Transcript Device
Information Technology
Concepts
Hardware: Input, Processing and
Output
Hardware Components
Central Processing Unit
Primary Storage (main
memory)
Secondary Storage
Input Devices
Output Devices
memory;
Hardware Components
Hardware Components
Control Unit
Part of the CPU that sequentially
accesses program instructions, decodes
them, and coordinates the flow of data
in and out of the ALU, the register,
primary storage, and even secondary
storage and various output devices.
ALU
Portion of the CPU that performs
mathematical and logical comparisons.
Hardware Components
Register
High-speed storage area in the CPU
used to temporarily hold small units of
program
instructions
and
data
immediately before, during and after
execution by the CPU.
Primary Memory
Part of the computer that
program instructions and data.
holds
Hardware Components in Action
Step
Step
Step
Step
1.
2.
3.
4.
Fetch instruction
Decode instruction
Execute the instruction
Store results
Hardware Components in Action
Step 1:
In the instruction
phase,
the
computer’s control
unit fetches the
instruction to be
executed
from
memory.
Hardware Components in Action
Step 2:
Then
the
instruction
is
decoded so the
central processor
can
understand
what is to be
done.
Step 1 & 2 are called the instruction phase, and
the time is takes to perform this phase is called
the INSTRUCTION TIME (I-time).
Hardware Components in Action
Step 3:
In the execution
phase, the ALU
does what it is
instructed to do,
making either an
arithmetic
computation or a
logical
comparison.
Hardware Components in Action
Step 4:
Then the results
are stored in the
registers
or
in
memory
Step 3 & 4 are called the execution phase. The
time it takes to complete the execution phase is
called the EXECUTION TIME (E-time).
Hardware Components in Action
After both phases have been
completed for one instruction, they
are again performed for the second
instruction, and so on.
The instruction phase followed by
the execution phase is called a
MACHINE CYCLE.
Hardware Components in Action
Some central processing units can speed
up processing by using PIPELINING.
Whereby the CPU gets one instruction,
decodes another, and executes a third at
the same time.
The Pentium processor, for example, uses
two execution unit pipelines.
This gives the processing unit the ability
to execute two instructions in a single
machine cycle.
Processing & Memory Devices
Processing Characteristics and
Functions
Machine cycle time is measured in:
Microseconds (1 millionth) for slower
computers
Nanoseconds (1 billionth)
Picoseconds (1 trillionth) for faster
ones.
MIPS (Millions of Instructions Processed
per Second)
Wordlength and Bus Line Width
Data is moved within a computer
system not in a continuous stream
but in groups of bits. A Bit (BInary
DigiT) 0 or 1.
Therefore, another factor affecting
overall
system
performance,
particularly speed is the number of
bits the CPU can process at any one
time.
Wordlength and Bus Line Width
This
number of bits is called the
Wordlength of the CPU.
A CPU with a wordlength of 32
(called a 32-bit CPU) will
process 32 bits of data in one
machine cycle.
Wordlength and Bus Line Width
Data is transferred from the CPU to other
system components via Bus lines, the
physical
wiring
that
connects
the
computer system components.
The number of bits a bus line can transfer
at any time is known as bus line width.
A bus line with a width of 32 will transfer
32 bits of data a time.
Common wordlength and bus line widths
are 32 and 64.
Memory Characteristics and
Functions
Storage Capacity
Types of Memory
Types of Memory
Random Access Memory
(RAM).
Dynamic RAM (DRAM).
Synchronous
DRAM
(SDRAM).
SDRAM also has the
advantage of a faster
transfer speed between
the microprocessor and
the memory.
Types of Memory
Read Only Memory (ROM)
Programmable Read Only
Memory
(PROM).
Commonly used in video
games.
Erasable
Programmable
Read
Only
Memory
(EPROM). Commonly used
with industrial robots and
as a computer setup chip.
Read-Only Memory (ROM)
Can be read but cannot be written to
Nonvolatile
BIOS
Erasable ROM (EEPROM):
Flash memory
Can be written to and erased
Secondary storage /
Removable
Cache Memory
Cache Memory is a type of high-speed memory
that a processor can access more rapidly than
main memory.
Cache Memory works in conjunction with main
memory.
Cache Memory
A cache controller determines how often
the data is used and transfer frequently
used data to cache memory, then deletes
the data when it goes out of use.
Multiprocessing
A number of forms of Multiprocessing involves
the simultaneous execution of two or more
instructions at the same time.
One
form
of
multiprocessing
involves
coprocessors.
A Coprocessor speeds processing by executing
specific types of instructions while the CPU works
on another processing activity.
For example, math coprocessor chip can be used
to speed mathematical calculations, and a
graphics coprocessor chip decreases the time it
takes to manipulate graphics.
Massively Parallel Processing
Parallel
Processing,
a
form
of
multiprocessing
that
speed
processing
by
linking
several
processors
to
operate at the
same time, or in
parallel.
Massively Parallel Processing
With
Parallel
Processing,
a
problem is divided
into several parts.
Each part is “solved”
by
a
separate
processor.
The result from each
processor are then
assembled to get the
final output.
Secondary Storage
Secondary Storage (Permanent Storage)
Secondary storage devices that
store larger amount of data,
instructions, and information more
permanently than allowed with main
memory.
Offers
the
advantages
of
nonvolatility, greater capacity, and
greater economy
Access Methods
Sequential: records must be
retrieved in order
Devices used are called sequential
access storage devices (SASD)
Direct: records can be retrieved in
any order
Devices used are called direct access
storage devices (DASDs)
Devices
Magnetic tapes
Magnetic disks
RAID (Redundant array of
independent/inexpensive disks)
Storage area networks (SAN)
Optical disks
Digital versatile disks (DVDs)
Devices
Magnetic Disks are also coated
with iron oxide; they can be thin
steel platters (Hard Disk or
Diskettes).
Hard Drives and Diskettes
Hard Drives
Several magnetic
disks
Read/write heads
High storage
capacity
Diskettes
Portable magnetic
media
Types of Secondary Storage
Magnetic Tapes and Disks, Optical Disks, and CDROMs, and DVD’s are used to store data for easy
retrieval at a later date.
Devices
Magnetic tapes (Common
secondary storage medium, Mylar
film coated with iron oxide with
portions of the tape magnetized to
represent bits.
Devices
Magnetic Disks are also coated
with iron oxide; they can be thin
steel platters (Hard Disk or
Diskettes).
Devices
RAID
(Redundant
array
of
independent/inexpensive disks) is a
method of storing data that generates
extra bits of data from existing data,
allowing
the
system
to
create
“reconstruction map” so that if a hard
drive fails, it can rebuild lost data.
RAID sub-systems duplicate data on
drives. This process is called DISK
MIRRORING.
Devices
SAN (Storage Area
Network)
uses
computer
servers,
distributed storage
devices,
and
network
to
tie
everything together.
To
increase
the
speed of storing and
retrieving
data,
fiber-optic channels
are often used.
Devices - Optical Disk Storage
Uses laser beam technology to read
and write.
Optical Disks a rigid disk of plastic onto which
data is recorded by special lasers that physically
burn pits in the disk.
CD-ROM (Compact Disk Read Only Memory) a
common form of optical Disks on which data, once
it has been recorded, cannot be modified.
CD-W (CD-Writeable) an optical disk that can
written upon but only once.
CD-RW (CD-Rewriteable) on optical disk that
allows personal computer users to replace their
diskettes with high-capacity CDs that can be
written upon and edited over.
Devices
Digital Versatile Disk Player
(DVD) look like CDs but have a
much greater storage capacity and
can transfer data at a much faster
rate.
Additional Devices and Media
Memory cards (The PC memory
card is like a portable hard disk that
fits into PC Card slot.
Flash memory (A silicon computer
chip that, unlike RAM, is nonvolatile
and keeps its memory when the
power is shut off).
Additional Devices and Media
Expendable Storage (Allow users to add
additional storage capacity by simply
plugging in a removable disk or cartridge.
The disk can be used to back up hard disk
data or to transfer large files to
classmates.
Secondary Storage
Comparison of methods of secondary storage
Input and Output Devices
Input Devices
Personal computer
input devices
Keyboard
(QWERTY)
Virtual Laser
Keyboard
Virtual Laser Keyboard
Input Devices
Pointing and Selecting Devices
E.g., mouse, light pen, touch pad, touch screen,
joystick, and eye-tracking device
Input Devices
Scanning Devices (Entering Batch Data)
Scanner (Used for repetitive information)
a.
b.
Handheld scanner
Flatbed scanner
Input Devices
Audio - sound that has been digitized
Voice Input
Microphone
Speech recognition
Voice-to-text
software
Input Devices
Digital Video cameras (make it possible
for people at distant locations to conduct
videoconferences, thereby eliminating the
need for expensive travel to attend
physical meetings.
Input Devices
Point of Sale (POS) Devices
Credit/Debit Card Reader
Biometric devices
Read:
Fingerprints
Face geometry
Input Devices
Magnetic Ink Character Recognition
(MICR) Device
Other Scanning Technologies
Text recognition software
Optical character recognition (OCR)
Optical mark recognition (OMR)
Output Devices
Display monitors
Output Devices
Display monitors
CRT- Cathode Ray Tube
The quality of Screen is often measured
by the number of horizontal and vertical
pixels used to create it.
A larger number of pixels per square inch
means a higher resolution, or clarity and
sharpness of the image.
For example, a screen with a 1024 x 768
resolution (786432 pixels) has a higher
sharpness than one with 640 x 350
(224000 pixels).
Output Devices
Display monitors
The distance between one pixel on
the screen and the next nearest
pixel is known as DOT PITCH.
The common range of dot pitch is
from .25mm to .31mm.
The smaller the number, the better
the picture.
Output Devices
Display monitors
Monochrome (One of the three
colors: Gray, green, or amber).
CGA (Color Graphic Adaptor) was
one of the first technologies to
display color images on the screen.
SVGA (Super Video Graphics Array)
displays are standard, providing
brilliant
colors
and
higher
resolutions.
Output Devices
Display monitors
LCD (Liquid Crystal Displays)
Flat Panel Displays that’s use liquid crystal
organic, oil-like material placed between two
polarizers
to form characters and graphic
images on a backlit screen.
Passive-Matrix displays, the CPU sends its
signals to transistors around the borders of the
screen, which control all the pixels in a given
row or column.
Active-Matrix display, each pixel is controlled
by its own transistor attached in a thin film to
the glass behind pixel.
Printers and Plotters
Output Devices
Printers
Daisy Wheel
Plotters
Dot Matrix
80 Columns
120 Columns
Ink Jet
Laser Jet
Computer Output Microfilm
(COM) Devices
Output Devices - Audio Output
Sound card and speakers
Sound card translates digits into
sound
Also used to capture sound
Other audio output
E.g., USB headphones
Computer System Types
Supercomputers
Typically
use
for
Scientific applications,
marketing,
customer
support,
product
development).
Memory: 500+ GB
Computer System Types
Mainframe Computers
Typically use for large general
purpose
business
&
Government computing need
to meet the goals.
Memory: <100+ GB
Computer System Types
Personal Computers
Handheld fitting on desktop, typically use to
improve personal productivity of a worker
Memory: 512MB - 2GB
Computer System Types - Portable
Computers
Notebook computers
Light weight
Battery powered
Limited expandability
Docking stations
Computer System Types - Tablet PCs
Type of notebook that accepts input from an
electronic pen
a.
b.
Slate model
Convertible model
Computer System Types
Small computers that can be
carried in a pocket
Niche in the portable
computers market
Handheld Computers
Personal digital assistants
(PDAs)
Cell phones
Most popular manufacturers
RIM – Blackberry
Palm – Treo