (ex, ADMIN or USER)
Then it will work.