Fitting the Human: Introduction to Ergonomics Science 295

Download Report

Transcript Fitting the Human: Introduction to Ergonomics Science 295

Dr. Katie Cahill
Science 295
The History of Ergonomics
 Foundations of ergonomic science observed in Ancient
Greece
- Hippocrates
- Egyptian Dynasties
 Term coined during World War II by Hywel Murell
 Continued with the space age
 Further developed during the information age
What is Ergonomics?
 AKA Human Factors
 Derived from Greek words ergon (work) and nomos
(law)
 According to the IEA, ergonomics is the scientific
discipline concerned with understanding of
interactions among humans and other elements of the
system, and the profession that applies theory,
principles, data and methods to design, in order to
optimize human well being and overall system
performance.
What is Ergonomics?
 Main focus is the safety of the person
 Factors:
 Body posture and movement
• Environmental factors
• Work Organization
 Interdisciplinary approach - biomechanics, physiology,
psychology, mechanical engineering, industrial
design, information technology and management
So what?
 Social Value
 Human well being, safety, health and comfort
 Reduces accidents at work, at home, etc. by reducing
human error
 Improves relationship between operators and
equipment
 Decreases absence from work


Diseases of musculoskeletal system (LBP)
Psychological illnesses (stress)
 User friendly products
So what?
 Economic Value
 Reduction of costs by preventing work related problems
 Health care costs for treatment
 Costs associated with loss of labor
 Companies can improve efficiency, worker productivity
and cost reduction
 Ergonomically designed products deliver benefits to
customers and edge out competition

Special situations – short vs. tall, overweight, handicapped,
elderly, pregnant women
Section I: The Human Body
 All humans have similar bodies
 Bodies of people evolve to meet special circumstances
 Unique climates, special diets, athletic training
 Differences in bodies within the species of mankind
 Recognize these differences to accommodate individuality
 The following chapters address these differences:
 Chapter 1 Body Sizes
 Chapter 2Mobility
 Chapter 3 Muscular Work
 Chapter 4 Body strength and load handling
Body Sizes
 Body sizes differ
 Growth cycle: quick growth during childhood,
consistency for 20 – 40 years, degenerative changes
 Men are normally taller than women
 Taller and shorter individuals
 Differing body proportions
The Earth’s Populations
 Bodies of populations described in height and weight
 Table 1.1 Average stature of 20 regions
 Anthropometrics – study of the size and proportion of
the body
 Why is it important to know the variances in body
stature?
How to measure
 May need more specific measurements than just





height and weight
Traditional method – taking measurements with hand
held devices
Emerging technique records 3D dimensions of the
human body
Figure 1.1 = most common measurements taken
Table 1.3 use of the measurements
Data is missing from many populations due to its
laborious and expensive nature
No “Average Person”
 Problems with average data
 Can’t base designs of the average because too small for
some and too large for others
 Need to take into account the extremes
 Need to understand the “normal” distribution
 Statistically analyze a distribution curve
 “bell cure” or Gaussian curve
 Majority cluster in the middle and outliers on either end
represent extremes
Normal Distribution Curve
Average and Standard Deviation
 Average is the measure of the middle or expected
value of a data set
 The standard deviation is a statistic that tells you how
tightly all the various examples are clustered around
the mean in a set of data
 With tightly bunched data, the bell-shaped curve is
steep, the standard deviation is small
 With spread apart data, the bell curve is relatively flat,
the standard deviation is large
 Smaller SD = more reliable data
Percentiles
 Numerical value of a specific point in a distribution
calculated from the mean and the standard deviation
 The mean is normally in the fiftieth percentile range;
half the data lies above and half below
 Fifth percentile is of design interest: <5% and >95%
 p5 is 1.65 SD below the mean and p95 is 1.65 SD above
the mean
 Table 1.6 Values necessary to calculate percentage
points
Hand Size Data
 Figure 1.3 and Table 1.7
 Hand measures
 Length
 Breadth of knuckles
 Maximal breadth
 Circumference at knuckles
 Wrist Circumference
Designing to Fit the Body
 Even among seemingly similar groups, body sizes and
segments differ
 Ex 1 US agriculture workers are shorter by an average of
2.5 cm than other workers
 Ex 2 Female American agriculture workers have larger
waist circumferences than other occupations
 Ex 3Protective Service workers are taller and heavier
Design Principles
1. Custom fit each individual
2. Have several fixed sizes
3. Make it adjustable
4. Design for the extreme bodies; assures any individual
can:



Operate a gadget
Fit through any opening
Cannot pass through a dangerous opening
5. Select those persons whose bodies fit the existing
design
Fit a Range
 Solutions 2 and 3 are the most common
 Allows us to select a body size range we intend to
accommodate
 Aim to accommodate the central 90%
 Exclude the top and bottom 5%; total 10% extreme
sizes
Select Design Limits
 Minimum and maximum depend on design purpose
 Several sizes (solution 2)
 Ready made clothing
 Adjustment features within a range (solution 3)
 Shoes with laces
 Office chairs
 Statics and dynamics
 Data collected is often in a static position
 Movement must be taken into account with designs
(Table 1.8)
Summary
 Fitting equipment and tasks to individuals requires:
 Anthropometric data
 Proper procedures
 Data is available on many populations, missing data
must be estimated
 Design procedures often involve selection of middle
range of the normal curve to accommodate the
majority of the population