Transcript Name the components used in the 555 timer

1. Can you label the parts on your PCB? Use the word bank underneath
It does not matter which way
round the tilt _ _ _ _ _ _
goes. But it should lay on its
side
The _ _ _ _ _ _ has a cover to tell you
which side is the positive. Leave this
on until after testing
Please do not put
the _ _ _ _ _ _ _
into the socket
until your teacher
tells you to.
_ _ _ _ _ _ _ _,
this can be put in
facing any way
around
Make sure the light blue
stripe
(negative) on the
electrolytic _ _ _ _ _ _ _ _ _
is on the side arrowed.
You may be given a blue _ _ _ _ _ _ _
_ _ instead, it does the same job. It
may go any way round.
Capacitor, Capacitor, Battery,
Buzzer,
I.C,
Switch,
2. Can you find and label where all the parts will go on your PCB?
Do not solder the
555 _ . _ straight
in. Use a socket.
The small hole/
notch tells you
which way round
it goes
Resistor