Transcript Ultra-high resolution

Roman Architecture: Ultra-High Resolution version
This presentation does not automatically run. At anytime during
this presentation you may advance forward with the right arrow
() or go back with the left arrow (). You may also navigate with
the links at the top of each page.
Basics
Aqueducts
Baths
Arches,etc.
Intro
Roman architecture stands today as a testament to the ability and grandeur of this once great civilization that ,at one time, covered
three continents. The common style of architecture formed a thread that helped keep the vast Roman empire connected. Their great
theaters and amphitheaters were wonders that could seat thousands of people and are still impressive,both in size and volume, today.
Their development of the arch and concrete influenced architecture for centuries to come.
Basics about Roman Architecture
The Romans adopted the external language of classical Greek architecture for their own purposes, which were so different from Greek
buildings as to create a new architectural style. The two styles are often considered one body of classical architecture. Sometimes that
approach is productive, and sometimes it hinders understanding by causing us to judge Roman buildings by Greek standards.
The architecture of Classical Greece and Rome did not come about all at once, but came in different stages of design and style. There
were five different types that the Romans and Greeks used throughout classical times, from pre 500 BC to the first century AD.
Basic Architectural Styles
Doric Style - Columns built in this style usually had no base and consisted of a massive shaft with 20 flutes. Doric architecture
predates the 5th century BC. It was infrequently used, but examples are seen in the Parthenon (see above) and Colosseum in Rome.
Later Roman columns differ from the Greek version in their addition of a base and changes in the capital profile.
Ionic Style - More visibly complex than that of the Doric style, being of slender proportion, and their height being generally about
nine times the column's lower diameter; the order is always used with a base and the column shaft usually has 24 flutings.
Corinthian Style - This is the most ornate of the classical styles and is generally much more slender than the Ionic style. The
Romans used the Corinthian order in numerous monumental works of imperial architecture. They gave it a special base, made
carved additions to the cornice, and created numerous capital variations, utilizing florid leafage and sometimes human and animal
figures. The prevailing form of Roman Corinthian is seen in the Maison Carrée in Nimes, France (see picture to right). This style
originated after the 5th century BC.
Tuscan Column - The Tuscan column was the next form to be introduced and it was introduced by the Etruscans. The Tuscan
Column is a very simple, plain column with a base and non-fluted shaft. No major examples of this architectural type survive today.
Composite Order - The final architectural type to come from the classical world is the Composite order and it was first seen in 82
AD on the arch of Titus. The Composite form is a combination of Ionic and Corinthian orders. This form was the most complex due to
the fact that it used the arch. Due to the advances of the Composite style of architecture and the skill that the Romans had with
concrete, the Romans were able to develop such architectural marvels like the arch ,the vault and the dome. One of the most
famous domed buildings to come from the ancient Romans was the Pantheon built in the last century BC by Marcus Agrippa and
later refurbished by Hadrian. This building was originally built as a temple to all the Roman gods but was later converted into a
Christian temple. This building has the honor of being the oldest ,and largest, free standing dome in history.
Examples of Roman Architecture
Aqueducts
Basics
Aqueducts
Baths
Arches,etc.
The Roman development of the arch also led to the building of the great aqueducts for which were used to transport great
amounts of water over vast miles of land. The need for aqueducts occurred in Rome during the mid republic due to the fact that
the Tiber river had gotten too muddy and polluted from waste dumping and other deeds. As time went on, numerous aqueducts
were built in Rome and throughout the empire in general.
The early Roman aqueducts consisted of plain stone slabs and earth lime mixtures. The style and sophistication of aqueducts
evolved as time went on. Because of the Roman Aqueduct, the public baths and water fountains were kept operational due to the
abundant access to fresh water. The result of this was the easy access to people of all classes to fresh water and bath facilities
which set a sanitary standard that would not be met until the 19th century.
To transport the water over great distances, the Roman Aqueduct worked with the principals of gravity and they also had special
basins between the source and the destination that would help purify the water. Once the water had reached the destination, it
was kept into a storage tank where it would be distributed by pipes to different locations at the city. Some lucky upper class
people had water piped directly to their residence ,the earliest known form of a sophisticated pipe system.
By the end of the Western Roman empire, the city of Rome had many prominent aqueducts within her boundaries. The most
notable of these aqueducts are the Aqua Appia ,the first Roman aqueduct, and the Aqua Claudia, built by the emperor Claudius
and would remain one of the largest in the city.In the empire,when times were strained,some emperors chose to simply improve
on existing aqueducts rather than construct new ones.
Though the Romans were not the first to have a mass water system, the Greeks had water pumps in the cities, their system is
important because it was the first time water was available to everyone on such a mass scale. When the western empire did fall,
so fell her complex and ingenious water system. With no engineers or funds to maintain them, the aqueducts ,like everything else
Roman fell prey to the barbarians of the middle ages.
Perhaps the most well preserved aqueduct is Pont du Gard near Nimes, France (pictured left).
Basics
Aqueducts
Baths
With the water system that the Aqueduct allowed, the Roman public baths got more sophisticated and
grew in size as time went on. By the second century AD, public baths had grown in size and variety.
In these new facilities, the pampered could do everything from eat to exercise and even read.
Under such famous emperors as Titus, Caracalla and Diocletion, magnificent baths were constructed
that could house thousands of people at a single time. These later baths were constructed in different
sections. Upon entrance into the bath house, the patron would first enter a changing room in which
they would undress themselves before continuing into the exercise room. After a period of exercise,
the patron would then go to the warm baths,in the tepidarium, then to the clod baths, in the
frigidarium. After their bath, the patron could have a massage if he/she wished so.
What makes the Roman bath houses such an architectural and engineering wonder, other than their
great size, is the system that the Romans had for maintaining them. In the cold and hot areas of the
bath, the water temperature was actually regulated by the use of underground fire furnaces. Also, the
dirty water in the baths was actually drained and replaced regularly. The bath house also had a
hookup to the complex Roman water system and so always had an ample source of water, for both
bathing in and for drinking. The great sanitary conditions of the bath house were major factors that
helped to make the Roman empire the cleanest society up until the 19th century.
Some of the most famous Roman Bath's that still exist are in Bath, England (pictured) and BadenBaden, Germany.
Baths
Arches,etc.
Basics
Aqueducts
Baths
Arches,etc.
Arches, Ampitheaters and Monuments
The grand public structures that the Romans left are the greatest legacy to their once great empire. Their great amphitheaters and monuments, such as
the triumphal arch, were great structures that were a marvel to the Romans and are still a marvel to us today.
The Roman Amphitheater, like most styles of buildings, was influenced greatly by the Greek civilization. These structures were generally circular and
used the arch as their style of building but some were known to be built into a mountain or hillside. The theaters and amphitheaters were quite big in size
and could hold upwards of 50,000 spectators. The biggest, and most famous, Roman amphitheater was the Coliseum (see picture to right) which was
built by the Flavian emperors Vespasian and Titus. This building was used for everything from mock sea battles to to gladiatorial fights. A special fact
about the Coliseum is that it was originally built with a huge removable canopy to protect the spectators from the elements.
The great monuments that the Romans leave behind show a great skill and an admiration for the accomplishments of their leaders and the grandeur of
their empire. Most Roman monuments were constructed using the arch and had the details carved into them. The arch was usually very big and was a
prominent feature of the skyline of the town in which it was located.