Transcript controller - GENI Wiki

Using OpenFlow and Orbit to
Achieve Mobility in a
Heterogeneous Wireless Network
Ryan Izard
[email protected]
GREE-SC2014
Iowa State University
Sponsored by the National Science Foundation
Outline
1. A brief overview of software defined
networking (SDN) and OpenFlow (OF)
2. OF controller and OF switch software
components and interaction
3. The Floodlight (FL) OF controller
4. Achieving IP Mobility with OF
5. Tutorial / Walk-through
Sponsored by the National Science Foundation
GREESC2014
2
What is Software Defined
Networking and OpenFlow?
Sponsored by the National Science Foundation
GREESC2014
3
What is SDN?
• Physical separation of network control plane
from forwarding/data plane
• Network control
– Centrally managed
– Directly programmable
• Network infrastructure
– Abstracted from applications
Sponsored by the National Science Foundation
GREESC2014
4
How Does SDN Work?
API Feature A
API Feature B
API Feature C
Network Operating System
Packet Forwarding
Packet Forwarding
Packet Forwarding
Packet Forwarding
Packet Forwarding
Sponsored by the National Science Foundation
GREESC2014
5
What Is OpenFlow?
• Link between SDN
control and
infrastructure layers
• OF-enabled
infrastructure
communicates with
an OF controller via
the OF protocol
Sponsored by the National Science Foundation
GREESC2014
6
How Does OF Work?
User Applications
Network Services
Custom Services
APIs
OpenFlow Controller
Packet Forwarding
Packet Forwarding
Packet Forwarding
Packet Forwarding
Packet Forwarding
Sponsored by the National Science Foundation
GREESC2014
7
Basic SDN
packet handling
example
Sponsored by the National Science Foundation
GREESC2014
8
Basic SDN
packet handling
example
User 1
Sponsored by the National Science Foundation
User 2
GREESC2014
9
Basic SDN
packet handling
example
User 1
Sponsored by the National Science Foundation
User 2
GREESC2014
10
OpenFlow Switches and
Controllers
Sponsored by the National Science Foundation
GREESC2014
11
time
Bottom-Up: An OF-Enabled Switch
1. Power On
2. Bootloader
3. OF-Enabled OS
Control Path
OpenFlow
Data Path / Switching Hardware
Flow Table
Sponsored by the National Science Foundation
GREESC2014
12
OF Switch Connection to Controller
Network Services
Custom Services
APIs
OpenFlow Controller (e.g. Floodlight, NOX, etc.)
OS (e.g. Linux, Mac, Windows, etc.)
Hardware
Control Path
OpenFlow
Data Path / Switching Hardware
Flow Table
Sponsored by the National Science Foundation
GREESC2014
13
OF Switch Connection to Controller
• Switch probes for controller
– Configured with controller IP/port (6633/6653)
– Connection established via TCP/TLS
– Standalone or secure modes
• Controller can learn topology
– Packet-out LLDP
– Devices and other participating OF switches
discovered and mapped
Sponsored by the National Science Foundation
GREESC2014
14
Application Connection to Controller
Application Requesting Controller Service(s)
Interface to Controller (e.g. REST)
OS (e.g. Linux, Mac, Windows, etc.)
Hardware
Network Services
Custom Services
APIs
OpenFlow Controller (e.g. Floodlight, NOX, etc.)
OS (e.g. Linux, Mac, Windows, etc.)
Hardware
Sponsored by the National Science Foundation
GREESC2014
15
Application Connection to Controller
• Controller-dependent
• Floodlight provides REST API
– JSON
– Modify or query running configuration
– Expandable with custom modules
• Options are vast with open-source
– Customize controller APIs and behavior
– User-application-independent (e.g. a transparent
network service like SOS)
Sponsored by the National Science Foundation
GREESC2014
16
The Floodlight OpenFlow Controller
• Open-source OF controller
• Sponsored and supported
by Big Switch Networks
• Written in Java and easily
used with Eclipse
• Modifiable and
expandable to suit any
application via modules
• Large developer
community and support
group
Sponsored by the National Science Foundation
GREESC2014
17
Floodlight Modules
• What is a Floodlight (FL) module?
– FL service that reacts to switch/controller
events, manages running switches, and/or
manages controller configuration
– Java package
– FL ships with many modules, but custom
modules are supported
• Modules can work collaboratively and be
chained to achieve desired results
Sponsored by the National Science Foundation
GREESC2014
18
time
Floodlight Architecture
1.
2.
3.
4.
5.
Execute
Parse module list
Load modules
Start REST service
Start FL Provider
Service (Core)
FL Modules (e.g. Forwarding, DHCP, Your_Module, etc.)
FL Provider Service
Sponsored by the National Science Foundation
GREESC2014
REST Service
19
Floodlight Architecture
Sponsored by the National Science Foundation
GREESC2014
20
Customizing Floodlight Behavior
• Off-the-shelf, the FL controller mimics
traditional learning switch behavior for all
connected switches
• Custom modules allow for advanced SDN
applications/behaviors
– SOS, HetNet Mobility, GENI Cinema, etc.
– Add your custom modules here too!
• REST API allows third party apps to query
and modify the running configuration of FL
Sponsored by the National Science Foundation
GREESC2014
21
How can Software Defined
Networking and OpenFlow
be Used to Achieve a
Vertical Handover?
Sponsored by the National Science Foundation
GREESC2014
22
• Part I: Design/Setup
– Use OpenFlow to perform L2 handoff
• Part II: Execute
– Configure and initialize software and scripts
– Execute handoff experiment
• Part III: Finish
– Determine results
– Kill processes
– Shutdown node and logout
Sponsored by the National Science Foundation
GREESC2014
23
Mobility Over
Heterogeneous Networks
• Provide mobility for clients over IPv4
• Entirely SDN and OF-based solution
– Network-level
• Migration detection
• IP address assignment and management
• Packet routing
– Client-level
• Packet routing
• Interface switching
• Transparent service to application
Sponsored by the National Science Foundation
GREESC2014
24
Mobility Over
Heterogeneous Networks
• Network-Level, Mobile IP:
– Home/Foreign Agents OpenFlow Controller
– Mobile IP tunnels OpenFlow flows
– DHCP server on OpenFlow controller
• Client-Level, Vertical Handoff:
– Change physical interface  broken socket
– Open vSwitch + Floodlight OF controller
• Manage the physical interfaces via SDN
• End-user sees “always-up” virtual interface
Sponsored by the National Science Foundation
GREESC2014
25
Client Connects to WiMAX
Client-Level
Sponsored by the National Science Foundation
GREESC2014
26
Client Connects to WiMAX
Network-Level
Sponsored by the National Science Foundation
GREESC2014
27
Client Uses WiMAX Network
Network-Level
Sponsored by the National Science Foundation
GREESC2014
28
Client Migrates
Network-Level
Sponsored by the National Science Foundation
GREESC2014
29
Client Switches to WiFi Interface
Client-Level
Sponsored by the National Science Foundation
GREESC2014
30
Network Responds to Handover
Network-Level
Sponsored by the National Science Foundation
GREESC2014
31
Client Connection Rerouted to WiFi
Network-Level
Sponsored by the National Science Foundation
GREESC2014
32
Client-Level
Sponsored by the National Science Foundation
Mobility Over
Heterogeneous Networks
GREESC2014
33
Sponsored by the National Science Foundation
GREESC2014
34
Sponsored by the National Science Foundation
GREESC2014
35
• Part I: Design/Setup
– Use OpenFlow to perform L2 handoff
• Part II: Execute
– Configure and initialize software and
scripts
– Execute handoff experiment
• Part III: Finish
– Determine results
– Kill processes
– Shutdown node and logout
Sponsored by the National Science Foundation
GREESC2014
36
Configure Experiment
• Experiment is a simple ping to demonstrate a vertical
handoff between a WiFi and a WiMAX interface on a
node in the Orbit grid testbed
• Detailed instructions:
– http://groups.geni.net/geni/wiki/GENIExperimenter/Tutorials/
WiMAXOpenFlow
• GREE-SC2014 group and node assignments:
– http://tinyurl.com/greesc2014-d7-node-info
Sponsored by the National Science Foundation
GREESC2014
37
Configure Experiment
• Enable WiMAX for your GENI project
–
–
–
–
–
Login to GENI at portal.geni.net
Scroll down to the Tools section and select WiMAX
Select the button to enable WiMAX for your project (GREESC14)
Click Submit
Note your username
Sponsored by the National Science Foundation
GREESC2014
38
Configure Experiment
• You should be able to login to the Orbit testbed
for your project
– eval `ssh-agent –s`
– ssh-add /path/to/private/key
• Open two separate terminal windows and
in each SSH to Orbit
– ssh [email protected]
Sponsored by the National Science Foundation
GREESC2014
39
Configure Experiment
•
Load AP image onto node
– omf load -o 1200 -i rizard-greesc2014ap.ndz -t node11-11
•
Load Server image onto node
– omf load -o 1200 -i rizard-greesc2014server.ndz -t node10-10
•
Load Client image onto node
– omf load -o 1200 -i rizard-greesc2014client.ndz -t <client-node>
•
Power off and boot nodes
– omf tell -a offh -t node11-11,node1010,<client-node>
– omf tell -a on -t node11-11,node1010,<client-node>
Sponsored by the National Science Foundation
GREESC2014
40
Configure Experiment
•
Setup AP node (Already done for GREE-SC2014)
– ssh root@node11-11
– Start: ./gec20_setup_ap.sh
•
Setup Server node (Already done for GREE-SC2014)
– ssh root@node10-10
– Start: ./StartupScripts/gec20_setup.sh
– ARP: ./StartupScripts/arp_add_list.sh
•
Setup Client node – Your Turn!
– ssh root@<client-node>
– Disable Floodlight’s forwarding module
– Configure startup and switching scripts
– Start: ./StartupScripts/gec20_setup.sh
Sponsored by the National Science Foundation
GREESC2014
41
• Part I: Design/Setup
– Use OpenFlow to perform L2 handoff
• Part II: Execute
– Configure and initialize software and scripts
– Execute handoff experiment
• Part III: Finish
– Determine results
– Kill processes
– Shutdown node and logout
Sponsored by the National Science Foundation
GREESC2014
42
Execute Experiment
1) WiFi flows are installed as “initial flows” when setup
script is run.
2) In a new terminal, start a ping to the server IP,
10.41.105.105. The packets will be switched out the
WiFi interface.
3) Run the WiMAX switching script. The ping packets will
be switched out the WiMAX interface.
./SwitchingScripts/gec20_switch_to_wimax.sh
4) You’ve performed a handoff! Want proof? View the
flows and packet counts on each OVS bridge before
and after an interface-switch.
5) Alternate inferfaces and switch back to WiFi.
./SwitchingScripts/gec20_switch_to_wifi.sh
Sponsored by the National Science Foundation
GREESC2014
43
• Part I: Design/Setup
– Use OpenFlow to perform L2 handoff
• Part II: Execute
– Configure and initialize software and scripts
– Execute handoff experiment
• Part III: Finish
– Determine results
– Kill processes
– Shutdown node and logout
Sponsored by the National Science Foundation
GREESC2014
44
Teardown Experiment
• When the experiment is done, on the Client
node stop the Floodlight controller, stop OVS:
./StartupScripts/gec20_teardown.sh
• On the Server node:
./StartupScripts/gec20_teardown.sh
• Exit all SSH connections to nodes and power off
resources:
omf tell -a offh -t all
• Exit Orbit console SSH connections.
Sponsored by the National Science Foundation
GREESC2014
45