Transcript No Slide Title

Reliable and Efficient Transmission to M2M Device Groups
Document Number:
IEEE S802.16p-10/0002
Date Submitted:
2010/11/01
Source:
Hung-Yu Wei, Ching-Chun Chou
National Taiwan University (NTU)
Yan-Xiu Zheng
ITRI
*<http://standards.ieee.org/faqs/affiliationFAQ.html>
Re:
CfC: SRD of the IEEE 802.16p Mobile-to-Mobile (M2M)
Base Contribution:
IEEE C802.16p-10/0002
Purpose:
To be discussed and adopted in the 802.16p M2M SRD
Notice:
E-mail: [email protected]
E-mail: [email protected]
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in
the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
Copyright Policy:
The contributor is familiar with the IEEE-SA Copyright Policy <http://standards.ieee.org/IPR/copyrightpolicy.html>.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
M2M Applications
• M2M applications include [2]
–
–
–
–
Smart metering
Health monitoring
Vehicular
Maintenance
• Some application cases & related requirements
– Simultaneous transmissions of different traffics
– Devices with limited power
– High reliability transmission
Simultaneous Transmission of
Different QoS Traffics
• M2M devices may be transmitting traffics of different
QoS requirements.
– Smart metering
• Power outage notification
• User electricity consumption profile
– Health monitoring
• Vital problem warning
• Your walking distance
• Prioritized transmission is required
– Pre-emption is required for critical traffic
– Consider delay & reliability
Devices with Limited Power
• Most mobile devices are powered by batteries.
– Hand-held devices
– Sensors, public monitoring devices
• Energy saving is necessary
– MAC protocol should be integrated with power
saving mechanism
• To maximize power saving
– Efficient energy saving protocol
• For delay tolerant traffic
High Reliability Transmission
• The integrity of critical control message or
data should be ensured.
– Public warning devices & signals
– Emergent reporting for the M2M consumers
• Feedback is necessary to ensure the
transmission and reception.
– HARQ with ACK/NACK
– Fountain codes, network coding
Proposed Text to the IEEE 802.16p M2M SRD (1)
• 6.2.4 The 802.16p system shall support optimized signaling
for resource allocation for large numbers of M2M devices
individually or by group.
– 6.2.4.1 Pre-emptive resource allocation should be provided if
emergent signaling or data delivery is required.
• 6.2.5 The 802.16p system shall support efficient and reliable
control and data delivery to and from groups of devices.
– 6.2.5.1 Control and data delivery to and from groups of devices
shall be categorized, based on delay requirements and reliability
requirement.
– 6.2.5.2 Delay-bounded group data delivery mechanism shall be
provided to disseminate delay-sensitive information to/from a
group of M2M devices.
– 6.2.5.3 Feedback mechanism may be provided to ensure the
reliability of critical control and data delivery to/from M2M
devices for mission-critical M2M transmission.
Proposed Text to the IEEE 802.16p M2M SRD (2)
• 6.2.6 The 802.16p system shall support efficient mechanisms
for network access from large numbers of M2M devices.
– 6.2.6.1 Energy-efficient group data delivery mechanism shall be
provided to disseminate delay-tolerant information to/from a
group of M2M devices. The energy-efficient group delivery
mechanism shall be integrated with power saving mechanism of
M2M devices.
• 6.2.8 The 802.16p system shall provide mechanisms for
allowing access with different levels of priority for M2M
devices across different classes of M2M services.
– 6.2.8.1 The access of different M2M services shall be pre-emptive.
M2M transmission with higher priority level should be able to gain
access from low level ones.
References
• [1] C80216ppc-10_0014, “Project Planning
Committee (PPC): Session #69 WG Closing Plenary
Report,” IEEE 802.16PPC, 2010-09-15
• [2] C80216ppc-10_0053, “Efficient Control of a
Large Number of Devices,” Eldad Zeira, InterDigital
Communications, 2010-08-25
• [3] C80216ppc-10_0011r2, “IEEE 802.16p Machine
to Machine (M2M) System Requirements Document
(Initial Working document revised),” 2010-09-16