Transcript 18.8 Electrolysis: Driving Non-Spontaneous Chemical Reactions

18.8 Electrolysis: Driving Non-Spontaneous
Chemical Reactions with Electricity
Electrolytic Cell: The Process of Electrolysis
• An electrolytic cell differs from a voltaic (galvanic)
cell in that in an electrolytic cell, an external power
source must be used to force a non-spontaneous
reaction.
• In an electrolytic cell, electrical energy is needed to
produce chemical energy (the exact opposite of
what happens in a voltaic cell).
• The process of driving a non-spontaneous reaction
using electrical current is known as electrolysis.
Applications of Electrolysis
• Forcing non-spontaneous reactions such as the
separation of:
• Water into hydrogen and oxygen gas. The hydrogen gas could
be used to power hydrogen fuel cell vehicles.
• Produce metals from metal oxides, or salts. For example,
electrolysis of molten sodium chloride produces solid sodium.
• Electroplating valuable metals onto cheaper metals.
Summarizing Characteristics of Electrochemical Cells
• Oxidation always occurs at the anode
• Reduction always occurs at the cathode
• Now for the differences:
– In a voltaic cell:
• The anode is the source of electrons and has a negative charge (anode -)
• The cathode draws electrons and has a positive charge (cathode +)
– In an electrolytic cell:
• Electrons are drawn away from the anode, which must be connected to the
positive terminal of the external power source (anode +)
• Electrons are forced to the cathode, which must be connected to the
negative terminal of the power source (cathode -)
Basically, in an electrolytic cell, the anode becomes the cathode and viseversa. But again, oxidation always occurs at the anode, and reduction at the
cathode.
Predicting Products of Electrolysis
Electrolysis of:
• Molten salts:
– During the electrolysis of a molten salt the _______ would be oxidized and the
_______ would be reduced. (Choices are: cation and anion).
Anion would be oxidized and the cation would be reduced. (remember, the only
species present when a salt is molten are ions.)
• Mixtures of cations and anions:
– What if a mixture molten salts is present, so that there may be more than one
cation and more than one anion…which one would be oxidized and which
would be reduced?
• To answer this question, we need to look at the table of standard electrode potentials.
The cation with the more positive (higher) voltage will be more easily reduced, and the
anion with the more negative (lower) voltage would be more easily oxidized.
• If there was a mixture of molten NaCl(l) and KCl(l) which cation would be reduced at the
electrode?
– Na, because it has a more positive (or less negative) electrode potential.
• If there was a mixture of molten NaCl(l) and NaBr(l), which anion would be more easily
oxidized at the electrode?
– Br, because it has a lower cell potential.
– N.I.O. and P.I.R. (Negative is oxidized and positive is reduced)
Stoichiometry of Electrolysis
• Faraday's law of electrolysis - The amount of a substance consumed or produced at
one of the electrodes in an electrolytic cell is directly proportional to the amount of
electricity that passes through the cell.
• From the college board:
• The a balanced redox reaction can be used to determine the stoichiometric mole
ratios of electrons to reactants or products.
• This along with the relationship between charge and the number of moles of
electrons, Faraday’s constant, can be used to solve problems involving the
stoichiometry of electrolytic cells.
• Also remember, 1 A = 1 C/s  on your reference table!
Let’s Try a Practice Problem!
Silver can be plated out of a solution containing Ag+ according to the half-reaction:
Ag+(aq) + e-  Ag(s)
How much time (in minutes) would it take to plate 12 g of silver using a current of 3.0 A?
According to the balanced reduction half-reaction above, it takes 1 mol e- to plate 1 mol Ag(s).
Using the periodic table, we can see how may grams 1 mol Ag(s) is weighs.
107.87 g
1 mol x ------------ = 107.87 g
1.00 mol
Now, we can mathematically solve for how may moles of silver are weigh 12 g:
1.00 mol Ag(s)
12.0 g Ag(s) x -------------------- = 1.11x10-1 mol Ag(s)
107.87 g Ag(s)
(continued )
According to Faraday’s constant: 96,485 coulombs of
charge are produced per mole of electrons and due to
the fact that mol:mol ratio of Ag to e- is 1:1 …:
96,485 C
1.11x10-1 mol e- x --------------- = 1.07x105 C
mol eNow using the relationship between current and
charge/sec:
1.07x105 C
t = ------------------- = 3.6 x103 s convert to minutes
3.0 A
1.00 min
3.6x103 s x -------------- = 6.0x101 min
60 s
Predicting Products of Electrolysis (continued)
• Aqueous solutions:
– Predicting the species that oxidized and that which is reduced in
aqueous solution is a little bit more challenging. In aqueous solution,
water is present, so we must take into account that water can also
either be oxidized or reduced. In order to make the prediction here, we
must once again think N.I.O. and P.I.R. and make sure to take water into
account.
What would be oxidized and what would be reduced during the
electrolysis of aqueous NaI(aq)? (use the following electrode potentials for
pure water at room temperature, because pure water at room temp. is not
standard: [OH-]=[H+]=1.0x10-7 M. : Oxidation (anode) = 0.82 V, and
reduction (cathode) = -0.41 V)
The iodide ion is oxidized at the anode, and water would be reduced at the
cathode. Which gas would be produced at the cathode?
Hydrogen gas!
Let’s Try a Practice Problem!
Predict the half-reactions occurring at the anode and cathode for the electrolysis of
aqueous Na2SO4?
Let’s lay out our options:
2Na+(aq) + SO42-(aq)  Sodium can only be reduced and sulfate can only be oxidized.
Now let’s compare each to water:
Na+(aq) + e-  Na(s) Eo = -2.71 V
2H2O(l) + 2e-  H2(g) + 2OH-(aq) E= -0.41 V
Water is reduced at the cathode.
SO42-(aq) + 4H+(aq) + 2e-  H2SO4(aq) + H2O(l) Eo = 0.20 V
2H2O(l)  O2(g) + 4H+(aq) + 4e- E = 0.82 V
Sulfate is oxidized at the anode.
18.8 pg. 907 #’s 90, 96a, 98, & 100
Study for Quiz on Chapter 18