Chapter 6 ppt
Download
Report
Transcript Chapter 6 ppt
Thermochemistry
Chapter 6
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Energy is the capacity to do work.
•
Radiant energy comes from the sun and is
earth’s primary energy source
•
Thermal energy is the energy associated with
the random motion of atoms and molecules
•
Chemical energy is the energy stored within the
bonds of chemical substances
•
Nuclear energy is the energy stored within the
collection of neutrons and protons in the atom
•
Potential energy is the energy available by virtue
of an object’s position
2
Energy Changes in Chemical Reactions
Heat is the transfer of thermal energy between
two bodies that are at different temperatures.
Temperature is a measure of the
thermal energy.
Temperature = Thermal Energy
3
Thermochemistry is the study of heat change in chemical
reactions.
The system is the specific part of the universe that is of
interest in the study.
open
Exchange: mass & energy
closed
isolated
energy
nothing
4
Review of Concept
Classify each of the following as an open
system, a closed system, or an isolated system
1. Milk kept in a closed thermal flask
2. A student reading in her form room
3. Air inside a tennis bass
5
Exothermic process is any process that gives off heat –
transfers thermal energy from the system to the surroundings.
2H2 (g) + O2 (g)
H2O (g)
2H2O (l) + energy
H2O (l) + energy
Endothermic process is any process in which heat has to be
supplied to the system from the surroundings.
energy + 2HgO (s)
energy + H2O (s)
2Hg (l) + O2 (g)
H2O (l)
6
Schematic of Exothermic and Endothermic Processes
7
Thermodynamics is the scientific study of the
interconversion of heat and other kinds of energy.
State functions are properties that are determined by the state
of the system, regardless of how that condition was achieved.
energy, pressure, volume, temperature
DU = Ufinal - Uinitial
DP = Pfinal - Pinitial
DV = Vfinal - Vinitial
DT = Tfinal - Tinitial
Potential energy of hiker 1 and hiker 2
is the same even though they took
different paths.
8
First law of thermodynamics – energy can be
converted from one form to another, but cannot be
created or destroyed.
DUsystem + DUsurroundings = 0
or
DUsystem = -DUsurroundings
C3H8 + 5O2
3CO2 + 4H2O
Exothermic chemical reaction!
Chemical energy lost by combustion = Energy gained by the surroundings
9
system
surroundings
Another form of the first law for DUsystem
DU = q + w
DU is the change in internal energy of a system
q is the heat exchange between the system and the surroundings
w is the work done on (or by) the system
w = -PDV when a gas expands against a constant external pressure
10
Work Done By the System On the Surroundings
w=Fxd
w = -P DV
DV > 0
F
P x V = 2 x d3 = F x d = w
d
-PDV < 0
w<0
Work is
not a
state
function.
Dw = wfinal - winitial
initial
final
11
Example 6.1
Pg 238
A certain gas expands in volume from 2.0 L to 6.0 L at constant
temperature.
Calculate the work done by the gas if it expands
(a) against a vacuum
(b) against a constant pressure of 1.2 atm
Example 6.2
Pg 239
The work done when a gas is compressed in a cylinder is 462 J.
During this process, there is a heat transfer of 128 J from the gas
to the surroundings.
Calculate the energy change for this process.
ENTHALPY
14
Enthalpy and the First Law of Thermodynamics
DU = q + w
At constant volume:
DU = qv − PDV
DU = qv
At constant pressure:
DU = qp − PDV
H = U + PV
DH = DU + PDV
DH = qp
15
Enthalpy (H) is used to quantify the heat flow into or out of a
system in a process that occurs at constant pressure.
DHrxn = H (products) – H (reactants)
DHrxn = heat given off or absorbed during a reaction at constant pressure
Hproducts < Hreactants
DH < 0
Hproducts > Hreactants
DH > 0
16
Thermochemical Equations
Is DH negative or positive?
System absorbs heat
Endothermic
DH > 0
6.01 kJ are absorbed for every 1 mole of ice that
melts at 00C and 1 atm.
H2O (s)
H2O (l)
DH = 6.01 kJ/mol
17
Thermochemical Equations
Is DH negative or positive?
System gives off heat
Exothermic
DH < 0
890.4 kJ are released for every 1 mole of methane
that is combusted at 250C and 1 atm.
CH4 (g) + 2O2 (g)
CO2 (g) + 2H2O (l) DH = -890.4 kJ/mol
18
Thermochemical Equations
•
The physical states of all reactants and products must be
specified in thermochemical equations.
H2O (s)
H2O (l)
DH = 6.01 kJ/mol
H2O (l)
H2O (g)
DH = 44.0 kJ/mol
19
Thermochemical Equations
•
The stoichiometric coefficients always refer to the number
of moles of a substance
H2O (s)
•
DH = 6.01 kJ/mol
If you reverse a reaction, the sign of DH changes
H2O (l)
•
H2O (l)
H2O (s)
DH = -6.01 kJ/mol
If you multiply both sides of the equation by a factor n,
then DH must change by the same factor n.
2H2O (s)
2H2O (l)
DH = 2 x 6.01 = 12.0 kJ
20
Example 6.3
Pg 244
Given the thermochemical equation:
2 SO2(g) + O2(g) 2 SO3(g)
ΔH = −198.2 kJ/mol
Calculate the heat evolved when 87.9 g of SO2 (molar mass =
64.07 g/mol) is converted to SO3.
A Comparison of DH and DU
2Na(s) + 2H2O(l)
DU = DH - PDV
2NaOH(aq) + H2(g) DH = -367.5 kJ/mol
At 25 oC, 1 mole H2 = 24.5 L at 1 atm
PDV = 1 atm x 24.5 L = 2.5 kJ
DU = -367.5 kJ/mol – 2.5 kJ/mol = -370.0 kJ/mol
22
ΔU of a gaseous reaction
*Assume ideal gas behavior
ΔU = ΔH – Δ(PV)
ΔU = ΔH – Δ(nRT)
ΔU = ΔH – ΔnRT
Δn = number of moles of product gases – number of moles
of reactant gases
23
Example 6.4
Pg 246
Calculate the change in internal energy when
2 moles of CO are converted to 2 moles of CO2
at 1 atm and 25°C:
Carbon monoxide
burns in air to form
carbon dioxide.
Because there is no way to measure the absolute value of
the enthalpy of a substance, must I measure the enthalpy
change for every reaction of interest?
Establish an arbitrary scale with the standard enthalpy of
formation (DH0f ) as a reference point for all enthalpy
expressions.
Standard enthalpy of formation (DH0f) is the heat change
that results when one mole of a compound is formed from
its elements at a pressure of 1 atm.
The standard enthalpy of formation of any element in its
most stable form is zero.
0 (C, graphite) = 0
DH
f
DH0f (O2) = 0
0 (C, diamond) = 1.90 kJ/mol
DH
0
f
DH (O ) = 142 kJ/mol
f
3
25
26
0 ) is the enthalpy of
The standard enthalpy of reaction (DHrxn
a reaction carried out at 1 atm.
aA + bB
cC + dD
DH0rxn = [ cDH0f (C) + dDH0f (D) ] - [ aDH0f (A) + bDH0f (B) ]
DH0rxn = S nDH0f (products) - S mDHf0 (reactants)
Hess’s Law: When reactants are converted to products,
the change in enthalpy is the same whether the reaction
takes place in one step or in a series of steps.
(Enthalpy is a state function. It doesn’t matter how you get
there, only where you start and end.)
27
Direct Method
ΔH°f works for compounds that can be
readily synthesized from their elements
C(graphite) + O2(g) CO2(g) ΔH°rxn = −393.5
kJ/mol
S(rhombic) + 3F2(g) SF6(g)
P4(white) + 5O2(g) P4O10(s)
C(graphite) + 2S(rhombic) CS2(l)
28
Indirect Method
Use Hess’s Law
C (graphite) + 1/2O2 (g)
CO (g)
CO (g) + 1/2O2 (g)
CO2 (g)
C (graphite) + O2 (g)
CO2 (g)
29
Example 6.9
Pg 258
Calculate the standard enthalpy of formation of acetylene
(C2H2) from its elements:
The equations for each step and the corresponding enthalpy
changes are
Example 6.10
Pg 259
The thermite reaction involves
aluminum and iron(III) oxide
This reaction is highly exothermic
and the liquid iron formed is used
to weld metals.
Calculate the heat released in
kilojoules per gram of Al reacted
with Fe2O3. The
for Fe(l) is
12.40 kJ/mol.
The molten iron formed in a
thermite reaction is run down
into a mold between the ends of
two railroad rails. On cooling, the
rails are welded together.
CALORIMETERY
32
The specific heat(s) of a substance is the amount of heat (q)
required to raise the temperature of one gram of the
substance by one degree Celsius.
The heat capacity (C) of a substance is the amount of heat
(q) required to raise the temperature of a given quantity (m)
of the substance by one degree Celsius.
C=mxs
Heat (q) absorbed or released:
q = m x s x Dt
q = C x Dt
Dt = tfinal - tinitial
33
Example 6.5
Pg 247
A 466-g sample of water is heated from 8.50°C to 74.60°C.
Calculate the amount of heat absorbed (in kilojoules) by the
water.
Constant-Volume Calorimetry
No heat enters or leaves!
35
Constant-Pressure Calorimetry
qsys = qwater + qcal + qrxn
qsys = 0
qrxn = - (qwater)
Reaction at Constant P
DH = qrxn
No heat enters or leaves!
36
Example 6.7
A lead (Pb) pellet having a mass of
26.47 g at 89.98°C was placed in
a constant-pressure calorimeter of
negligible heat capacity containing
100.0 mL of water.
The water temperature rose from
22.50°C to 23.17°C.
What is the specific heat of the
lead pellet?
Pg 252
38