Transcript Planmeca ProX presentation

Planmeca ProX
Planmeca ProX
• New intraoral X-ray device
• Optimal images for all diagnostic
needs: variable kV and mA
• Easy and fast to use: pre-programmed
quick settings, practical design
• Digital ready with Planmeca
ProSensor. Peferct wokflow with
Planmeca Romexis
• Versatile installation options
Optimal images for all diagnostic needs
• Small focal spot 0.4mm
• small unsharpness
• Optional long cone
• small unsharpness
• Geometric requirements for
good images are met
Optimal images for all diagnostic needs
50 kV
Lower anode voltage: higher contrast, more suitable
for endodontic, apex and bone structure diagnosis
60 kV
Medium anode voltages: broader grey scale, suitable
for caries detection
70 kV
Higher anode voltages: longest grey scale spectrum
for periodontal disease diagnosis
Optimal images for all diagnostic needs
Variable milliamperes (2 - 7 mA)
enable to use all the advantages
of the modern digital imaging
systems and new high-speed
films.
Reduced radiation
Advantages of the constant potential
(DC) X-ray generator
•Reduced radiation dose by up to 25%
when compared to conventional AC
generators
•Extremely good and uniform image
contrast
•Absolute reproducibility of images
•Improved reliability and prolonged life
span of the X-ray tube
•The X-ray unit output is not affected by
line voltage fluctuations.
Easy and fast to use
• Non-symmetric shape
• Tube head and cone have a common
smooth plane
– easy targeting along the smooth
surface
– close to the patient’s chest in
occlusal images
Easy and fast to use
Smooth movements
 Drift-free positioning
 Robust design
 No vibrations
 easy, quick and accurate
positioning

Easy and fast to use
66 pre-programmed quick settings
• modality selection to choose film, imaging
plate or sensor
• density setting
• adult/child selection
• periapicals for different teeth
• occlusal
• bite-wing / endo
•
Quick setting allow ALWAYS to have right
exposure values for individual cases
Easy and fast to use
• hand held control panel
• remote exposure station
Digital ready with Planmeca ProSensor
• Integrated magnetic connector
for digital Planmeca ProSensor
intraoral sensors
• The Planmeca ProSensor
interconnection cable is routed
inside the X-ray unit arm, which
results in a clear and clean
working area with no interfering
cables.
• The imaging parameters (kV,
mA, exposure time) are
transferred to the imaging
software to be recorded with the
patient's images.
Mounting alternatives
• Standard wall mount
• Floor column mount
• Single stud mount, coming 2012
• Pass-through mount, coming 2012
• Dental unit mount, coming 2012
• Ceiling mount (also with operating light),
coming 2012
The End
More information:
Erkki Hiltunen
Product Manager, X-rays
tel: +358 20 7795 456
[email protected]
Mark Niemi
Product Manager, X-rays
tel: +358 20 7795 743
[email protected]
12/2011