Transcript Lab – Week 3 Preparing a Simple and Endospore Stain

Lab 3: Visualizing and Identifying Microorganisms:
Gram and Acid-Fast Staining
Gram positive
Gram negative
Why do we need to stain microorganisms?
Bacterial Smears
•
Before bacteria can be stained a smear must be made and
fixed.
•
A bacterial smear is made by spreading bacteria on a clean
slide and allowing it to air dry or place on electric slide
warmer.
•
The slide is passed over the incinerator to heat fix the
bacteria.
Preparing a Bacterial Smear
1.
2.
3.
4.
Get clean microscope slide (handle carefully, no fingerprints!)
Vortex (mix) the broth culture until it is cloudy (or add 1-2 drops of
water to the slide if the starter culture a solid)
Using a loop, spread a thin film of bacteria (smear) on the slide
and let it air dry
Gently heat the slide by placing it near the front of the incinerator
or on the electric slide warmer to fix the bacteria onto the slide
For Gram Stain Lab your slide should look
like this.
For Acid-Fast Stain Lab your slide should
look like this.
Part 1: The Gram Stain
• The Gram Stain is a differential stain used to classify Gram
positive and negative bacteria.
• Developed by Hans Christian Gram in 1884 when he was
studying bacteria from different respiratory diseases.
• The single most important technique in microbiology.
Reagents for Gram Staining
• Crystal violet (CV): primary stain; all bacteria stain blue.
• Grams Iodine (I): not a stain; it forms a crystal violet—iodine complex
inside the cell wall.
• Decolorizer: ethyl alcohol, used to remove the primary stain. It removes
the CV-I complex from cells without teichoic acid.
• Safranin: a counter stain; it stains the decolorized cells a red color.
What’s the difference in a Gram positive vs. gram negative cell?
*Gram positive bacteria have many layers of peptidoglycan in their cell wall
making it easier to hold onto the CV-I complex.
*Gram negative bacteria have one layer of peptidoglycan. Thus the CV-I
complex is not retained in the cell.
The Gram Stain
The uptake and retaining of the dye depends on the cell wall.
Gram Staining
Gram Stain Lab Procedure
The detailed procedure can be found on pages 34-35
Part 2: Acid-Fast Staining
• Acid fast is a differential stain that detects acid-fast and non-acid
fast organisms.
• Acid fast bacteria have a waxy cell wall (mycolic acid) that makes
them difficult to stain with traditional methods.
Acid-fast positive (red)
Acid-fast negative (blue)
Part 2: Acid-Fast Staining
Reagents used in Acid-fast staining:
• Carbol fuchsin: fuchsin is the red dye and carbol is the acid (carbolic acid)
• Acid alcohol: decolorizer
• Methylene blue: a blue counter stain
Acid-fast positive (red)
Acid-fast negative (blue)
Acid-Fast Staining: Kinyoun Method
Acid-Fast Stain (Kinyoun) Procedure
The detailed procedure can be found on pages 41-42
Assignments for this week
Lab Reports
- Gram stain: all questions
- AF stain: drawings and questions 2-4
Lab 2: Examining Human Specimens
Lab 2: Examining Human Specimens
Lab 2: Examining Human Specimens