Transcript WRITING AP EQUATIONS AP equation sets are found in the free

WRITING AP EQUATIONS
AP equation sets are found in the freeresponse section of the AP test. You are
given eight equations and you must
choose to answer five of these. The
equations are of mixed types. The
section is worth 15 points and is 15 % of
the free response grade. Free response is
55% of the total AP test grade.
All AP equations "work". In each case, a
reaction will occur. These equations
need to be written in net ionic form. All
spectator ions must be left out and all
ions must be written in ionic form. All
molecular substances and insoluble
compounds must be written together (not
ionized!). Know your solubility rules!!!
Ca(OH)2 and Sr(OH)2 are moderately
soluble and can be written together or as
ions. Ba(OH)2 is soluble and Mg(OH)2 is
insoluble. CaSO4 and SrSO4 are
moderately soluble and can be written
together or as ions.
Weak electrolytes, such as acetic acid,
are not ionized. Solids and pure liquids
are written together, also. A saturated
solution is written in ionic form while a
suspension is written together.
AP equations do not need to be
balanced. Don't waste your time
on balancing!
Each equation is worth a total of 3
points. One point is given for the correct
reactants and two points for all correct
products. If a reaction has three products,
one point is given for two correct
products and two points for all correct
products. Leaving in the spectator ions
will result in one point deduction on the
equation set (not 1 point per problem).
The best way to prepare for the equation
section of the AP test is to practice lots
of equations. The equation sets are
similar and some equations show up year
after year. Save the reactions that you
write and practice them again before the
AP test in May.
When you are reading an equation, first
try to classify it by type. If it says
anything about acidic or basic solution, it
is redox. If you are totally stuck, look up
the compounds in the index of your book
or other reference books and try to find
information that will help you with the
equation. All reactions do not fit neatly
into the five types of reactions that you
learned in Chemistry I.
Double Replacement
(metathesis)
Two compounds react to form two new
compounds. No changes in oxidation
numbers occur. All double replacement
reactions must have a "driving force"
that removes a pair of ions from solution.
Formation of a precipitate: A
precipitate is an insoluble substance
formed by the reaction of two aqueous
substances. Two ions bond together so
strongly that water can not pull them
apart. You must know your solubility
rules to write these net ionic equations!
Ex. Solutions of silver nitrate
and lithium bromide are mixed.
AgNO3(aq) + LiBr(aq) --> AgBr(s) + LiNO3(aq)
Ag+ + NO3- + Li+ + Br- --> AgBr + Li+ +NO3Ag+ + NO3- + Li+ + Br- --> AgBr + Li+ +NO3Ag+ + Br-  AgBr
Formation of a gas: Gases may form
directly in a double replacement reaction
or can form from the decomposition of a
product such as H2CO3 or H2SO3.
Ex. Excess hydrochloric acid solution is
added to a solution of potassium sulfite.
HCl(aq) + K2SO3(aq) -->
H2SO3 H2O(l) + SO2(g) + KCl(aq)
H+ + Cl- + K+ + SO32- --> H2O + SO2 + K+ + Cl-
H+ + Cl- + K+ + SO32- --> H2O + SO2 + K+ + ClH+ + SO32-  H2O + SO2
Ex. A solution of sodium hydroxide is
added to a solution of ammonium chloride.
NaOH(aq) + NH4Cl(aq) -->
NaCl(aq) + NH4OH NH3(g) + H2O(l)
Na+ + OH- + NH4+ + Cl- -->
Na+ + Cl- + NH3 + H2O
Na+ + OH- + NH4+ + Cl- -->
Na+ + Cl- + NH3 + H2O
OH- + NH4+  NH3 + H2O
Formation of a molecular substance:
When a molecular substance such as
water or acetic acid is formed, ions are
removed from solution and the reaction
"works".
Ex. Dilute solutions of lithium
hydroxide and hydrobromic acid are
mixed.
LiOH(aq) + HBr(aq) --> LiBr(aq) +H2O(l)
Li+ + OH- + H+ + Br- --> Li+ +Br- + H2O
Li+ + OH- + H+ + Br- --> Li+ +Br- + H2O
OH- + H+  H2O
(HBr, HCl, and HI are strong acids)
Ex. Gaseous hydrofluoric acid
reacts with solid silicon dioxide.
HF(g) + SiO2(s) -->
SiF4(g) + H2O(l)
HF + SiO2  SiF4 + H2O
HF + SiO2  SiF4 + H2O
Single Replacement
Reaction where one element
displaces another in a compound.
One element is oxidized and
another is reduced.
A + BC  B + AC
Active metals replace less active
metals or hydrogen from their
compounds in aqueous solution.
Use an activity series or a reduction
potential table to determine activity. The
more easily oxidized metal replaces the
less easily oxidized metal. The metal
with the most negative reduction
potential will be the most active.
Ex. Magnesium turnings are added
to a solution of iron(III) chloride.
Mg(s) + FeCl3(aq) -->Fe(s) + MgCl2(aq)
Mg + Fe3+ + Cl- --> Fe + Mg2+ + ClMg + Fe3+ + Cl- --> Fe + Mg2+ + ClMg + Fe3+  Fe + Mg2+
Ex. Sodium is added to water.
Na(s) + H2O(l) --> NaOH(aq) + H2(g)
Na + H2O  Na+ + OH- + H2
Na + H2O  Na+ + OH- + H2
Active nonmetals replace less active
nonmetals from their compounds in
aqueous solution. Each halogen will
displace less electronegative (heavier)
halogens from their binary salts.
Ex. Chlorine gas is bubbled into a
solution of potassium iodide.
Cl2(g) + KI(aq) -->KCl(aq) + I2(s)
Cl2 + K+ + I- --> K+ + Cl- + I2
Cl2 + K+ + I- --> K+ + Cl- + I2
Cl2 + I-  I2 + Cl-
Tricky redox reactions that appear to
be ordinary single replacement
reactions:
Hydrogen reacts with a hot metallic
oxide to produce the elemental metal and
water.
Ex. Hydrogen gas is passed over
hot copper(II) oxide.
H2(g) + CuO(s)  Cu(s)+ H2O(l)
A metal sulfide reacts with
oxygen to produce the metallic
oxide and sulfur dioxide.
Chlorine gas reacts with dilute
sodium hydroxide to produce
sodium hypochlorite, sodium
chloride and water.
Copper reacts with concentrated
sulfuric acid to produce
copper(II) sulfate, sulfur dioxide,
and water.
Copper reacts with dilute nitric
acid to produce copper(II) nitrate,
nitrogen monoxide and water.
Copper reacts with concentrated
nitric acid to produce copper(II)
nitrate, nitrogen dioxide and
water.
COMBUSTION REACTIONS
-Elements or compounds
combine with oxygen.
Hydrocarbons or alcohols
combine with oxygen to form
carbon dioxide and water.
Ammonia combines with limited
oxygen to produce NO and water
and with excess oxygen to
produce NO2 and water.
Nonmetallic hydrides combine
with oxygen to form oxides and
water.
Nonmetallic sulfides combine
with oxygen to form oxides and
sulfur dioxide.
Ex. Carbon disulfide vapor is
burned in excess oxygen.
CS2 + O2  CO2 + SO2
Ex. Ethanol is burned
completely in air.
C2H5OH + O2  CO2 + H2O
Anhydrides
Anhydride means "without
water".
Water is a reactant in each of
these equations.
Nonmetallic oxides (acidic
anhydrides) plus water yield
acids.
Ex. Carbon dioxide is bubbled
into water.
CO2 + H2O  H2CO3
Metallic oxides (basic
anhydrides) plus water yield
bases.
Ex. Solid sodium oxide is added
to water.
Na2O + H2O 
+
Na
+
OH
Metallic hydrides (ionic
hydrides) plus water yield
metallic hydroxides and
hydrogen gas.
Ex. Solid sodium hydride is
added to water.
NaH + H2O 
+
Na + OH + H2
Phosphorus halides react with
water to produce an acid of
phosphorus (phosphorous acid or
phosphoric acid) and a
hydrohalic acid. The oxidation
number of the phosphorus
remains the same in both
compounds. Phosphorus
oxytrichloride reacts with water
to make the same products.
Ex. Phosphorus tribromide is
added to water.
PBr3 + H2O  H3PO3 + H++ Br-
Group I&II nitrides react with
water to produce the metallic
hydroxide and ammonia.
Amines react with water to
produce alkylammonium ions
and hydroxide ions.
Ex. Methylamine gas is
bubbled into distilled water.
CH3NH2 + H2O 
+
CH3NH3 + OH
OXIDATIONREDUCTION
REACTIONS
Redox reactions involve the
transfer of electrons. The
oxidation numbers of at least two
elements must change. Single
replacement, some combination
and some decomposition
reactions are redox reactions.
To predict the products of a
redox reaction, look at the
reagents given to see if there is
both an oxidizing agent and a
reducing agent. When a problem
mentions an acidic or basic
solution, it is probably redox.
Common oxidizing agents
Products
formed
MnO4- in acidic solution
Mn2+
MnO2 in acidic solution
Mn2+
MnO4- in neutral or basic solution
MnO2(s)
Cr2O72- in acidic solution
Cr3+
HNO3, concentrated
NO2
HNO3, dilute
NO
H2SO4, hot, concentrated
SO2
Common oxidizing agents
metal-ic ions
free halogens
Na2O2
HClO4
H 2O 2
Products
formed
metal-ous ions
halide ions
NaOH
ClH 2O
Common
reducing agents
Products
formed
halide ions
free halogen
free metals
sulfite ions or SO2
nitrite ions
metal ions
sulfate ions
nitrate ions
free halogens, dilute basic solution
free halogens, conc. basic solution
hypohalite ions
halate ions
metal-ous ions
H2O2
C2O42 -
metal-ic ions
O2
CO2
Ex. A solution of tin(II) chloride
is added to an acidified solution
of potassium permanganate.
2+
Sn +
4+
Sn
+ MnO4 
2+
Mn + H2O
+
H
+
Ex. A solution of potassium
iodide is added to an acidified
solution of potassium
dichromate.
+
+ Cr2O7 
3+
Cr + I2 + H2O
I
+
H
2-
Ex. Hydrogen peroxide solution
is added to a solution of iron(II)
sulfate.
H 2 O2 +
2+
Fe

3+
Fe
+ H2 O
Ex. A piece of iron is added to a
solution of iron(III) sulfate.
Fe +
3
+
Fe 
2+
Fe
ACID-BASE
NEUTRALIZATION
REACTIONS
Acids react with bases to
produce salts and water. One
mole of hydrogen ions react with
one mole of hydroxide ions to
produce one mole of water.
Watch out for information about
quantities of each reactant!
Remember which acids are
strong (ionize completely) and
which are weak (write as
molecule).
Sulfuric acid (strong acid) can be
+
2written as H and SO4 or as
+
H and HSO4 .
Ex. A solution of sulfuric acid is added
to a solution of barium hydroxide until
the same number of moles of each
compound as been added.
+
2H
2-+
2+
Ba
+ SO4
BaSO4 + 2H2O
+
2OH

(coefficients not needed, but helpful)
Ex. Hydrogen sulfide gas is
bubbled through excess
potassium hydroxide solution.
H2 S +
OH
 H2 O +
2S
Watch out for substances that
react with water before
reacting with an acid or a base.
These are two step reactions.
Sulfur dioxide gas is bubbled into an
excess of a saturated solution of
calcium hydroxide.
SO2 + H2O --> H2SO3
2+
H2SO3 + Ca +2OH -->
2H2O + CaSO3
SO2 + Ca2++ OH- 
CaSO3 + H2O
ADDITION REACTIONS
Two or more elements or
compounds combine to form a
single product.
A Group IA or IIA metal may
combine with a nonmetal to
make a salt.
A piece of lithium metal is
dropped into a container of
nitrogen gas.
Li + N2 
Li3N
Two nonmetals may combine to
form a molecular compound. The
oxidation number of the less
electronegative element is often
variable depending upon
conditions. Generally, a higher
oxidation state of one nonmetal is
obtained when reacting with an
excess of the other nonmetal.
P4 + 6Cl2  4PCl3 limited Cl
P4 + 10Cl2  4PCl5 excess Cl
When an element combines
with a compound, you can
usually sum up all of the
elements on the product side.
Ex. PCl3 + Cl2  PCl5
Two compounds combine to
form a single product.
Ex. Sulfur dioxide gas is passed
over solid calcium oxide.
SO2 + CaO  CaSO3
Ex. The gases boron trifluoride
and ammonia are mixed.
BF3 + NH3  H3NBF3
F
H
HF
F-B: + :N-H --> H-N-B-F
F
H
HF
A metallic oxide plus carbon
dioxide yields a metallic
carbonate. (Carbon keeps the
same oxidation state)
A metallic oxide plus sulfur
dioxide yields a metallic sulfite.
(Sulfur keeps the same oxidation
state)
A metallic oxide plus water
yields a metallic hydroxide.
A nonmetallic oxide plus water
yields an acid.
COMPLEX ION REACTIONS
Complex ion- the combination of
a central metal ion and its ligands
Ligand- group bonded to a metal
ion
Coordination compound- a
neutral compound containing
complex ions
[Co(NH3)6]Cl3
(NH3 is the ligand,
[Co(NH3)6]3+is the complex ion)
Common complex ions formed
in AP equations:
Complex ion Name
Formed from:
[Al(OH)4]- tetrahydroxoaluminate ion (Al or Al(OH)3 or
Al3++ OH-)
[Ag(NH3)2]+
diamminesilver(I) ion
[Zn(OH)4] 2-
tetrahydroxozincate ion
[Zn(NH3)4] 2+ tetramminezinc ion
(Ag+ + NH3)
(Zn(OH)2 + OH-)
(Zn2+ + NH3)
[Cu(NH3)4]2+ tetramminecopper(II) ion (Cu2+ + NH3)
[Cd(NH3)4] 2+ tetramminecadmium(II) ion (Cd2++ NH3)
[FeSCN] 2+
thiocyanoiron(III) ion
[Ag(CN)2]-
dicyanoargentate(I) ion
(Fe3+ + SCN-)
(Ag+ and CN-)
Adding an acid to a complex
ion will break it up. If HCl is
added to a silver complex,
AgCl(s) is formed. If an acid is
added to an ammonia complex,
NH4+ is formed.
DECOMPOSITION
REACTIONS
Reaction where a compound
breaks down into two or more
elements or compounds. Heat,
electrolysis, or a catalyst is
usually necessary.
A compound may break down
to produce two elements.
Ex. Molten sodium chloride is
electrolyzed.
2NaCl(l) 2Na + Cl2
A compound may break down
to produce an element and a
compound.
Ex. A solution of hydrogen
peroxide is decomposed
catalytically.
H2O2  H2O + O2
A compound may break down
to produce two compounds.
Ex. Solid magnesium carbonate
is heated.
MgCO3  MgO + CO2
Metallic carbonates break
down to yield metallic oxides
and carbon dioxide.
Metallic chlorates break down
to yield metallic chlorides and
oxygen.
Hydrogen peroxide decomposes
into water and oxygen.
Ammonium carbonate
decomposes into ammonia,
water and carbon dioxide.
Sulfurous acid decomposes into
water and sulfur dioxide.
Carbonic acid decomposes into
water and carbon dioxide.