Transcript Presentation Power Gear

Power Gear Rolling Case
Name: Ephel Jules
Advisor: Dr. Antonio Soares
EET4950 -001 - 2148: TECH DESIGN PROJECT PROPOSAL
Date: December 08, 2014
Outline
•
Introduction – Why
•
Task – my main objective
•
Equipment– explain each component
•
Specification
•
Design Implication
•
Flow Block Chart
•
Total Coast
•
Reference
•
Question
Introduction
• In many cases, when traveling; you will find yourself low on power to your
probable device with no plug near by. Or in many case, people will use the plug to
charge their phone and you be left out
• Or when traveling to your next destination, you may have trouble carrying out a
signal when making a call on the phone or getting on the internet.
• My Idea for this project was to use a workcase and create probable voltage
generator to power up any probable device such as a phone, a tablet, an ipod or
mp3; into a usb voltage output. With the option to use internet and make calls
• Also create a way where is easier to carry your luggage when traveling to the an
airport or to a bus station.
Task
•
My goal for this project is to design a suitcase that has a combination of battery charger and use a DC
Servo Motor as a voltage generator that will be attach to a voltage output that create power. Add a
Arduino GSM shield that will allow the user to to call, text, and connect to the internet over the GSM
network
•
Use a Gyroscope, as a sensor to active the servo when tilt; will be sending a signal to Arduino and then
telling the servo motor turn on.
•
Also a charge controller will be implement to charge a battery to a USB adapter as the output.
•
Add a voice receiver, for voice recognition which be moving handle up and down on its own.
•
Reliable to the user.
•
More convenient
•
New and better way of traveling
Equipment
• A Rolling Case
• (2) Dc Servo Motor
• Gyroscope ( Gyro Sensor )
• bq24650 Battery Charge Controller
• USB Adapter
• Arduino Uno ( Micro Controller)
• Arduino GSM Shield
• Voice Recognition System: module ES6928P
Equipment Detail
VEX IQ Gyro sensor:
Bq24650 Battery Charge Controller:
Voice Recognition module ES6928P
Equipment Detail
continue
• Arduino Uno:
Arduino GSM Sheild:
AC, DC & Servo Motors TINKERKIT SERVO:
Specification
• Motion will trigger the Tilt sensor
•
•
•
•
•
minimum angle: 20 degrees
The rollingcase will be voice controlled, which will be use
for handle.
On/Off switch
Maximum weight: 20 pounds
Speed controlled base on position
Increasing Power to the motors is up to the incline of the
rolling case.
Design Implication
Block Flow Diagram
Total Coast
• A Rolling Case: be provided
• (2) Dc Servo Motor: $ 15
• Gyroscope ( Gyro Sensor ): $30
• bq24650 Battery Charge Controller: $50
• USB Adapter: will be provided
• Arduino Uno ( Micro Controller): $15
• Arduino GSM Shield: $90
• Voice Recognition System: module ES6928P: $23
Time Line
Novemb
er/
Decemb
er
• Meet with
advisor. What can
be change and
improve.
January
• Gather Parts &
cost analysis.
February
• Design & Built
March
•Troubleshooti
ng
April
•Present
Reference
• http://arduino.cc/en/Guide/Introduction
• http://playground.arduino.cc/Main/AdafruitMotorShield
• http://www.instructables.com/id/How-To-Use-The-TalkingES6928P-Voice-Recognition-S/
• http://www.outbackpower.com/outback-products/chargecontrollers/item/flexmax-6080?category_id=438
• http://www.vexrobotics.com/228-3014.html
• http://www.mouser.com/search/Refine.aspx?Keyword=11836
2466&Ns=Pricing%7c0&FS=True&Ntk=P_MarCom
Questions