Transcript Optical Sources

Optical Sources
www.bzupages.com
Optical Source
• Main function
• Convert electrical energy into optical energy (with the
condition that light output to be effectively launched or
coupled into optical fiber)
• Types
• Wideband continuous spectra (incandescent lamps)
• Monochromatic incoherent ( LEDs)
• Monochromatic coherent (LDs)
www.bzupages.com
Optical Sources
• Requirements
• Size and configuration compatible with launching light into
the fiber( light should be highly directional)
• Should be linear (accurately track the electrical input signal
,minimize the distortion & noise)
• Emit light at wavelengths where fiber has low losses,
dispersion and where detectors are efficient
• Capable of simple signal modulation (direct modulation)
ranging from audio frequencies to GHz range
• Should couple sufficient optical power to overcome
attenuation in the fiber
www.bzupages.com
Optical Sources
• Should have narrow spectral bandwidth (line width) in
order to minimize dispersion
• Must be capable of maintaining stable optical output (that
does not change with ambient conditions)
• Should be comparatively cheap and highly reliable in order
to compete with conventional transmission techniques
www.bzupages.com
Basic Concept (LASER)
• Absorption and emission of radiation
The interaction of light with matter takes place in discrete packets of energy or
quanta, called photons. The absorption and emission of light causes them to make
a transition from one state of energy to another.
• E = E2 – E1 = hf
Two types of emission
• Spontaneous (entirely random manner)
• Stimulated (photons have identical energy, in phase and polarization)
www.bzupages.com
Basic Concept (LASER)
• Population inversion
• More electrons in higher energy level
• Necessary to achieve optical amplification
• Pumping
• Process to achieve population inversion usually through external energy
www.bzupages.com
source
Basic Concept (LASER)
www.bzupages.com
Basic Concept (LASER)
• Optical feedback and laser oscillations
• Photon striking an excited atom causes emission of a
second photon which release two more photons creating
an avalanche multiplication.
• Amplification &Coherence achieved by (Febry – Perot resonator)
• Placing mirrors at either end of the amplifying medium
• Providing positive feedback
• Amplification in a single go is quite small but after multiple passes
the net gain can be large
• One mirror is partially transmitting from where useful radiation
may escape from the cavity
• Stable output occurs when optical gain is exactly matched with
losses incurred (Absorption, scattering and diffraction)
www.bzupages.com
Basic Concept (LASER)
• Optical feedback and laser oscillations
• Oscillation occur over small range of frequencies
• These frequencies achieve sufficient gain to overcome
cavity losses and radiate out
• Thus source emits over a narrow spectral band and the
device is not perfectly monochromatic
www.bzupages.com
Semi Conductor Emission
• Types of material
• Conductor
• Insulators
• Semi conductors (intrinsic & extrinsic)
• N type material
• Donor impurity added
• Increases thermally excited electrons in the conduction band
• P type material
• Acceptor impurity added
• Increases positive charges (holes) in the valance band
• PN junction
www.bzupages.com
Semiconductor
The properties of Semiconductor lies in between conductor and insulator. The
semiconductor has valance band, conduction band and Fermi level ( the gap
between two bands ). The Fermi level is relatively small which means that small
amount of energy is sufficient to bring about electric current in semiconductors.
Conduction Band
Fermi Level
www.bzupages.com
Valance
Band
The electrical resistance of semiconductor lies in between conductors and
insulators. The increase in temperature can lower the resistance in semiconductors.
Silicon is the most common semiconductor used.
The Fermi level can be increased or decreased by adding dopants into Silicon.
If P-type material such as Aluminum, Gallium or Indium are added, which
create holes and shortage of electrons. Fermi level is increased. If N-type material
such as Phosphorus, Arsenic and Boron are added the result is excess of electrons
and Fermi level is reduced.
P.N Junction
If a voltage is applied to P.N Junction
( Forward biased ). The Fermi
Level on both sides of Junction will move, so that a current will flow through the P.N
Junction. The electrons will flow into the P layer and holes are formed in N layer.
The system tries to reach equilibrium by excited electrons flowing to holes . During
this process ,energy is released in the form of Photons. It is the mechanism of Light
emitting diodes. If p layer and N layer in the P.N Junction are heavily doped and
strong current used a population inversion of electrons occurs in an Optical Cavity ,a
Laser can be created.
www.bzupages.com
Semiconductor Injection Laser
• Stimulated emission by recombination of injected
carriers
• Optical cavity provided in the crystal structure
• Advantages are
•
•
•
•
High radiance due to amplifying effect
Narrow line width of the order of 1nm
High modulation capabilities presently ranging in G Hz
Good spatial coherence which allows the output to be
focused by a lens into a spot to provide high coupling
efficiency
www.bzupages.com
Semiconductor Injection Laser
• Efficiency
• External quantum efficiency ηD
• Ratio of increase in photon output rate for a given increase in the
number of injected electrons
• ηD = (d Pe/hf) / d I/e)
• Internal quantum efficiency ηi
• Ratio of the total number of photons produced the cavity to the
number of injected electrons
• Total efficiency ηT
• Ratio of the total number of output photons to the number of
injected electrons
www.bzupages.com
Semiconductor Injection Laser
• Laser Modes
• Does not emit single wavelength but a series of
wavelengths at different modes
• Spacing of modes depends upon the length of the optical
cavity
www.bzupages.com
• Single Mode Operation
can be achieved by
Injection Laser Structure
• Types are
• Gain guided lasers
•
•
•
•
Multimode lasers
Exhibits power kinks
Operate both in short and long wavelength
High threshold current and low quantum efficiency
• Index-guided lasers
• Operate at various wavelengths with a single mode
• Threshold current is low
• Quantum-well lasers
www.bzupages.com
Injection Laser Diode (ILD)
• Distributed feedback lasers
• Elegant approach to achieve single frequency operation
• Use of distributed resonators which utilizes distributed
Bragg diffraction grating
• Provides periodic variation in refractive index
• Only modes near Bragg wavelength is reflected constructively
• Broadly classified as
• DFB
• DBR (Less well developed)
www.bzupages.com
ILD Characteristics
• Threshold current Vs Temperature
• Threshold current in general tends to increase with
temperature
• Dynamic response
• Switch-on delay followed by damped oscillations known as
relaxation oscillations
• Serious deterioration at data rates above 100 Mbps if td is
0.5 ns and RO of twice this
• td may be reduced by biasing the laser near threshold
current
• ROs damping is less straight forward
www.bzupages.com
ILD Characteristics
• Frequency Chirp
• Direct current modulation of a single mode semiconductor
laser causes dynamic shift of the peak resulting in
linewidth broadening called Frequency Chirp
• Combined with chromatic dispersion causes significant
performance degradation
• Can be reduced by biasing the laser sufficiently above the
threshold current
• Low chirp in DFB and quantum well lasers
www.bzupages.com
ILD Characteristics
• Noise
•
•
•
•
Phase or frequency noise
Instabilities like kinks
Reflection of light into the device
Mode partitioning
• Mode Hopping
• Mode hopping to a longer wavelength as the current is
increased above threshold
www.bzupages.com
ILD Characteristics
• Reliability
• Major problem in ILDs
• Device degradation occur
• Two types of degradations
• Catastrophic degradation
• Mechanical damage to mirror facet
• Results in partial or complete failure
• Gradual degradation
• Defect formation in active region
• Degradation of the current confining region
www.bzupages.com