Activity 3.2: Disk Diffusion Test
Download
Report
Transcript Activity 3.2: Disk Diffusion Test
Microbiology and
Cell Culture
Activity 3.2: Disk Diffusion Test
(Modified Kirby-Bauer Test)
Activity 3.2: Disk Diffusion Test
Research Question
– Which antimicrobial agent is most effective against E. coli
HB101 bacteria?
Objectives
– Make one 100 mm LB agar plate
– Set up a disk diffusion assay using three chemicals and one
negative control
– Evaluate the antimicrobial properties of three chemicals
2
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Safety Reminders
Follow all laboratory safety procedures
– If you are allergic to antibiotics, tell your instructor
and do not handle the ampicillin antibiotic
– Never use the autoclave unless under the direct
supervision of the instructor
– Use aseptic technique when using bacteria
– Wear appropriate PPE
3
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Skills to Master
Perform a modified Kirby-Bauer test
Use aseptic technique (Activity 3.1)
Inoculate an agar plate for a bacterial lawn
4
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Tips
When placing the disks on the agar surface,
remember to hold lid directly above the plate as a
shield
Use sterile forceps to handle the disks
When placing the disks onto the surface of the agar,
press them gently with forceps to ensure that they
stick when the plate is inverted
5
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Student Workstation Materials
6
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Performing a Modified Kirby-Bauer Test
Play video: Modified Kirby-Bauer Test
7
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Protocol Highlights/Tips
8
Remember to use appropriate safety
equipment
Follow the aseptic technique at all
times
Use sterile forceps to place disks
onto the agar surface
When streaking the plate for a
bacterial lawn, ensure that the
bacteria are evenly spread across the
entire surface
Place agar plate atop a piece of
paper with an X drawn on it as a
guide to draw the X on the bottom of
the agar plate
Label all quadrants with the proper
labels
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com
Summary
Make sure to:
– Record all steps in your notebook
– Be careful and wear heat-resistant gloves when handling hot
agar or broth
– Follow all tips
– Incubate with agar side up in an incubator at 37ºC
– Measure the zone of inhibition around each disk
– Bleach or autoclave plates upon the completion of the
experiment
9
Biotechnology: A Laboratory Skills Course | explorer.bio-rad.com