Transcript Chapter 7 - How Firms Make Decisions

Firms’ Decisions
•
•
•
•
•
The goal of profit maximization
Two definitions of profit
The firm’s constraints
The total revenue and total cost approach
The marginal revenue and marginal cost
approach
• short-run: shut down rule
• Long-run: exit rule
1
The Goal Of Profit Maximization
• What is the firm trying to maximize?
• A firm’s owners will usually want the firm to
earn as much _____ as possible
• We will view the firm as a single economic
decision maker whose goal is
to_______________
• Why?
2
Understanding Profit: Two
Definitions of Profit
• Profit is defined as the firm’s sales revenue minus its costs
of production
• If we deduct only costs recognized by accountants, we get
one definition of profit
– ____________ = Total revenue – Accounting costs
• A broader conception of costs (opportunity costs) leads to
a second definition of profit
– ____________= Total revenue – All costs of production
– Or Total revenue – (Explicit costs + Implicit costs)
• Proper measure of profit for understanding and predicting
firm behavior is economic profit
3
Why Are There Profits?
• Economists view profit as a payment for two
necessary contributions
• Risk-taking
– Someone—the owner—had to be willing to take
the initiative to set up the business
• This individual assumed the risk that business might
fail and the initial investment be lost
– Innovation
• In almost any business you will find that some sort of
innovation was needed to get things started
4
The Firm’s Constraints: The
Demand Constraint
• Demand curve facing firm is a profit constraint
– Curve that indicates for different prices, quantity of
output customers will purchase from a particular firm
• Can flip demand relationship around
– Once firm has selected an output level, it has also
determined the ________ price it can charge
• Leads to an alternative definition
– Shows __________ price firm can charge to sell any
given amount of output
5
Figure 1: The Demand Curve
Facing The Firm
6
Total Revenue
• The total inflow of receipts from selling a
given amount of output
• Each time the firm chooses a level of output,
it also determines its total revenue
– Why?
• Total revenue—which is the number of units
of output times the price per unit—follows
automatically
TR=P*Q
7
The Cost Constraint
• Every firm struggles to reduce costs, but there is a
limit to how low costs can go
– These limits impose a second constraint on the firm
• The firm uses its production function, and the
prices it must pay for its inputs, to determine the
least cost method of producing any given output
level
• For any level of output the firm might want to
produce
– It must pay the cost of the “__________” of production
8
The Total Revenue And Total Cost
Approach
• At any given output level, we know
– How much revenue the firm will earn
– Its cost of production
• Loss
– A negative profit—when total cost exceeds total
revenue
• In the total revenue and total cost approach, the
firm calculates Profit = TR – TC at each output
level
– Selects output level where profit is greatest
9
The Marginal Revenue and Marginal
Cost Approach
• Marginal Cost
Change in total cost from producing one
more unit of output
• MR = ________
• Marginal revenue
– Change in total revenue from producing one
more unit of output
• MR = _________
• MR tells us how much revenue rises per
unit increase in output
10
The Marginal Revenue and Marginal
Cost Approach
• Important things to notice about marginal revenue
– When MR is ____, an increase in output causes total revenue to rise
– Each time output increases, MR is ______ than the price the firm
charges at the new output level
• When a firm faces a downward sloping demand curve, each
increase in output causes
– Revenue gain
• From selling additional output at the new price
– Revenue loss
• From having to lower the price on all previous units of output
– Marginal revenue is therefore less than the price of the last unit of
output
11
Using MR and MC to Maximize
Profits
• Marginal revenue and marginal cost can be used
to find the profit-maximizing output level
– Logic behind MC and MR approach
• An increase in output will always raise profit as long as
marginal revenue is greater than marginal cost (MR > MC)
– Converse of this statement is also true
• An increase in output will lower profit whenever marginal
revenue is less than marginal cost (MR < MC)
– Guideline firm should use to find its profit-maximizing
level of output
• Firm should increase output whenever MR > MC, and decrease
output when MR < MC
12
Profit Maximization Using Graphs
• Both approaches to maximizing profit (using totals
or using marginals) can be seen even more
clearly with graphs
• Marginal revenue curve has an important
relationship to total revenue curve
• Total revenue (TR) is plotted on the vertical axis,
and quantity (Q) on the horizontal axis
– Slope along any interval is ΔTR / ΔQ
– Which is the definition of marginal revenue
• Marginal revenue for any change in output is equal to slope of
total revenue curve along that interval
13
Figure 2a: Profit Maximization
Dollars
$3,500
TC
3,000
Profit at 7
Units
2,500
Profit at 5
Units
2,000
Profit at 3
Units
1,500
1,000
DTR from producing 2nd unit
500
Total Fixed
Cost
TR
DTR from producing 1st unit
0
1
2
3
4
5
6
7
8
9
10
Output
14
Figure 2b: Profit Maximization
Dollars
600
MC
500
400
300
200
100
0
–100
–200
1
2
3
profit rises
4
5
6
7
profit falls
8
Output
MR
15
The TR and TC Approach Using
Graphs
• To maximize profit, firm should
– Produce quantity of output where vertical
distance between TR and TC curves is greatest
and
– TR curve lies above TC curve
16
The MR and MC Approach Using
Graphs
• Figure 2 also illustrates the MR and MC approach
to maximizing profits
• Can summarize MC and MR approach
– To maximize profits the firm should produce level of
output closest to point where __________
• Level of output at which the MC and MR curves intersect
• This rule is very useful—allows us to look at a
diagram of MC and MR curves and immediately
identify profit-maximizing output level
• Different types of average cost (ATC, AVC, and
AFC) are irrelevant to earning the greatest
possible level of profit
17
Using The Theory: Getting It Wrong—
The Failure of Franklin National Bank
• In the mid-1970’s, Franklin National Bank—one of
the largest banks in the United States—went
bankrupt
• In mid-1974, John Sadlik, Franklin’s CFO, asked
his staff to compute average cost to bank of a
dollar in loanable funds
– Determined to be 7¢
– At the time, all banks—including Franklin—were
charging interest rates of 9 to 9.5% to their best
customers
– Ordered his loan officers to approve any loan that could
be made to a reputable borrower at 8% interest
18
Using The Theory: Getting It Wrong—
The Failure of Franklin National Bank
• Where did Franklin get the additional funds it was
lending out?
– Were borrowed not at 7%, the average cost of funds,
but at 9 to 11%, the cost of borrowing in the federal
funds market
• Not surprisingly, these loans—which never should
have been made—caused Franklin’s profits to
decrease
– Within a year the bank had lost hundreds of millions of
dollars
– This, together with other management errors, caused
bank to fail
19
Using The Theory: Getting It Right—
The Success of Continental Airlines
• Continental Airlines was doing something that
seemed like a horrible mistake
– Yet Continental’s profits—already higher than industry
average—continued to grow
• A serious mistake was being made by the other
airlines, not Continental
– Using average cost instead of marginal cost to make
decisions
• Continental’s management, led by its vicepresident of operations, had decided to try
marginal approach to profit
20
An Important Proviso
• Important exception to this rule
– Sometimes MC and MR curves cross at two
different points
– In this case, profit-maximizing output level is
the one at which MC curve crosses MR curve
from below
21
Figure 3: Two Points of Intersection
Dollars
MC
A
B
MR
Q1
Q*
Output
22
Figure 4: Loss Minimization
Dollars
TFC
Q*
Output
23
Dealing With Losses: The Short Run
and the Shutdown Rule
• You might think that a loss-making firm should always shut down its
operation in the short run
– However, it makes sense for some unprofitable firms to continue operating
• The question is
– Should this firm produce at Q* and suffer a loss?
• The answer is yes—if the firm would lose even more if it stopped producing
and shut down its operation
• If, by staying open, a firm can earn more than enough revenue to
cover its operating costs, then it is making an operating profit (TR >
TVC)
– Should not shut down because operating profit can be used to help pay
fixed costs
– But if the firm cannot even cover its operating costs when it stays open, it
should shut down
24
Dealing With Losses: The ShortRun and the Shutdown Rule
• Guideline—called the shutdown rule—for a lossmaking firm
– Let Q* be output level at which MR = MC
– Then in the short-run
• If TR >TVC at Q* firm should keep producing
• If TR < TVC at Q* firm should shut down
• If TR = TVC at Q* firm should be indifferent between shutting
down and producing
• The shutdown rule is a powerful predictor of firms’
decisions to stay open or cease production in
short-run
25
Figure 4: Loss Minimization
Dollars
MC
Q*
MR
Output
26
Figure 5: Shut Down
Dollars
TC
TVC
Loss at Q*
TFC
TR
TFC
Q*
Output
27
The Long Run: The Exit Decision
• We only use term shut down when referring
to short-run
• If a firm stops production in the long-run it is
termed an exit
• A firm should exit the industry in long- run
– When—at its best possible output level—it has
any loss at all
28